Reference: DWM20060102

Brand: Semtech

DWM-RAK4200 Breakout Module

DWM-RAK4200 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.it's utilized is of an Xbee form factor.

Reference: DWM23010803

RAK7432 convert 4-20mA signal from analog to digital lorawan bridge

RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.

Reference: DWM20053001

Brand: Semtech

DWM-RAK4600 LoRa module integrates SX1276 and nRF52832 MCU support LoRaWAN and BLE 5.0

DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.

Reference: DWM20060101

Brand: Semtech

DWM-RAK4260 LPWAN Evaluation Board

DWM-RAK4260 LPWAN Evaluation Board is a WisBlock product that consists of DWM-RAK4260 (DWM-RAK4260 LPWAN Module + Breakout board) and the RAK5005 WisBase

Reference: DWM23080506

RAK LoRaWAN Light and Color Kit

Light and Color Kit includes RGB, visible, and UV light sensors, as well as LED bar and RGB modules, providing a versatile platform for measuring and controlling light and color in a wide range of applications.

Reference: DWM22121301

RAK7248 Raspberry Pi 4 Based LoRaWAN Gateway WisGate Developer

RAK7248 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4H/D4H+/D4HP RAK7248/RAK7248P/RAK7248C.

Reference: DWM22122905

LoRaWAN Environmental Monitoring + Movement Detection

The LoRaWANenvironmental monitoring and moving detection solution includes a combination of the Temperature and Humidity Sensor and the 3-axis Acceleration Sensor inside the Sensor Probe.

Reference: DWM23010802

RAK7431 Modbus RS485 to LoRaWAN bridge Serial

RAK7431 is a Modbus RS485 to LoRaWAN® bridge designed for industrial applications. The device relays Modbus data using the LoRaWAN network as a means of wirelessly transmitting to and from the end devices.

Reference: DWM23010901

RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway

RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.

Reference: DWM22082501

RAK5010 BG96 NRF52840 GPS BLE and NB-IOT Tracker with sensors

RAK5010 is a tracker with integrated LTE CAT M1 & NB1, GPS, BLE, and sensors. It is built on the Quectel BG96 LTE CAT M1 & NB1 module, which has an integrated GPS receiver. The MCU running the board is a Nordic nRF52840 controller.

Reference: DWM18011801

DWM-RAK831 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module

DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.

Reference: DWM23080609

IOT Smart Industry 4.0 Kit with RAK5860 NB-IOT module Quectel BG77

The IOT Smart Industry 4.0 Kit with RAK5860 NB-IOT module Quectel BG77 includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.

Reference: DWM22122904

LoRaWAN Solar Radiation Sensor Solar Power Monitoring solar activity

The LoRaWAN Pyranometer sensor measures solar radiation. It is suitable to be used to monitor solar activity in solar parks, solar-dependent systems, and others.

Reference: DWM23070301

Field Tester For LoRaWAN

LoRaWAN Field Tester which helps to LoRaWAN network coverage it's easy to investigate whether the required area of sensor nodes is covered by gateways. 

Reference: DWM23080608

LoRaWAN Smart Home Office Security Kit

The LoRaWAN Smart Home Office Security Kit  includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.

Reference: DWM22101701

DWM-M702 seven-in-one Air Quality Sensor module with RS485/UART output

DWM-M702 seven-in-one sensor module is a cost-effective digital serial port output sensor module, which adopts 485/UART output mode and integrates CO2, HCHO, TVOC,PM2.5,PM10, temperature and humidity.