- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DWM-RAK5205 LoRa Tracker built on SX1276 LoRaWAN modem with low power micro-controller STM32L1, integrated the GPS module is an open all source code products,allowing users to conveniently link to the LoRaWAN network.
DWM-RAK5205 LoRa Tracker built on SX1276 LoRaWAN modem with low power micro-controller STM32L1, integrated the GPS module is an open all source code products,allowing users to conveniently link to the LoRaWAN network.
The RAK5205 LoRa tracker board is built on SX1276 LoRaWAN modem with low power microcontroller STM32L1, integrated the GPS module. It is a feature-packed sensor board that provides various interfaces for featured applications development. This is the best sensor board available in the market, ideal as a quick prototyping tool for Internet-of-Things and LoRaWAN Network integration. It is perfect for IoT applications such as asset tracking, smart vehicle management and location-based services. Most importantly, application development environments such as the CooCox IDE and Keil are all supported, users can quickly develop own applications.
Compatible with 96Boards IoT Edition Specification.
With SX1276 LoRa long range and Ublox Max 7Q GPS
modems which allow to enable the GPS low power mode.
Integrated the ultra-low power microcontroller ARM Cortex-M3STM32L1.
Built-in environmental sensor BME680 (gas, pressure, humidity,temperature) and 3-axis MEMS sensor LIS3DH(accelerometer).
SMA/iPEX antenna optional for LoRa and GPS.
Supports latest LoRaWAN 1.0.2 protocol, activation byOTAA/ABP.
Supports programmable bit rate up to 300kbps.
Supports rechargeable battery through micro USB or 5V solarcharging ports.
Supports sleep mode, the power consumption down to 14.5μA.
Supports global license-free ISM band.
Supports I2C, GPIOs, UART and ADC interfaces.
LoRa Module: RAK811 (SX1276 LoRaWAN modem and integrated the ultra-low power microcontroller ARM Cortex-M3 STM32L1)
GPS Module : Ublox Max 7Q modem Environmental
Sensor : BME680 (Gas, Pressure, Humidity, Temperature)3-axis MEMS
Sensor : LIS3DH (accelerometer)
Frequency: EU433, CN470, EU868, US915, AS923, AU915, KR920, IN865
LoRaWAN Version : LoRaWAN V1.0.2
Activation Way : ABP and OTAA
Transmitting : 20dBm (Max)
Receiving : -130dBm (Min)
Peripheral Interface:Micro USB (5V), 30-pin 96Boards Headers (UART, RESET, GPIOS, I2C, ADC) , 2-pin USB Boot jumper , 3-pin UART RX jumper, 2-pin Battery female interface (3.7V) , 2-pin Solar Panel female interface (5V) , Reset Button
LED: Red: the Li-ion Battery charging Status Indication
Green: The Status can be defined by user Blue: The Status can be defined by user
Antenna Interface:RP-SMA Male connector of LoRa Antenna(optional iPEX connector) ,SMA Female connector of GPS Antenna(optional iPEX connector)
Power Consumption: Sleep mode: 14.5μA (Min) Normal mode: 174mA (Max) @ 20dBm and GPS enable
Software : Support open source code
Enhanced AT commands
Driver support for Windows
Working Environment: Outdoor
Physical Dimension:
Dimension (L x W x H): 60mm x 30mm x 11.45mm
Weight: Approximately 5.64 oz Temperature
Range
Operation Temperature: -35° C ~ +60° C
Extended Temperature: -40° C ~ +80° C
Storage Temperature: -40° C ~ +80° C
Application Notes
Hardware Design
Software Development
Tools
Reference: DWM17102702
LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM17111202
LoRaST 433MHz /470MHz /868MHz /915MHz Open Source Long Range Wireless LoRa Transceiver is a small wireless transceiver module offers a very compelling mix of long range, low power consumption and secure data transmission.
Reference: DWM24012601
The Meshtastic starter Kit includes a WisBlock Base board and the RAK4631 WisBlock Core module, already flashed with the Meshtastic firmware. Power the boards up and start sending messages immediately.
Reference: DWM19030101
DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT,RAK2013 Cellular Pi HAT.
Reference: DWM19091701
DWM-RAK2245 SX1301 8 Channels Stamp Edition is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gatewayOS.
Reference: DWM20053103
Brand: Semtech
The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.
Reference: DWM22062201
LoRaWAN Development kit Create IoT applications for different solutions, like environmental sensing, agriculture solutions, GPS trackers.
Reference: DWM20052801
The DWM-RAK7204 is an LPWAN node that serves as an environmental monitoring station. The high-precision sensors, can measure changes in temperature, humidity, gas pressure and provide an indoor air quality index.
Reference: DWM24060501
The RAK5148 Semtech SX1280 LPWAN 2.4 GHz Concentrator Module with a ZOE-M8Q GPS chip onboard allows for easy integration into existing routers or other network equipment with LPWAN gateway capabilities.
Reference: DWM19091602
DWM-RAK7243 Pilot LoRas Gateway Pro Kit with GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT.
Reference: DWM22022501
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM19022801
DWM-RAK2245 Pi HAT based SX1301 8 Channels LoRaWAN gateway with GPS module is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
Reference: DWM22052401
RAK2247 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2247 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM19070805
RAK7205 LoRa Tracker With Solar Panel built on RAK5205 integrated the Ublox Max 7Q module built on SX1276 LoRaWAN modem with low power micro-controller STM32L1.
Reference: DWM22061601
RAK10700 is a GNSS Tracker device with a GNSS modem providing LPWAN and BLE communication using the nRF52 MCU and SX1262 LoRa transceiver of the RAK4631 Core module.
Reference: DWM20060101
Brand: Semtech
DWM-RAK4260 LPWAN Evaluation Board is a WisBlock product that consists of DWM-RAK4260 (DWM-RAK4260 LPWAN Module + Breakout board) and the RAK5005 WisBase
Reference: DWM22062302
This Kit consists of a Sensor Node to measures air temperature, air humidity, barometric pressure, and environment luminosity values. Transmitting data periodically to a LoRaWan® server.
Reference: DWM20053104
Brand: Semtech
DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.
DWM-RAK5205 LoRa Tracker built on SX1276 LoRaWAN modem with low power micro-controller STM32L1, integrated the GPS module is an open all source code products,allowing users to conveniently link to the LoRaWAN network.