Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RAK2013 4G/ LTE Nb-IoT is a Raspberry Pi 4B compatible cellular communication module It supports the following standards: 4G/LTE, Nb-IoT, CAT-M/CAT1/CAT4 Cellular.
Cellular Pi Hat (RAK2013) is a Raspberry Pi 4B compatible cellular communication module. It is aimed at providing a Low Power Wide Area Network (LPWAN) connectivity to IoT devices. It has several configuration options of its onboard radio including the Quectel BG96/EG95. It supports the following standards: 4G/LTE, Nb-IoT, CATM/CAT1/CAT4 Cellular. Because of its integrated audio amp and codec, it is suitable for Voice over LTE (VoLTE) in carrier network scenarios where HD calls are a requirement. The necessary connectors for each type of operation are conveniently placed on one side of the board inorder to provide easy access.
It has a built-in header that adheres to the mikro Bus standard. Because of its wide range of supported sensors, it is suitable for applications such as environmental monitoring, presence sensing, etc., that require cellular connectivity.
NB-IoT
LTE CAT-M1
LTE CAT1/CAT4
Support for both nano and eSIM
Integrated audio amp and codec for full VoIP support
Full compatibility with Raspberry Pi 3B+
Integrated mikroBUS header
GPS optional support (BG96 only)
Built-in EEPROM for storing of auto-configuration options
To know the difference between EG95-E and EG95-NA, please refer to the following table:
| Frequency | EG95-E | EG95-NA |
|---|---|---|
| LTE FDD | B1/B3/B7/B8/B20/B28A | B2/B4/B5/B12/B13 |
| WCDMA | B1/B8 | B2/B4/B5 |
| GSM/EDGE | B3/B8 | |
| Region | EMEA | North America |
| Carrier Certification* | Verizon/ AT&T/ T-Mobile/ Telus/ U.S. Cellular/ Rogers | |
| Regulatory Certification* | GCF/ CE/ RCM/ FAC | GCF/ FCC/ PTCRB/ IC |
| Other Certifications* | WHQL | WHQL |
Board Dimensions: 65mm x 56mm x 19.5 mm
Board Weight: Approximately 0.99 oz (±0.1oz)
Package Dimensions: 150mm x 90mm x 40mm
1pc RAK2013 board
1pc LTE Antenna
1pc GPS Antenna (for BG96 only)
1pc Micro USB cable
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM22052401
RAK2247 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2247 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM22090803
The Raspberry Pi 3 Model B is based on the 64-bit quad-core Broadcom BCM2837 ARMv8 core with a processor clock of 1.2 GHz and is therefore up to ten times more powerful than a first-generation Raspberry Pi with wireless LAN and Bluetooth connectivity.
Reference: DWM22123001
The Raspberry Pi 4 Model B is the best single-board computer to develop your IoT project, and start your first gateway for NB-IoT/Cat-M and LoRaWAN with the RAK Pi HAT.
Reference: DWM23080407
RAK Industrial IO and Communication Kit with RAK5860 NB-IOT module Quectel BG77 which is including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control.
Reference: DWM20053102
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM24060501
The RAK5148 Semtech SX1280 LPWAN 2.4 GHz Concentrator Module with a ZOE-M8Q GPS chip onboard allows for easy integration into existing routers or other network equipment with LPWAN gateway capabilities.
Reference: DWM23070301
LoRaWAN Field Tester which helps to LoRaWAN network coverage it's easy to investigate whether the required area of sensor nodes is covered by gateways.
Reference: DWM23080401
The RAK Agriculture Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
Reference: DWM23080102
The RAK Agriculture Kit with RAK13101 GSM module Quectel MC20CE with LoRaWAN, GSM The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
Reference: DWM23080101
The RAK Agriculture Kit with RAK5860 NB-IOT module Quectel BG77 with LoRaWAN, NB-IoT The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
Reference: DWM18042701
LoRa Antenna-433MHz /470MHz /868MHz /915MHz 8dBi Glass Fiber Antenna with N Female Connector. Out Door Waterproof Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM22092602
This affordable kit features a selection of 13 different WisBlock IO and WisBlock Sensor modules.The WisBlock Kit is a complete set of all available WisBlock modules.
Reference: DWM23080504
Light and Color Kit with RAK5860 NB-IOT module Quectel BG77 ncludes RGB, visible, and UV light sensors, as well as LED bar and RGB modules, providing a versatile platform for measuring and controlling light and color in a wide range of applications.
Reference: DWM23080402
Indoor Location Tracker Kit with LoRaWAN, The Kit is providing all components to build a UWB based indoor tracking and location system .It includes motion sensors and four UWB modules.
Reference: DWM23080601
IOT Smart Biometric Monitoring Kit with RAK5860 NB-IOT module Quectel BG77 includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes
Reference: DWM23100501
LoRaWAN GPS Tracker kit with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM23072801
RAK2270 is a sleek sticker tracker for LoRaWAN® designed like a label, making it easy to attach to any product. It offers real-time location tracking through the Helium network server's advanced features.
Reference: DWM23100902
RAK7289V2 WisGate Edge Pro Version 2 is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
RAK2013 4G/ LTE Nb-IoT is a Raspberry Pi 4B compatible cellular communication module It supports the following standards: 4G/LTE, Nb-IoT, CAT-M/CAT1/CAT4 Cellular.
