Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RAK7391 IOT LoRaWAN Gateway Carrier Board with a RAK5146 LPWAN Concentrator module adapted Raspberry Pi CM4 is a great board to build your solution, whether a gateway, edge device, or a general-purpose computer!
The RAK7391 is a Raspberry Pi Compute Module 4 (CM4) carrier board. It is a Mini-ITX with multiple slots for radio and WisBlock modules. The RAK7391 is the motherboard in the WisGate Connect.
The RAK7391 is a great board to build your solution, whether a gateway, edge device or a general-purpose computer!
The board has several interfaces to meet the needs of different developers: HDMI, 1GB Ethernet (with optional PoE support), 2.5GB Ethernet, USB2 & USB3, mPCIe, CSI, DSI, M.2, WisBlock...
Of course, it can also be used as a multichannel/multi-band LoRaWAN gateway product supporting up to 4 separate modules (for instance: you can have a 16-channel sub-GHz LoRaWAN gateways plus a 2.4 GHz LoRaWAN gateway in the same device). It has flexible power supply modes such as DC terminal, Phoenix terminal, and POE (optional). The RAK7391 provides a fan interface to dissipate heat for the CPU that you can control based on the CPU temperature. It can monitor the power supply. In the event of a power failure, the ultra-capacitors can provide power to the system, so that the system can send a notification or easily survive micro-cuts in the power supply.
The RAK7391 can also be used as an Industrial gateway leveraging existing WisBlock modules (ModBUS, 4-20mA, 0-5V, general IO), and Edge Gateway, a Standalone gateway for a private LoRaWAN deployment and the development platform of your next product.
See the hardware compatibility section below.
Accepts the complete range of CM4 modules
2x WisBlock IO connectors
3x mPCIe slots
1x M.2 B-Key interface
Flexible power supply modes such as DC terminal, Phoenix terminal, and POE (optional)
HDMI 2.0 connector
1 GB Ethernet with PoE support (optional)
2.5 GB Ethernet
1x USB2.0 + 2x USB3.0
Type-C USB socket for updating the CM4
Micro SD Card socket for CM4 Lite modules
Standard fan connector, compatible with 12 V and 5 V fans (jumper cap configuration)
Output power connector (+5 V, +12 V with PoE)
MIPI DSI display FPC connector (22 pin 0.5 mm pitch cable)
2x MIPI CSI-2 camera FPC connectors (22 pin 0.5 mm pitch cable)
Raspberry Pi HAT connector
PoE support via an optional module
Debug UART port
RTC with battery socket and ability to wake up CM4
Configuration jumpers (Wi-Fi and BLE enabling/disabling, EEPROM write enable, Buzzer enabling)
We have prepared a custom Linux distribution for the WisGate Connect called RAKPiOS. The RAKPiOS is a fork of the Raspberry Pi OS with all the required drivers to use the device, some security changes, helper scripts, and Docker included by default.
With the included rakpios-cli you can easily configure the network and deploy several IoT services from a curated list of docker containers available from the device.
1 x RAK7391 CM4 carrier board
1 x RAK5146 LPWAN Concentrator module
Set of jumpers
Phoenix male connector
12V2A power supply
Set of standoffs and screws to protect the board
Set of screws for the MiniPCIe, M.2, and WisBlock slots
LoRaWAN gateway (multichannel, multiband)
Industrial gateway leveraging existing WisBlock modules (Modbus, 4-20mA, 0-5V, general IO)
Edge gateway / Standalone gateway
Development platform for new products
Reference: DWM22082502
RAK5146 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1303 and SX126X for Listen Before Talk feature, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.
Reference: DWM22091001
CM4 Raspberry pi Computer module 4 with wireless check out the full range of Compute Modules 4.
Reference: DWM240813
The Sensor Modules pack includes a range of sensors for sensing environmental conditions (temperature, humidity, barometer pressure, lighting), location and movement conditions (GNSS location, accelerometers, and movement detection), soil monitoring, and many more specific sensors (Radar, fingerprint, Infrared, UV, etc.).
Reference: DWM20053001
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM23080408
RAK Industrial IO and Communication Kit with RAK13101 GSM module Quectel MC20CE which is including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control.
Reference: DWM23080402
Indoor Location Tracker Kit with LoRaWAN, The Kit is providing all components to build a UWB based indoor tracking and location system .It includes motion sensors and four UWB modules.
Reference: DWM24011501
The Raspberry Pi 4 LoRaWAN Kit is Based on RAK2287 Concentrator and Raspberry Pi 4 Model B use it to Build your developer gateway for LoRaWAN application.
Reference: DWM23080603
LoRaWAN IOT Smart Biometric Monitoring Kit includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
Reference: DWM23080610
The IOT Smart Industry 4.0 Kit with RAK13101 GSM module Quectel MC20CE includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
Reference: DWM22062302
This Kit consists of a Sensor Node to measures air temperature, air humidity, barometric pressure, and environment luminosity values. Transmitting data periodically to a LoRaWan® server.
Reference: DWM20053104
Brand: Semtech
DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.
Reference: DWM22082902
RAK7289 WisGate Edge Pro is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 8 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23051902
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
Reference: DWM23080406
Environment Air Quality Sensor Kit Include the sensors for temperature, humidity, pressure, UV, CO2, Particulate Matter, VOC, and IAQ. Additionally, it supports different connectivity options like LoRaWAN, BLE.
Reference: DWM22062301
The LoRaWAN GNSS GPS Tracker is with a sensor to detect location change every set time interval and with solar panel built-in on the enclosure Use this kit for tracking and monitoring cargo, vehicles, and marine vessels.
Reference: DWM23080503
Outdoor GPS GNSS Location Tracker Kit includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM22082602
The new A-fix Bracket Kit will help you easily install and optimally position your antennas for any use case scenario, to ensure the best coverage possible
Reference: DWM22121401
RAK7244 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4 / D4+ / D4P RAK7244 / RAK7244C / RAK7244P.
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
RAK7391 IOT LoRaWAN Gateway Carrier Board with a RAK5146 LPWAN Concentrator module adapted Raspberry Pi CM4 is a great board to build your solution, whether a gateway, edge device, or a general-purpose computer!
