Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The IOT Movement Detection Kit with RAK5860 NB-IOT module Quectel BG77 this kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
The WisBlock Movement Detection Kit is a comprehensive and customizable IoT kit designed for motion detection applications. This kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor. These sensors provide accurate and reliable motion detection data, making them ideal for a variety of use cases.
Depending on the use case, this kit supports a variety of connectivity options, including LoRaWAN, BLE, LTE-M (optional), and NB-IoT (optional), enabling long-range and short-range communication. With this kit, you can easily create custom motion detection solutions for a range of applications, including building automation, security systems, and environmental monitoring.
Compatible with Arduino IDE
USB C interface for data, power, and battery charging
Supports Li-Ion batteries with built-in solar charging capability
Multiple communication protocols: LoRa/LoRaWAN, BLE, LTE-M (optional), and NB-IoT (optional)
Two WisBlock Core modules - RAK4631 LPWAN Module(opens new window)
One standard RAK19007 WisBlock Base Board (opens new window)with 4 sensor slots and 1 IO slot
One standard RAK19003 WisBlock Mini Base Board with 2 sensor slots
Two RAK12033 6-axis ACC Motion Sensor
Two RAK12025 Gyroscope
Two RAK12013 Radar Sensor
TwoRAK12017 IR Proximity Sensor
Two RAK12006 PIR Motion Sensor
Two RAK12007 Ultrasonic Sensor
Two RAK1904 ACC Motion Sensor
Two RAK1905 9DOF Motion Sensor
LoRaWAN supported bands: RU864, IN865, EU868, AU915, US915, KR920, and AS923
Cellular variant dependent on a country: two (2) RAK5860 (opens new window)with 5G LTE NB-IoT capability
GPS built-in on Cellular modules
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM22022501
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM22082903
RAK7289 WisGate Edge Pro is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM22123003
RAK9003 PoE Pi HAT can power the RPi 3B+ and RPi 4 directly through your gateway's Ethernet port. suitable for deployments utilizing cabled network connectivity.
Reference: DWM20053103
Brand: Semtech
The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.
Reference: DWM22122904
The LoRaWAN Pyranometer sensor measures solar radiation. It is suitable to be used to monitor solar activity in solar parks, solar-dependent systems, and others.
Reference: DWM24081401
RAK7391 IOT LoRaWAN Gateway Carrier Board with a RAK5146 LPWAN Concentrator module adapted Raspberry Pi CM4 is a great board to build your solution, whether a gateway, edge device, or a general-purpose computer!
Reference: DWM22122905
The LoRaWANenvironmental monitoring and moving detection solution includes a combination of the Temperature and Humidity Sensor and the 3-axis Acceleration Sensor inside the Sensor Probe.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM23051902
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
Reference: DWM23010802
RAK7431 is a Modbus RS485 to LoRaWAN® bridge designed for industrial applications. The device relays Modbus data using the LoRaWAN network as a means of wirelessly transmitting to and from the end devices.
Reference: DWM20053104
Brand: Semtech
DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.
Reference: DWM19022402
DWM-RAK7249 is The Enterprise DIY outdoor LoRaWan GATEWAY Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM22082602
The new A-fix Bracket Kit will help you easily install and optimally position your antennas for any use case scenario, to ensure the best coverage possible
Reference: DWM22082505
RAK3172 based on STM32WLE5CC chip is a low-power long-range transceiver module for LoRa and LoRaWAN applications.
Reference: DWM24060501
The RAK5148 Semtech SX1280 LPWAN 2.4 GHz Concentrator Module with a ZOE-M8Q GPS chip onboard allows for easy integration into existing routers or other network equipment with LPWAN gateway capabilities.
Reference: DWM20053101
Brand: Semtech
DWM-RAK4200 LPWAN Module includes an STM32L071 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 1.5uA in sleep mode and high LoRa® output power up to 19dBm max in work mode.
Reference: DWM23080509
The LoRaWAN IOT Movement Detection kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
Reference: DWM22082901
RAK Battery Plus is specially developed for the WisGate Edge Pro gateways. It will allow reliable outdoor deployment of the gateway in remote off-grid scenarios where the power is unreliable or inaccessible which is incorporating a solar charging system and status monitoring.
The IOT Movement Detection Kit with RAK5860 NB-IOT module Quectel BG77 this kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
