Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM25041501
RYLR498 with UART Interface can work at 426/ 433/ 490MHz LoRa Transceiver Module, which provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
Reference: DWM25041101
1 Male to 2 Female Battery Extension Parallel Cable W 12AWG Wire XT60 Plug, Male head connects with aircraft, the other two heads connect with batterys.
Reference: DWM25041002
1 Male to 3 Female Parallel Battery Connector Extension Parallel Cable W 12AWG Wire XT60 Plug, Female head connects with aircraft, the other three Male heads connect with batteries.
Reference: DWM25041001
1 Female to 3 Male Parallel Battery Connector Extension Parallel Cable W 12AWG Wire XT60 Plug, Female head connects with aircraft, the other three Male heads connect with batterys.
Reference: DWM25040101
10-in-1 Multi-function Battery Charger adaptor with banana connector as main wire includes Deans Ultra T-Plug, EC5, Tamiya large plug, Tamiya small plug, XT90, XT60, JST, JR / Futaba, and Alligator clips(pair) branch wires.
Reference: DWM25032802
19-in-1 multi-function charger adaptor with 4.0MM golden connector to Female Tamiya, Dean, Futaba, TRX, XT60 male, EC3, JST, ext multi-function lead RC charger adaptor.
Reference: DWM25032801
XT60 Multi-function charger adaptor with XT60 Plug to Female Tamiya, Dean, Futaba, TRX, XT60 male, EC3, JST, multi-function lead RC charger adaptor.
Reference: DWM25032501
Microhard P2400 - Miniature 1W 2.4 GHz Wireless Modem Operating in the 2.4 GHz ISM band, the P2400 provides an international, economical solution with design flexibility and features.
Reference: DWM25032102
High power 1W, long-distance transmission, frequency range 410-480mhz, Microhard P400-C1S core module manufacturer's nominal distance is 100 kilometers.
Reference: DWM25032101
The Pico Series P400-C1S works at 410-480MHz frequency range, 1W frequency hopping, with encryption function, up to 100 kilometers in the air up to 345Kbps, and UART serial port 9600bps-230Kbps for the ultimate solution.
Reference: DWM25031701
The ThinkNode-M1 uses nRF52840 as the main processor Combined with the SX1262 wireless chip which is perfectly compatible with the Meshtastic official App to configure and manage device parameters, message communication, map and location sharing, network status monitoring, data recording and exporting, custom settings, etc.
Reference: DWM25031403
The LR1262 Development Board uses RP2040 as the main controller and LR1262 module users combined with the sensor modules have UI Ax2/Dx2/IICx1/UARTx1 that can quickly build a Lora node.
Reference: DWM23080403
The WisBlock Environment Sensor Kit is a comprehensive IoT kit that includes sensors for monitoring various environmental conditions. It features sensors for temperature, humidity, pressure, UV, CO2, Particulate Matter, VOC, and IAQ. Additionally, it supports different connectivity options like LoRaWAN, BLE, LTE-M, and NB-IoT.
Reference: DWM22091601
SR-FRS-4W (VHF:136MHz-174MHz and UHF: 400MHz-470MHz) is a low cost but high-performance integrated walkie talkie module max power output is 4W. With built-in high performance micro controller, narrow band Rf transceiver.
Reference: DWM23092602
The EM120H Industrial Waterproof Universal Voltage 30W Emergency light combined with the driver and the HIGHBAY LED LIGHT with Self Test mode.
Reference: DWM25011301
DS20L LoRaWAN smart distance detector works with a standard LoRaWAN gateway which measures a range between 3cm ~ 200cm targets the applications such as smart cities, and building automation.
Reference: DWM24070402
3xER14505 + SPC1550 3.6V Li-Soci2 8100mAh Uncharged Pack Battery for IOT device with a Spc1550 super pulse capacitor.
Reference: DWM24062701
RYLR998 with UART Interface can work at 868/915 MHz LoRa® Antenna Transceiver Module which provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
Reference: DWM23080608
The LoRaWAN Smart Home Office Security Kit includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM25022101
The DDS75-NB is an NB-IoT Distance Detection Sensor that uses BC660K-GL that detect the distance between the measured object and the sensor and sends the IoT platform via the NB-IoT network.
Reference: DWM23072504
The E72-2G4M20S1E is a multi-protocol 2.4GHz SMD wireless SoC module independently developed by Ebyte based on TI's CC2652P. The transmit power is 20dBm. It integrates an ARM microcontroller and high-performance wireless transceiver.
Reference: DWM23080301
BG95-M3 DIP40CORE-A KIT is ll function pins are drawn out, convenient for customers to integrate into the product.
Reference: DWM25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes which are based on DS18B20 convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM21072702
The LSN50V2-S31B is LoRaWAN Temperature & Humidity Sensor node be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: DWM23082401
The 315MHz gold plated spring antenna, is designed specially for 315MHz wireless communication. It has good VSWR, Compact dimensions, easy installation, stable performance, with good anti-vibration and anti-aging ability.
Reference: DWM23082201
The 1575.42 MHz GPS passive antenna designed for GPSL1 frequency bands and Glonass frequency bands. It can be widely used in car navigation, positioning tracking, security equipment, driving recorder and other occasions.
Reference: DWM22071801
The LSN50v2-D22 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM22102001
The LHT65N-NE117 has an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.
Reference: DWM23100603
The EM303 range is self-contained LED emergency spot light round type which is with Manual Test mode. It is designed with integrated driver, battery as completed set.
Reference: DWM23070102
D23-LB is a LoRaWAN Temperature Sensor with 3 x DS18B20 supports BLE configure and wireless OTA update.
Reference: DWM22122301
The BCN02 is a Bluetooth BLE iBeacon designed for indoor positioning solution. BCN02 is base on Diglog IC and support Bluetooth 5.1 protocol. BCN02 is low power consumption and with 1200mAh battery. With a 500ms broadcast interval, BCN02 can works for 4～5 years.
Reference: DWM24081201
PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. PB01 transfers the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.
Reference: DWM22092801
WSS-01 RS485 Rain Gauge is a weather monitor instrument to monitor rainfall.
Reference: DWM25031002
The LR1302-PI HAT is a Raspberry Pi expansion board that connects the SX1302-based LR1302 LoRaWAN gateway module to a Raspberry Pi Support Raspberry Pi 5/Support Raspberry Pi 4 B / Support Raspberry Pi 3 A+/B/B+ / Support Raspberry Pi 2 B / Support Raspberry Pi A+/B+.
Reference: DWM22082507
The LDDS45 is a LoRaWAN Distance Detection Sensor which is usedultrasonic sensing technology for distance measurement for Internet of Things solution.
Reference: DWM23072206
The MDS120-LB supports BLE configure and wireless OTA updateis more reliable for condensation / dusty environment to detect the distance between sensor and different objects.
Reference: DWM24090202
The PS-LS-D sensors are powered by solar power + li-on battery with a Differential Pressure Sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: DWM23080503
Outdoor GPS GNSS Location Tracker Kit includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM22082506
The LDDS04 is a LoRaWAN 4-Channels Distance Sensor for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM22091402
Dragino NDS01 is a NB-IOT Door Sensor for Internet of Things solution. It is used to detect the open/close event for door and uplink the event to IoT server via NB-IoT network.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Reference: DWM22082508
Ultrasonic Sensors A01A-15,A02-15,A13-15,A16-15 for LDDS04 LoRaWAN 4 channels sensor node.
Reference: DWM24071504
Outdoor waterproof whip antenna for Sub-1G ISM, NB,2.4G Bluetooth, WiFi, GSM, LTE 4G wireless module with extension cable IPEX.
Reference: DWM23021005
The LMDS120 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
Reference: DWM18101201
The OLG02 is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM18121802
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
Reference: DWM15090901
DWM-2WD Smart Car Kit is an kit base on the Arduino UNO with Bluetooth Control.
Reference: DWM17103102
LoRa Antenna-868MHz /915MHz 6dBi Out Door Waterproof Omni Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM18121803
DWM-51WS3 is high precision meteorological measurement module, which support to measure wind direction, wind speed, rainfall, temperature, humidity, pressure measurement mode, secondary development output with APRS data.
Reference: DWM15092501
HI-Link HLK-SW16 16 Channel Android/Smart Phone CWiFi Relay /WiFi Relay Module with P2P Function.
Reference: DWM17103101
LoRa Antenna-433MHz /470MHz 6dBi Out Door Waterproof Omni Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM16092102
3DTouch features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on.
Reference: DWM181011101
LoRa Antenna-470MHz 6dBi Out Door Waterproof Omni Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM21031502
The DWM-AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM23090801
The AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM17122901
LoRa Antenna-433MHz/ 868MHz/ 915MHz Out Door Waterproof Omni Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM16121001
DWM-LoRa1278 /LoRa1276 DK Board is for RFM98W,RFM96W and RFM95W module development and demostration and transmisstion distance test.
Reference: DWM20030404
The DWM-32u4 with LoRa RFM95 IOT Board consists of the mega24u and the wireless transport module RFM95 is used in remote control, telemetry, remote communication equipment, robot control, wireless communications.
Reference: DWM18120403
Brand: Semtech
RYLR896 868MHz, 915MHz high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
We are working on knowledge management, Organization Management, and Customer value management. we recruit the best engineers as a team to focus on one critical solution in a specifical application area.we will focus on the wireless design, wireless application, IOT solution and of the end nodes of the big data, ext.
icon
For all order over $950.00
icon
14 days for return
icon
Always feedback customer 24/7
icon
Safe shopping guarantee
