Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
LSE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture supports BLE configure and wireless OTA update It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
The Dragino SE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in SE01-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
SE01-LB supports BLE configure and wireless OTA update, which make user easy to use.
SE01-LB is powered by an 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each SE01-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
LoRaWAN 1.0.3 Class A
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Ultra-low power consumption
Monitor Soil Moisture
Monitor Soil Temperature
Monitor Soil Conductivity
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
AT Commands to change parameters
Downlink to change configure
IP66 Waterproof Enclosure
8500mAh Battery for long term use
Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Range: 0-100.00 V/V %
Resolution: 0.01 V/V %
Accuracy: ±3% (0-53%)V/V %, ±5% (>53%) V/V %
Measure Method: FDR , with temperature &EC compensate
Range: -40.00℃～85.00℃
Resolution: 0.01℃
Accuracy: -10℃～50℃:<0.3℃ ,All other: <0.6℃
Measure Method: RTD, and calibrate
Range: 0-20000 uS/cm(25℃)(0-20.0EC)
Resolution: 1 uS/cm
Accuracy: 2%FS
Measure Method: Conductivity , with temperature compensate
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuously current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Smart Agriculture
1 X SE01-LB Soil Moisture & EC Sensor
Package:
Size: 195 x 125 x 55 mm
Weight: 420g
XXX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
Reference: DWM21051603
The LSNPK01 is a LoRaWAN Soil NPK Sensor for IoT of Agriculturebase. detects soil's Nitrogen, Phosphorus, and Potassium use TDR method, and uploads these values via wireless to LoRaWAN IoT Server.
Reference: DWM21051604
The LLMS01 LoRaWAN Leaf Moisture Sensor for IoT of Agriculture it is designed to measure the leaf moisture and temperature to analyze the leaf status such as : watering, moisturizing, dew, frozen.
Reference: DWM21051605
The LSPH01 LoRaWAN Soil pH Senso for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level IP68 waterproof.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM18120402
Brand: Semtech
DWM-1278S 433MHz /470MHz sx1278 LoRa transceiver RF module compatible with RFM98W feature the LoRaTM long range module build by the semtech SX1278 chipset with the application for ARM meters.
Reference: DWM22091403
ES-261520 3.6V 8500mAh Li/ SOCI2 Battery for Dragino IOT sensor nodes like the LSN50-V2, LSN50v2-D20, LDDS75, LSE01,20, LSN50-V2-S31 ext.
Reference: DWM23021003
The MDS200-NB is an NB-IoT Microwave Radar distance sensor. It uses a 24GHz Microwave to detect the distance between the sensor and different objects. It can sense the correct distance even if there is water or thick dust on the sensor.
Reference: DWM25022201
The DDS45-LS solar-powered LoRaWAN Distance Detection Sensor can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection, intelligent trash can management system, etc.
Reference: DWM24011401
The CPL03-NB is a NB-IoT Contact Sensor for the Internet of Things solution. it detects dry contact status, open time, open counts, and then upload to IoT server via NB-IoT network supports BLE configure and OTA update.
Reference: DWM23072306
The DS03A-LB is an Open/Close LoRaWAN Door Sensor that supports BLE configure and wireless OTA update. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
Reference: DWM19090403
The PG1301 build by SX1301 and SX1257 which is The 10 channels - LoRaWAN GPS Concentrator for Raspberry Pi can connect to 5000 nodes.
Reference: DWM22051404
LoRaWAN Helium HNT miner Indoor networking antenna available with 433MHz,868MHz and 915MHz.
Reference: DWM20033101
ER18505+SPC1520 Super Pulse Cap 4000mAh Li/SOCI2 unchargable battery for LSN50 Sensor nodes.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM25022601
The MDS200-LS is a solar-powered LoRaWAN Microwave Radar distance sensor. It uses a 24Ghz Microwave to detect the distance between the sensor and different objects. Microwave Radars supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM23101802
The RS485-LB is an RS-485 / UART to LoRaWAN Converter for Internet of Things solutions. The user can connect an RS485 or UART sensor to the RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload it via the LoRaWAN network to the IoT server.
Reference: DWM22071801
The LSN50v2-D22 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM25021901
The TC01/TC11-LB is a LoRaWAN Thermocouple Converter that measures the industrial environment temperature and then uploads it to the IoT server via the LoRaWAN network.
Reference: DWM23072204
The DDS45-LB is a LoRaWAN Distance Detection Sensor supports BLE configure and wireless OTA update which is usedultrasonic sensing technology for distance measurement for Internet of Things solution.
LSE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture supports BLE configure and wireless OTA update It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
