Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RAK Industrial IO and Communication Kit with RAK13800 Enthernet Module with WIZnet W5100S-L chip which is including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control.
The WisBlock Industrial IO and Communication Kit is an IoT kit that is versatile and customizable for industrial applications. This kit offers a range of interfaces, including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control. It also supports different connectivity options, such as LoRaWAN, BLE, and PoE Ethernet, making integration with various systems easier.
Whether you are looking to measure and control various parameters in your industrial setting or interface with different systems, the WisBlock Industrial IO and Communication Kit is the perfect solution. The kit includes a range of module interfaces that allow you to monitor and control different variables, making it ideal for various applications. With its customizable design and flexibility, the WisBlock Industrial IO and Communication Kit offer a complete solution for a range of industrial IoT applications. It allows for easy expansion and customization, making it perfect for those who require specific functionality.
Compatible with Arduino IDE
USB C interface for data, power, and battery charging
Supports Li-Ion battery with built-in solar charging capability
Multiple communication protocols: LoRa/LoRaWAN, BLE, LTE-M (optional), and NB-IoT (optional)
Two WisBlock Core modules - RAK4631 LPWAN Module
One standard RAK19007 WisBlock Base Board with 4 sensor slots and 1 IO slot
One RAK19001 Dual IO WisBlock Base Board with 6 sensor slots and 2 IO slots
Two RAK13005 LIN Bus Modules
Two RAK13006 CAN Bus Modules
Two RAK13010 SDI-12 Modules
Two RAK5801 4-20 mA Interface Modules
Two RAK5802 RS485 Interface Modules
Two RAK5811 0-5 V Interface Modules
Two Relay modules; you can choose between RAK13001 110 V and RAK13007 220 V versions
LoRaWAN supported bands: RU864, IN865, EU868, AU915, US915, KR920, and AS923
Ethernet using RAK13800 module
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22082903
RAK7289 WisGate Edge Pro is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM20053102
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM23010803
RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM24081401
RAK7391 IOT LoRaWAN Gateway Carrier Board with a RAK5146 LPWAN Concentrator module adapted Raspberry Pi CM4 is a great board to build your solution, whether a gateway, edge device, or a general-purpose computer!
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM23080508
The IOT Movement Detection Kit with RAK13101 GSM module Quectel MC20CE this kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
Reference: DWM20053101
Brand: Semtech
DWM-RAK4200 LPWAN Module includes an STM32L071 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 1.5uA in sleep mode and high LoRa® output power up to 19dBm max in work mode.
Reference: DWM22121301
RAK7248 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4H/D4H+/D4HP RAK7248/RAK7248P/RAK7248C.
Reference: DWM24060501
The RAK5148 Semtech SX1280 LPWAN 2.4 GHz Concentrator Module with a ZOE-M8Q GPS chip onboard allows for easy integration into existing routers or other network equipment with LPWAN gateway capabilities.
Reference: DWM23080502
Outdoor GPS GNSS Location Tracker Kit with RAK13101 GSM module Quectel MC20CE includes two precise GPS/GNSS modules for tracking outdoor locations it has 9-DOF sensors and accelerometers, which aid in tracking object movements and direction changes.
Reference: DWM23080602
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
Reference: DWM23100901
RAK7289V2 WisGate Edge Pro Version 2 is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 8 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23080608
The LoRaWAN Smart Home Office Security Kit includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM22122903
The LoRaWAN Sensor Hub weather station is equipped with high-precision sensors that measure wind speed and direction, atmospheric pressure, humidity, and temperature. It is suitable for Smart Cities, Smart Farms, Smart Agricultural, environmental monitoring, and other use cases.
Reference: DWM23080611
The LoRaWAN IOT Smart Industry 4.0 Development Kit includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
Reference: DWM19030101
DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT,RAK2013 Cellular Pi HAT.
Reference: DWM19022402
DWM-RAK7249 is The Enterprise DIY outdoor LoRaWan GATEWAY Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
RAK Industrial IO and Communication Kit with RAK13800 Enthernet Module with WIZnet W5100S-L chip which is including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control.
