Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
The Smart Biometric Monitoring Kit is a comprehensive and customizable IoT kit designed for wearable biometric monitoring applications. This kit includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitness. The kit supports different connectivity options, including LoRaWAN, BLE, LTE-M, and NB-IoT, enabling long-range and short-range communication depending on the use case.
With this kit, users can easily create custom biometric monitoring solutions for a variety of scenarios, including remote patient monitoring, sports performance tracking, and wellness applications. With its range of biometric sensors and connectivity options, it offers a versatile platform for creating customized solutions for a variety of use cases.
Compatible with Arduino IDE
USB C interface for data, power, and battery charging
Supports Li-Ion batteries with built-in solar charging capabilities
Multiple communication protocols: LoRa/LoRaWAN, BLE, LTE-M and NB-IoT.
Two WisBlock Core modules - RAK4631 LPWAN Module(opens new window)
One standard RAK19007 WisBlock Base Board (opens new window)with 4 sensor slots and 1 IO slot
One standard RAK19003 WisBlock Mini Base Board with 2 sensor slots
Two RAK12003 IR Contactless Temperature Sensor
Two RAK12012 Heartrate Pulse Oximetry Sensor
LoRaWAN Supported bands: RU864, IN865, EU868, AU915, US915, KR920, and AS923
Cellular variant dependent on a country: Two (2) RAK13101 (opens new window)with GSM/GPRS capability
GPS built-in on Cellular modules
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM22022501
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM22082903
RAK7289 WisGate Edge Pro is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM22022501
RAK7268 WisGate Edge Lite 2 Sx1302 Openwrt 8-channel indoor LoRaWAN gateway with built-in Ethernet and Wi-Fi connectivity supports LTE uplink communication connections (optional).
Reference: DWM20053103
Brand: Semtech
The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.
Reference: DWM19070803
RAK7258 Micro Gateway is a full 8-channel LoRa Gateway with built-in Ethernet connectivity for a straightforward setup. Additionally, there is an onboard Wi-Fi setup that allows it to be easily configured via the default Wi-Fi AP mode.
Reference: DWM22123002
RAK2013 4G/ LTE Nb-IoT is a Raspberry Pi 4B compatible cellular communication module It supports the following standards: 4G/LTE, Nb-IoT, CAT-M/CAT1/CAT4 Cellular.
Reference: DWM24081401
RAK7391 IOT LoRaWAN Gateway Carrier Board with a RAK5146 LPWAN Concentrator module adapted Raspberry Pi CM4 is a great board to build your solution, whether a gateway, edge device, or a general-purpose computer!
Reference: DWM23100501
LoRaWAN GPS Tracker kit with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
Reference: DWM23080609
The IOT Smart Industry 4.0 Kit with RAK5860 NB-IOT module Quectel BG77 includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
Reference: DWM24092501
RAK8213 is a multi-band LTE Cat M1/Cat NB1/EGPRS module based on the Quectel EG95 with a standard PCI Express® form factor (Mini PCIe). It offers a maximum data rate of 375 Kbps downlink and 375 Kbps uplink.
Reference: DWM23080508
The IOT Movement Detection Kit with RAK13101 GSM module Quectel MC20CE this kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
Reference: DWM20053102
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM23072801
RAK2270 is a sleek sticker tracker for LoRaWAN® designed like a label, making it easy to attach to any product. It offers real-time location tracking through the Helium network server's advanced features.
Reference: DWM23051901
RAK3272S Breakout Board is specifically designed to allow easy access to the RAK3172 low power long range LoRawan module the board in order to simplify development and testing.
Reference: DWM23080605
IoT Starter Kit with RAK13101 GSM module Quectel MC20CE including LoRaWAN, BLE, LTE-M/NB-IoT, and a range of different modules, including temperature/humidity, accelerometer, barometer, ambient light, and GPS. It also supports multiple outputs such as a buzzer, RGB LED, and I2C OLED.
Reference: DWM22123001
The Raspberry Pi 4 Model B is the best single-board computer to develop your IoT project, and start your first gateway for NB-IoT/Cat-M and LoRaWAN with the RAK Pi HAT.
Reference: DWM25042504
The Hybrid mioty® and LoRaWAN® Gateway Based on CM4 supports both mioty and LoRaWAN® protocols. This gateway is ideal for urban and industrial IoT deployments, supporting long-range communication for both Mioty and LoRaWAN® networks.
Reference: DWM23080101
The RAK Agriculture Kit with RAK5860 NB-IOT module Quectel BG77 with LoRaWAN, NB-IoT The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
