Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device. The sensor monitors parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device designed to create a healthy, safe, and comfortable indoor environment. LoRaWAN wireless communication technology provides reliable, long-range, low-power monitoring of key air quality parameters to help individuals and organizations maintain optimal indoor air quality, promoting health, well-being, and productivity.
Multi-Parameter Real-Time Monitoring
The sensor monitors a comprehensive set of environmental parameters with the following ranges and precision:
| Parameter | Range | Precision | Description |
|---|---|---|---|
| PM1.0, PM2.5, PM10 | 0 µg/m³ – 2000 µg/m³ | ±10% | Measures particulate matter of different sizes, critical for respiratory health. |
| CO2 | 400 ppm – 5,000 ppm | ±30 ppm | Indicates ventilation quality and occupant density. High levels may impair cognition. |
| TVOC | 0 – 60,000 ppb | ±15% | Measures total volatile organic compounds, common indoor pollutants. |
| Temperature | -20°C – 60°C | ±0.6°C (-20°C to -10°C) ±0.4°C (-10°C to 5°C) ±0.2°C (5°C to 60°C) |
Monitors ambient temperature for comfort and safety. |
| Humidity | 10% – 100% RH | ±4% (10-20% RH) ±2% (20-80% RH) ±4% (80-100% RH) |
Tracks relative humidity to maintain healthy indoor moisture levels. |
The LRS10701-CPV0 uses LoRaWAN® technology, providing:
Long-range connectivity with low power consumption.
Frequency bands supported(typical): EU868 / US915 / AU915 / AS923.
Transmit power: 14 dBm.
Receiver sensitivity: -140 dBm.
OTAA Class A mode for secure and efficient network connection.
Powered by 2 x 3.6V C size ER26500 batteries or DC power (8.5-15V DC, max 1A), the device supports:
Up to 3.5 years of battery life under typical usage.
Measurement intervals are configurable, typically with DC power every 10 minutes (battery powered) or more frequently.
Data upload intervals (heartbeat) every 10 minutes (battery and DC power).
Features a color LED bar that visually represents the current air quality level, allowing quick and easy assessment at a glance.
Allows customization of measurement intervals and alarm thresholds to suit different environments and user preferences.
Designed to meet WELL Building Standard v2.2 requirements, supporting buildings aiming to promote occupant health and well-being through superior indoor air quality management.
| Specification | Details |
|---|---|
| Wireless Connectivity | LoRaWAN® |
| Frequency Bands(typical) | EU868 / US915 / AU915 / AS923 |
| Transmit Power | 14 dBm |
| Receiver Sensitivity | -140 dBm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Storage Humidity | 10% to 95% RH |
| Dimensions (LxWxH) | 119 x 119 x 37.5 mm |
| Weight | Approx. 175 g (excluding battery/DC power) |
| Installation | Wall mounting bracket |
| Antenna Type | Internal antenna |
| Power Supply | 2 x 3.6V C size ER26500 batteries or 8.5-15V DC power adapter |
| Battery Life | Up to 3.5 years (typical) |
| Measurement Interval | Battery: every 10 mins DC Power: every 10 mins |
| Data Upload Interval | Every 10 minutes |
| Mode | OTAA Class A (LoRaWAN Network) |
1. Health and Safety in New Buildings and Renovations
Ideal for monitoring particulate matter, CO2, and TVOC levels in newly constructed or renovated spaces, ensuring air quality remains safe during critical initial occupancy periods. Suitable for homes, schools, daycare centers, and healthcare facilities.
2. Smart Office Air Quality Monitoring and Management
Enables continuous monitoring of key air quality parameters to optimize workplace environments, enhancing occupant comfort, reducing health risks, and improving productivity.
3. Smart Classroom Air Quality Monitoring
Supports educational institutions by maintaining optimal air quality through real-time monitoring and integration with ventilation and climate control systems, fostering healthier and more productive learning environments.
1x LRS10701-CPV0 Environmental Sensor
1x Wall Mounting Kit
Reference: DWM22092802
WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time by RS485 interface to WSC1-L which can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Reference: DWM24011902
The AQS01-L is an Indoor LoRaWAN Air Quality Sensor designed to measure the surrounding environment parameters, including: CO2, Temperature, Relative Air Humidity, and Air pressure, and then upload to an IoT server via the LoRaWAN wireless protocol.
Reference: DWM24081301
The Sensor Modules pack includes a range of sensors for sensing environmental conditions (temperature, humidity, barometer pressure, lighting), location and movement conditions (GNSS location, accelerometers, and movement detection), soil monitoring, and many more specific sensors (Radar, fingerprint, Infrared, UV, etc.).
Reference: DWM23080403
The WisBlock Environment Sensor Kit is a comprehensive IoT kit that includes sensors for monitoring various environmental conditions. It features sensors for temperature, humidity, pressure, UV, CO2, Particulate Matter, VOC, and IAQ. Additionally, it supports different connectivity options like LoRaWAN, BLE, LTE-M, and NB-IoT.
Reference: DWM23080507
The IOT Movement Detection Kit with RAK5860 NB-IOT module Quectel BG77 this kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
Reference: DWM23080504
Light and Color Kit with RAK5860 NB-IOT module Quectel BG77 ncludes RGB, visible, and UV light sensors, as well as LED bar and RGB modules, providing a versatile platform for measuring and controlling light and color in a wide range of applications.
Reference: DWM23080602
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
Reference: DWM20053001
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM22101701
DWM-M702 seven-in-one sensor module is a cost-effective digital serial port output sensor module, which adopts 485/UART output mode and integrates CO2, HCHO, TVOC,PM2.5,PM10, temperature and humidity.
Reference: DWM23080611
The LoRaWAN IOT Smart Industry 4.0 Development Kit includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
Reference: DWM18042701
LoRa Antenna-433MHz /470MHz /868MHz /915MHz 8dBi Glass Fiber Antenna with N Female Connector. Out Door Waterproof Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM20060101
Brand: Semtech
DWM-RAK4260 LPWAN Evaluation Board is a WisBlock product that consists of DWM-RAK4260 (DWM-RAK4260 LPWAN Module + Breakout board) and the RAK5005 WisBase
Reference: DWM23051902
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
Reference: DWM24011501
The Raspberry Pi 4 LoRaWAN Kit is Based on RAK2287 Concentrator and Raspberry Pi 4 Model B use it to Build your developer gateway for LoRaWAN application.
Reference: DWM23010802
RAK7431 is a Modbus RS485 to LoRaWAN® bridge designed for industrial applications. The device relays Modbus data using the LoRaWAN network as a means of wirelessly transmitting to and from the end devices.
Reference: DWM23080406
Environment Air Quality Sensor Kit Include the sensors for temperature, humidity, pressure, UV, CO2, Particulate Matter, VOC, and IAQ. Additionally, it supports different connectivity options like LoRaWAN, BLE.
Reference: DWM22082902
RAK7289 WisGate Edge Pro is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 8 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23080610
The IOT Smart Industry 4.0 Kit with RAK13101 GSM module Quectel MC20CE includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device. The sensor monitors parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
