Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The RAK4630 module delivers a powerful Nordic nRF52840 MCU with BLE 5.0 paired to the latest LoRa® transceivers from Semtech, the SX126x series.
The RAK4630 module delivers a powerful Nordic nRF52840 MCU with BLE 5.0 paired to the latest LoRa® transceivers from Semtech, the SX126x series.
The module also includes a temperature-controlled crystal oscillator (TXCO) for correct operation across a wide range of temperature and bandwidth requirements as well as multiple communication interfaces including UARTs, I2C, SPI, ADC, USB and GPIOs.
The module complies with Class A, ClassB, Class C of LoRaWAN 1.0.3 specifications, and it also supports LoRa Point to Point (P2P) communications. The module is suitable for various applications that require long-range data acquisition and low power consumption, The two RF communication characteristic of the module (Lora® + BLE) makes it suitable for a variety of applications in the IoT field, such as home automation, sensor networks, building automation, and IoT network applications.
You can configure the mode and operation of the RAK4630 module using RAK4630 AT Commands via a UART interface or over BLE. Also, it offers low-power features that are very suitable for battery-powered applications.
The AT command firmware of the RAK4630 is based on our RUI3. You can as well write your own firmware using our powerful RUI3 API.You can directly interface sensors and other external peripherals to it without needing an additional MCU. On top of that, RAK4630 can be interfaced to an external host MCU using AT commands via USB, UART, or BLE connection.
LoRaWan® 1.0.2 protocol stack (supports Class A & C)
Bluetooth Low Energy 5.0 protocol stack
Nordic nRF52840:
Ultra-low-power MCU
32-bit ARM® Cortex-M4F CPU
64MHz CPU clock
1 MB Flash, 256 KB RAM
Wide range of connections:
I2C, SPI, Analog inputs,
Digital inputs and outputs
Semtech SX1262:
Low power high range
LoRa® transceiver
Reference: DWM20022601
LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node with external antenna,It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.
Reference: DWM22022501
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM22082502
RAK5146 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1303 and SX126X for Listen Before Talk feature, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.
Reference: DWM22082503
RAK11300 is based on the Raspberry Pi RP2040 chip and SX1262 RF transceiver it's complies with Class A & C of LoRaWAN 1.0.2 specifications.
Reference: DWM23080403
The WisBlock Environment Sensor Kit is a comprehensive IoT kit that includes sensors for monitoring various environmental conditions. It features sensors for temperature, humidity, pressure, UV, CO2, Particulate Matter, VOC, and IAQ. Additionally, it supports different connectivity options like LoRaWAN, BLE, LTE-M, and NB-IoT.
Reference: DWM20053001
Brand: Semtech
The DWM-RAK4260 LPWAN Module is based on Microchip’s ATSAMR34J18B integrating a 32-bit ARM Cortex -M0+ MCU with a LoRa Transceive, provides a number of highly configurable peripherals (configurable as I2C/SPI/UART interfaces).
Reference: DWM22101701
DWM-M702 seven-in-one sensor module is a cost-effective digital serial port output sensor module, which adopts 485/UART output mode and integrates CO2, HCHO, TVOC,PM2.5,PM10, temperature and humidity.
Reference: DWM23080602
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
Reference: DWM23010801
RAK2171 is RAK latest LoRaWAN GPS tracking device. It comes in a small form factor with rechargeable battery and tracking and configuration application, available for iOS and Android devices.
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM23080506
Light and Color Kit includes RGB, visible, and UV light sensors, as well as LED bar and RGB modules, providing a versatile platform for measuring and controlling light and color in a wide range of applications.
Reference: DWM19030101
DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT,RAK2013 Cellular Pi HAT.
Reference: DWM23072802
Indoor Location Tracker Kit with RAK13101 GSM module Quectel MC20CE with LoRaWAN, LTE-M The Kit is providing all components to build a UWB based indoor tracking and location system .It includes motion sensors and four UWB modules.
Reference: DWM23080502
Outdoor GPS GNSS Location Tracker Kit with RAK13101 GSM module Quectel MC20CE includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM23080503
Outdoor GPS GNSS Location Tracker Kit includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM21040701
DWM-RAK2287 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1302, the module comes with a ZOE-M8Q GPS chip, in order to provide GNSS functionality.
Reference: DWM23080501
Outdoor GPS GNSS Location Tracker Kit with RAK5860 NB-IOT module Quectel BG77 includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM22082501
RAK5010 is a tracker with integrated LTE CAT M1 & NB1, GPS, BLE, and sensors. It is built on the Quectel BG96 LTE CAT M1 & NB1 module, which has an integrated GPS receiver. The MCU running the board is a Nordic nRF52840 controller.
Reference: DWM20053104
Brand: Semtech
DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.
The RAK4630 module delivers a powerful Nordic nRF52840 MCU with BLE 5.0 paired to the latest LoRa® transceivers from Semtech, the SX126x series.
