Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm).
WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.
The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance
WSS-06 is designed to support the Dragino Weather station solution.
Users only need to connect the WSS-06 RS485 interface to WSC1-L, WSC2-LB,. The weather station's main processors, WSC1-L, WSC2-LB, can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.
RS485 Total Solar Radiation sensor
Measure Total Radiation between 0.3～3μm（300～3000nm）
Measure Reflected Radiation if the sensor area is towards the ground.
Weather Station
Input Power: DC 5~24V
Interface: RS-485
Detect spectrum:0.3～3μm（300～3000nm）
Measure strength range:0～2000W/m2
Resolution:0.1W/m2
Accuracy:±3%
Yearly Stability: ≤±2%
Cosine response: ≤7% (@ Sun angle 10°)
Temperature Effect2%（-10℃～40℃）
Working Temperature:-40℃～70℃
Working Humidity:10～90%RH
Power Consumption: 4mA @ 12v
User Manual Based on the WSC1-L
User Manual Based on the WSC2-LB
Reference: DWM22040502
WSC1-L Dragino Weather Station solution Main Process Unit can upload these sensor data to IoT server via LoRaWAN wireless protocol.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22091602
WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.
Reference: DWM22092201
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
Reference: DWM25011302
WSS-08 Optical Rain Guage Weather Station Kit is a weather monitor instrument to monitor rainfall.
Reference: DWM18121802
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
Reference: DWM20033101
ER18505+SPC1520 Super Pulse Cap 4000mAh Li/SOCI2 unchargable battery for LSN50 Sensor nodes.
Reference: DWM23021007
The LHT65S-NE117 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor use an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.
Reference: DWM25022701
The MDS120-LS is a LoRaWAN Microwave Radar distance sensor with a Measure Range: of 15 ~ 1200cm supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM22091302
NSPH01 NB-IoT Soil PH Sensor designed to measure the soil pH and soil temperature which include TCP, MQTT, UDP and CoAP for different application requirement for IoT of Agriculture.
Reference: DWM20090101
LoRa Antenna-BLG-AN-040-868MHz /915MHz Glass Fiber antenna for LoRaWAN Gateway LoRa IoT Application.
Reference: DWM23090801
The AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM23072201
The SW3L-LB is a new LoRaWAN Outdoor water Flow Sensor that supports BLE configuration and wireless OTA update which is used to detect water flow volume and uplink to the IoT server via the LoRaWAN network it can be used for indoor and outdoor use.
Reference: DWM17112001
EC25 Mini PCIe IOT LoRa Gateway 4G Cellular Module is Quectel EC25 which is used in the LG308 and DLOS8 IOT LoRa Gateway as bridge of 4G cellular wireless network.
Reference: DWM19090601
The LM502 use the newest LoRa Modem SX1262 which provide high transmit power for ultra long range, ultra low power communication for LPWAN application.
Reference: DWM25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes which are based on DS18B20 convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM22110601
The CPN01 is an NB-IoT Dry Contact Sensor. It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the dry contact status, open time, and open counts in the IoT Server.
Reference: DWM23030701
MH-Z19E NDIR infrared gas module Built-in temperature compensation; and it has UART output and PWM output It uses the principle of non-dispersive infrared (NDIR) to detect CO2 in the air and has good selectivity. No oxygen dependence, long life, etc.
Reference: DWM25030201
PS-NB-D NB-IoT Differential Pressure Sensor uses Differential Pressure Sensor includes various models to cover NB-IoT wireless transmission and different ranges of pressure measurements.
WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm).
