The Enterprise Grade DIY outdoor Gateway is an ideal product for IoT commercial deployment. It contains the Main Board, Operator-grade waterproof enclosure, backup battery and mounting accessories. The hardware main board completely integrates the WIFI, 4G, GPS and PoE main supply with an integrated back-up battery. The firmware implements a fully featured LoRaWAN™ complinant network base station. The Gateway has a range of over 15Km line-of-sight and over 2Km in dense urban environments. The DIY Gateway brings more flexiblity for the developer to create an enterprise grade solution: our most important difference is our flexible development support structure, allowing for faster development and time to market. We offer both a ready to go firmware image for openWRT based platforms and an open SDK for integration into hardware to support the needs of each customer.
Enterprise grade network gateway with your own configuration.
LoRaWAN™ Stack Inside and integrate the Web UI for management.
Complete Hardware specification including LoRa concentrator, Cellular, GPS and WIFI.
Supports Power of Ethernet (PoE) IEEE 802.3af/at-Compliant Class 4, 48V.
Battery Backup sustains operation for 5 hours under typical conditions.
IP67 waterproof enclosure with cable gland.
||MT7628, DDR2RAM 128MB
||Frequency: 2.400-2.4835GHz(802.11b/g/n) ·
RX Sensitivity: -95dBm (Min),
TX Power: 20dBm (Max) ·
Operation Channels: 2.4GHz: 1-13
||SX1301 Mini PCIe card (connects maximum of two),
16 Channels (Optional: 8channels) ·
RX Sensitivity: -142dBm (Min),
TX Power: 27dBm (Max) ·
Frequency: EU433, CN470, EU868, US915
AS920, AS923, AU915, KR920, IN865
|LPWA IoT Protocol
||Cellular Variant for Europe
LTE FDD: B1/B3/B7/B8/B20/B28A
Cellular Variant for North America
LTE FDD: B2/B4/B5/B12/B13
Optional: Bluetooth 5, Zigbee
||PoE(IEEE 802.3af/at-Compliant), 42~57VDC
||5 N-Type connectors
||Approximately 111.11oz (3.15kg)
||220mm x 220mm x 104mm
|| -30˚C to 65 ˚C
||Pole or Wall mounting
Support class A, B & C
Supports Semtech LoRa packet forwarder Supports country code setup
Supports TX power setup
Supports data logger Supports statistics
Supports location setup
Supports server address & port setup
Supports WiFi AP mode
Supports LTE APN setup
Supports uplink backup
Supports DHCP Server/Client Supports router module NAT
Supports WEB Management Supports SSH2
Supports firmware update