Reference: DWM19070804

RAK7258 8 channels OpenWRT OS LoRa Gateway with LoRa /WIFI module

RAK7258 Micro Gateway is a full 8-channel LoRa Gateway with built-in Ethernet connectivity for a straightforward setup. Additionally, there is an onboard Wi-Fi setup that allows it to be easily configured via the default Wi-Fi AP mode.

Reference: DWM19022801

DWM-RAK2245 Pi HAT based SX1301 8 Channels LoRaWAN gateway with GPS module

DWM-RAK2245 Pi HAT based SX1301 8 Channels LoRaWAN gateway with GPS module is a LoRaWAN gateway  Module based on SX1301,Pre-install LoRa gateway OS.

Reference: DWM19091702

RAK2247 LoRa Gateway mPCIE Board-RAK833 Concentrator Module

RAK2247 LoRa Gateway mPCIE Board-RAK833 Concentrator Module is the evolution of RAK833 is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.

Reference: DWM18050301

DWM-RAK813 LoRa and Bluetooth Module nRF52832 and LoRa SX1276 core chip

DWM-RAK813 LoRa and Bluetooth Module nRF52832 and LoRa SX1276 core chip which is a combination of the BLE and LoRa of the relay node module.

Reference: DWM18011702

RAK811 Development Kit WisDuo LoRa Module

RAK811 Development Kit WisDuo LoRa Module is a combination of the RAK811 chipset and the RAK811 Breakout Board.

Reference: DWM20053103

Brand: Semtech

DWM-RAK4600 LPWAN Evaluation Board

The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.

Reference: DWM20053102

Brand: Semtech

DWM-RAK4600 Breakout Module

DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.

Reference: DWM20053104

Brand: Semtech

DWM-RAK4260 Breakout Module

DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing. 

Reference: DWM20053101

Brand: Semtech

DWM-RAK4200 LoRa module integrates SX1276 and STM32L071 MCU ultra-low power consumption

DWM-RAK4200 LPWAN Module includes an STM32L071 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 1.5uA in sleep mode and high LoRa® output power up to 19dBm max in work mode.

Reference: DWM22052403

RAK8213 BG96 NB-IOT Mini PCIe Cellular Module

RAK8213 is a multi-band LTE Cat M1/Cat NB1/EGPRS module based on the Quectel BG96 with a standard PCI Express® form factor (Mini PCIe). It offers a maximum data rate of 375Kbps downlink and 375Kbps uplink.

Reference: DWM22052402

RAK2011 BG96 NB-IOT Cellular Arduino Shield board

RAK2011 is Arduino shield board powered by the Quectel BG96 modem chipset. It supports 2G/EGPRS, 4G/LTE Cat-M1 (eMTC), Cat-NB1 (Nb-IoT), as well as GPS.

Reference: DWM22062302

LoRaWAN Weather Monitor Development kit

This Kit consists of a Sensor Node to measures air temperature, air humidity, barometric pressure, and environment luminosity values. Transmitting data periodically to a LoRaWan® server.

Reference: DWM22062301

LoRaWAN GNSS GPS Tracker development kit with Solar Panel

The LoRaWAN GNSS GPS Tracker is with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.

Reference: DWM19070803

RAK7258 8 channels OpenWRT OS LoRa Gateway with LoRa /4G /WIFI module

RAK7258 Micro Gateway is a full 8-channel LoRa Gateway with built-in Ethernet connectivity for a straightforward setup. Additionally, there is an onboard Wi-Fi setup that allows it to be easily configured via the default Wi-Fi AP mode.

Reference: DWM20092101

DWM-RAK7240 8 channels LoRa Gateway with LoRa /4G /WIFI /GPS

DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .

Reference: DWM18050801

RAK811 WisNode-LoRa Arduino shield board

RAK811 WisNode LoRa Module development board is compatible with Arduino Development Board. It can also be used as an extension board development with Arduino.