Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DWM-RAK2245 Pi HAT Raspberry Pi 3B Lora start kit is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
RAK2245 Pi HAT is a module with Raspberry PI form factor. It can be plugged into Raspberry PI such as Raspberry Pi 3 Model B+ as a complete RF front end of LoRa gateway. This module supports eight channels and is available different variants for global frequency bands. The board is an ultra-compact module which measures only 60mm x 30mm x 14.9mm, inclusive of GPS module and heat sink; this is the smallest LoRaWAN gateway module available in the market. RAK2245 can provide low data rate LoRa radio links in ultra-fast speed. It is powered by a Semtech SX1301 transceiver concentrator that is capable of managing packets from many remotely dispersed end-points. Two Semtech SX125X are integrated for RF front end I/Q transceivers. The RAK2245 Pi HAT is a complete and cost efficient LoRa gateway solution that can help you develop a full LoRa system. This is an economical way to create different solutions like smart grid, intelligent farm and other IoT applications. It is also ideal for manufacturing small series that can expand into more applications.
Compatible with Raspberry Pi 3 Model B+ edition.
SX1301 base band processor, emulates 49 x LoRa demodulators 10 parallel demodulation paths, support 8 uplinks channel, 1 downlink channel.
2 x SX125x Tx/Rx front-ends high/ low frequency.
Supports 5V power supply, integrated level conversion circuit.
TX power up to 27dBm, RX sensitivity down to -139dBm@SF12, BW 125KHz.
Supports latest LoRaWAN 1.0.2 protocol.
Supports global license-free frequency band (EU433, CN470, EU868, US915, AS923, AU915, KR920, IN865 and AS920).
Supports SPI interface.
Integrated the Ublox MAX-7Q GPS Module.
| Pin | Name | Description |
| 1 | 3.3V | 3.3V Supply Voltage |
| 2 | 5V | 5V Supply Voltage |
| 3 | SDA | I2C_SDA (Connect to GPS Module I2C_SDA) |
| 4 | 5V | 5V Supply Voltage |
| 5 | SCL | I2C_SCL (Connect to GPS Module I2C_SCL) |
| 6 | GND | GND |
| 7 | NC | No Connection |
| 8 | UART_RXD | It should be connected to RASPBERRY PI’s UART_TXD. This pin is connected to GPS Module’s UART_RXD internally. |
| 9 | GND | GND |
| 10 | UART_TXD | It should be connected to RASPBERRY PI’s UART_RXD. This pin is connected to GPS Module’s UART_TXD internally. |
| 11 | RESE | SX1301 RESET (GPIO17 of RASPBERRY PI) |
| 12 | NC | No Connection |
| 13 | NC | No Connection |
| 14 | GND | GND |
| 15 | NC | No Connection |
| 16 | NC | No Connection |
| 17 | 3.3V | 3.3V Supply Voltage |
| 18 | NC | No Connection |
| 19 | SPI_ MOSI | It should be connected to RASPBERRY PI’s SPI_ MOSI. This pin is connected to SX1301’s SPI_MOSI internally. |
| 20 | GND | GND |
| 21 | SPI_MISO | It should be connected to RASPBERRY PI’s SPI_MISO. This pin is connected to SX1301’s SPI_MISO internally |
| 22 | NC | No Connection |
| 23 | SPI_CLK | It should be connected to RASPBERRY PI’s SPI_SCLK. This pin is connected to SX1301’s SPI_CLK internally. |
| 24 | SPI_CS | It should be connected to RASPBERRY PI’s SPI_CE0. This pin is connected to SX1301’s SPI_CS internally |
| 25 | GND | GND |
| 26 | NC | No Connection |
| 27 | I2C_SDA | I2C_SDA for HAT ID EEPROM |
| 28 | I2C_SCL | I2C_SCL for HAT ID EEPROM |
| 29 | NC | No Connection |
| 30 | GND | GND |
| 31 | NC | No Connection |
| 32 | NC | No Connection |
| 33 | RESET_GPS | GPS Module reset PIN (GPIO13 of Raspberry Pi) |
| 34 | GND | GND |
| 35 | STANDBY_GPS | GPS Module standby PIN (GPIO19 of Raspberry Pi) |
| 36 | NC | No Connection |
| 37 | NC | No Connection |
| 38 | NC | No Connection |
| 39 | GND | GND |
| 40 | NC | No Connection |
Here is the open source code link: https://github.com/RAKWireless/RAK2245-LoRaGateway-RPi-LoRa-Gateway-OS
Reference: DWM19022001
DWM-RAK7249 is The Enterprise DIY outdoor LoRaWan GATEWAY Builtin OpenWRT OS support 16 channel LoRa/4G/WIFI/GPS .
Reference: DWM19022401
DWM-RAK2245 SX1301 8 Channels Stamp Edition is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
Reference: DWM19022803
DWM-RAK2245 Pi HAT Raspberry Pi 3B Lora tracker start kit is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
Reference: DWM19090601
The LM502 use the newest LoRa Modem SX1262 which provide high transmit power for ultra long range, ultra low power communication for LPWAN application.
Reference: DWM24060501
The RAK5148 Semtech SX1280 LPWAN 2.4 GHz Concentrator Module with a ZOE-M8Q GPS chip onboard allows for easy integration into existing routers or other network equipment with LPWAN gateway capabilities.
Reference: DWM18011601
RAK8211-NB iTracker combines NB-IoT+BLE+GPS+ 5 Sensors Development Board has BLE GPRS GPS three in one module perfectly solves the problem of data interaction and control in the outdoor environment and the three party platform.
Reference: DWM21031002
Brand: Semtech
The DWM-RAK4270 LPWAN Module is based on STM32L071 MCU and an SX1262 LoRa chip integrating a 32-bit ARM Cortex -M0+ MCU provides a number of highly configurable peripherals (configurable as I2C/SPI/UART interfaces).
Reference: DWM22062301
The LoRaWAN GNSS GPS Tracker is with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
Reference: DWM19070801
LoRa Antenna-433MHz /470MHz /868MHz /915MHz 5.8dBi Glass Fiber Antenna with N Female Connector. Out Door Waterproof Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM22062201
LoRaWAN Development kit Create IoT applications for different solutions, like environmental sensing, agriculture solutions, GPS trackers.
Reference: DWM20061601
Brand: Semtech
The RAK7246 is a LoRaWAN® developer gateway is the model without the GPS function. It is a device composed of a the RAK2246 Pi HAT LPWAN Concentrator module and Raspberry Pi Zero W.
Reference: DWM22061601
RAK10700 is a GNSS Tracker device with a GNSS modem providing LPWAN and BLE communication using the nRF52 MCU and SX1262 LoRa transceiver of the RAK4631 Core module.
Reference: DWM20060101
Brand: Semtech
DWM-RAK4260 LPWAN Evaluation Board is a WisBlock product that consists of DWM-RAK4260 (DWM-RAK4260 LPWAN Module + Breakout board) and the RAK5005 WisBase
Reference: DWM18011701
RAK811 LoRa module complies with the latest LoRaWAN Class A & C protocol specifications, it is simple to access LWPA IOT platforms integrates SX1276 and stm32L with TELEC CE FCC KCC certification.
Reference: DWM24012601
The Meshtastic starter Kit includes a WisBlock Base board and the RAK4631 WisBlock Core module, already flashed with the Meshtastic firmware. Power the boards up and start sending messages immediately.
Reference: DWM22052402
RAK2011 is Arduino shield board powered by the Quectel BG96 modem chipset. It supports 2G/EGPRS, 4G/LTE Cat-M1 (eMTC), Cat-NB1 (Nb-IoT), as well as GPS.
Reference: DWM18050801
RAK811 WisNode LoRa Module development board is compatible with Arduino Development Board. It can also be used as an extension board development with Arduino.
Reference: DWM18050301
DWM-RAK813 LoRa and Bluetooth Module nRF52832 and LoRa SX1276 core chip which is a combination of the BLE and LoRa of the relay node module.
Reference: DWM19022803
DWM-RAK2245 Pi HAT Raspberry Pi 3B Lora tracker start kit is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
Reference: DWM18011801
DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.
DWM-RAK2245 Pi HAT Raspberry Pi 3B Lora start kit is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
