Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RAK7240V2 is an IP65 Outdoor LoRaWAN Gateway It is based on the latest SX1303 LoRa core that supports multi-backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Description
WisGate Edge Prime Version 2 is the newest outdoor LoRaWAN gateway. It is based on the latest SX1303 LoRa core, providing better sensitivity and improved performance. The gateway is available in 8 or 16-channel versions to help you utilize the maximum of the available LoRaWAN channels in your region.
The gateway supports multi-backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
There are two options regarding the supported power supply: One supports only PoE power, and the other is equipped with a dedicated port for different power options. It supports DC power input (9~24VDC) and our Battery Plus. When used with RAK Battery Plus and Solar kit the information about the battery use and capacity, charging states, and performance information is available in the WisGateOS2 WebUI and in WisDM. You can add the RAK Battery Plus and solar kit from the Check to Include option.
The device comes with the newest WisGateOS 2 which provides all the existing features but adds a new design, many options, and tooltips. It comes with extension add-ons – an option to add and manage additional features catering to your needs.
The gateway can be managed remotely via the WisDM platform.
It is suited for any use case scenario, be it rapid deployment or customization regarding UI and functionality.
The flat surface of the full metal enclosure allows your logo to be added for brand customization and recognition.
Supported LoRaWAN Network Servers: Chirp Stack v3/v4, TTN/TTS, AWS IoT Core for LoRaWAN, AWS IoT core integration, Actility LNS with Basics Station (8-channel only).
IP65 industrial-grade enclosure with cable glands
PoE (802.3af) + Surge Protection
Dual LoRa Concentrators for up to 16 channels
Backhaul: Wi-Fi, LTE (for the 8-channel version) and Ethernet
Supports DC 9~24V, RAK Battery Plus (optional)
External antennas for Wi-Fi, GPS, and LTE, External antenna for LoRa
Dying gasp
WisGateOS 2
Extension add-ons
Built-in Network Server
LoRaWAN 1.0.3 (LoRaWAN 1.0.4 for the Built-in server is coming soon)
Basics Station and Packet forwarder
LoRa Frame filtering (node whitelisting)
MQTT v3.1 Bridging with TLS encryption (compatible with ChirpStack LNS)
Buffering of LoRa frames in Packet Forwarder mode in case of NS outage (no data loss)
Fine timestamping (optional)
| EG95-E for EMEA Region | LTE FDD: B1/B3/B7/B8/B20/B28A WCDMA: B1/B8 GSM/EDGE: B3/B8 |
| EG95-NA for North America Region | LTE FDD: B2/B4/B5/B12/B13 WCDMA: B2/B4/B5 Optional supports other PCIE LTE module for Global Region |
|
EC25-J EC25-AU |
Japan, DOCOMO/SoftBank/ KDDI Latin America, New Zeland, Taiwan |
Note: The default shipping is with the 8-channel version If you need 16 16-channel versions and also the Custom logo version Pls send an inquiry to Sales@dwmzone.com.
1x 8-channel device
1pc 3dBi Fiberglass Antenna
1x GPS Antenna
1x 2.4G Wi-Fi Antenna
1x PoE Injector
1x Mounting Kit
1x Manual
1x 8-channel device with LTE module
1pc 3dBi Fiberglass Antenna
2x LTE Antenna
1x GPS Antenna
1x 2.4G Wi-Fi Antenna
1x PoE Injector
1x Mounting Kit
1x Manual
Reference: DWM22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22051801
The LHT65N is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM22122903
The LoRaWAN Sensor Hub weather station is equipped with high-precision sensors that measure wind speed and direction, atmospheric pressure, humidity, and temperature. It is suitable for Smart Cities, Smart Farms, Smart Agricultural, environmental monitoring, and other use cases.
Reference: DWM18042701
LoRa Antenna-433MHz /470MHz /868MHz /915MHz 8dBi Glass Fiber Antenna with N Female Connector. Out Door Waterproof Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM23010803
RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM22082901
RAK Battery Plus is specially developed for the WisGate Edge Pro gateways. It will allow reliable outdoor deployment of the gateway in remote off-grid scenarios where the power is unreliable or inaccessible which is incorporating a solar charging system and status monitoring.
Reference: DWM23080604
IoT Starter Kit with RAK5860 NB-IOT module Quectel BG77 including LoRaWAN, BLE, LTE-M/NB-IoT, and a range of different modules, including temperature/humidity, accelerometer, barometer, ambient light, and GPS. It also supports multiple outputs such as a buzzer, RGB LED, and I2C OLED.
Reference: DWM23080501
Outdoor GPS GNSS Location Tracker Kit with RAK5860 NB-IOT module Quectel BG77 includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM23080605
IoT Starter Kit with RAK13101 GSM module Quectel MC20CE including LoRaWAN, BLE, LTE-M/NB-IoT, and a range of different modules, including temperature/humidity, accelerometer, barometer, ambient light, and GPS. It also supports multiple outputs such as a buzzer, RGB LED, and I2C OLED.
Reference: DWM23080609
The IOT Smart Industry 4.0 Kit with RAK5860 NB-IOT module Quectel BG77 includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
Reference: DWM23051901
RAK3272S Breakout Board is specifically designed to allow easy access to the RAK3172 low power long range LoRawan module the board in order to simplify development and testing.
Reference: DWM18011801
DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.
Reference: DWM23072803
Indoor Location Tracker Kit with RAK5860 NB-IOT module Quectel BG77 with LoRaWAN, NB-IoT The Kit is providing all components to build a UWB based indoor tracking and location system It includes motion sensors and four UWB modules.
Reference: DWM24012601
The Meshtastic starter Kit includes a WisBlock Base board and the RAK4631 WisBlock Core module, already flashed with the Meshtastic firmware. Power the boards up and start sending messages immediately.
Reference: DWM23080503
Outdoor GPS GNSS Location Tracker Kit includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM22082504
The RAK4630 module delivers a powerful Nordic nRF52840 MCU with BLE 5.0 paired to the latest LoRa® transceivers from Semtech, the SX126x series.
Reference: DWM23080505
Light and Color Kit with RAK13101 GSM module Quectel MC20CE includes RGB, visible, and UV light sensors, as well as LED bar and RGB modules, providing a versatile platform for measuring and controlling light and color in a wide range of applications.
RAK7240V2 is an IP65 Outdoor LoRaWAN Gateway It is based on the latest SX1303 LoRa core that supports multi-backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
