Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
UV254-LB is a LoRaWAN UVC Radiation Sensor is designed for detecting the intensity of ultraviolet lamps UVC is harmful to human health and to know UVC lamp is operate efficacy and make sure it won't work in unexpected time.
The Dragino UV254-LB is a LoRaWAN UVC Radiation Sensor for Internet of Things solution. UV254-LB is an indoor UVC sensor specially designed for detecting the intensity of ultraviolet lamps. UV254-LB will convert the UVC Intensity to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
UVC is harmful to human health, and UVC lamp will lose efficacy after long time use. With UV254-LB, administrator can know if the UVC lamp is operate efficacy and make sure it won't work in unexpected time.
The LoRa wireless technology used in UV254-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
UV254-LB supports BLE configure and wireless OTA update which make user easy to use.
UV254-LB is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each UV254-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
LoRaWAN 1.0.3 Class A
Ultra-low power consumption
Detect UVC lamp working status
Detect UVC lamp working efficiency
Peak response spectrum 254nm
Monitor Battery Level
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
Uplink on periodically
Downlink to change configure
8500mAh Battery for long term use
Supply Voltage: 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Measuring range 0～5mw/cm ²
Response spectrum range 254nm±5nm
Peak response spectrum 254nm
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz,Band 2 (LF): 410 ~ 528 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuously current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
UV254-LB UVC Radiation Sensor x 1
Size: 195 x 125 x 55 mm
Weight: 420g
Part Number: UV254-LB-XX
XX: The default frequency band
AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band
EU433: LoRaWAN EU433 band
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
CN470: LoRaWAN CN470 band
Reference: DWM22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM23050801
SN50V3-LB is the 3rd generation of the LSN50 series generic sensor node built-in BLE support OTA upgrade private LoRa protocol for easy maintenance.
Reference: DWM23070202
S31B-LB is a LoRaWAN Temperature and Humidity Sensor with a SHT31 sensor probe based SN50v3-LB or LSN50V3 supports BLE configure and wireless OTA update.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM23021004
The SDI-12-LB is a SDI-12 protocol to LoRaWAN Converter designed for SDI-12 sensor Smart Agriculture solution.
Reference: DWM22072103
LA66 is a ready-to-use module that includesLoRaWAN v1.0.4 protocol and also supports open-source peer-to-peer LoRa Protocol for the none-LoRaWAN application.
Reference: DWM22100801
AN-304C LoRaWAN PIR motion sensor node is a wireless infrared alarm which is based on passive infrared technology to detect a motion or occupancy.
Reference: DWM22122901
The LWL03A is a LoRaWAN Water Leak Controller use a Water Leak Cable on the ground to detect water leakage. The water leak cable is sensitivity, when there is water over the leak cable.
Reference: DWM19121101
ATmega328P LoRa Radio Node is based on SX1276/SX1278 which use the Arduino pro mini 8Mhz 3.3V bootloader, usage same as the Arduino pro mini.
Reference: DWM23122502
TS01-NB is an outdoor NB-IOT Tilting Sensor which is specially designed for detecting the angle of trees, buildings or large scale equipment measures pitch and roll angle and converts to NB-IoT wireless data and sends to IoT platform via NB-IoT network.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Reference: DWM18122002
Free Shipping LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM23072204
The DDS45-LB is a LoRaWAN Distance Detection Sensor supports BLE configure and wireless OTA update which is usedultrasonic sensing technology for distance measurement for Internet of Things solution.
Reference: DWM17111202
LoRaST 433MHz /470MHz /868MHz /915MHz Open Source Long Range Wireless LoRa Transceiver is a small wireless transceiver module offers a very compelling mix of long range, low power consumption and secure data transmission.
Reference: DWM17112001
EC25 Mini PCIe IOT LoRa Gateway 4G Cellular Module is Quectel EC25 which is used in the LG308 and DLOS8 IOT LoRa Gateway as bridge of 4G cellular wireless network.
Reference: DWM22071801
The LSN50v2-D22 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM17110902
L80-R is an ultra compact GPS POT (Patch on Top) module with an embedded 15.0mm × 15.0mm × 4.0mm patch antenna.
Reference: DWM18022201
Dragino LoRa IoT Development Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology.it will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
Reference: DWM24081201
PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. PB01 transfers the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.
UV254-LB is a LoRaWAN UVC Radiation Sensor is designed for detecting the intensity of ultraviolet lamps UVC is harmful to human health and to know UVC lamp is operate efficacy and make sure it won't work in unexpected time.
