- On sale!
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The LSN50v2-D20 is a LoRaWAN Temperature Sensor for Internet of Things solution. It can be used to measure the temperature of air, liquid or object, and then upload to IoT server via LoRaWAN wireless protocol.
The Dragino LSN50v2-D20 is a LoRaWAN Temperature Sensor for Internet of Things solution. It can be used to measure the temperature of air, liquid or object, and then upload to IoT server via LoRaWAN wireless protocol.
The temperature sensor used in LSN50v2-D20 is DS18B20, which can measure -55°C ~ 125°C with accuracy ±0.5°C (max ±2.0 °C). The sensor cable is made by Silica Gel, and the connection between metal probe and cable is double compress for waterproof, moisture-proof and anti-rust for long term usage. LSN50v2-D20 supports temperature alarm feature, user can set temperature alarm for instant notice.
LSN50v2-D20 is powered by, it is designed for long term use up to 10 years. (Actually Battery life depends on the use environment, update period. Please check related Power Analyze report).
Each LSN50v2-D20 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to local LoRaWAN server and it will auto connect after power on.
✓ LoRaWAN v1.0.3 Class A
✓ Ultra-low power consumption
✓ External DS18B20 Probe (default 2meters)
✓ Measure range -55°C ~ 125°C
✓ Temperature alarm
✓ Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
✓ AT Commands to change parameters
✓ Uplink on periodically or Interrupt
✓ Downlink to change configure
➢ MCU: STM32L072CZT6
➢ Flash:192KB
➢ RAM:20KB
➢ EEPROM: 6KB
➢ Clock Speed: 32Mhz
Common DC Characteristics:
➢ Supply Voltage: built in 8500mAh Li-SOCI2 battery
➢ Operating Temperature: -40 ~ 85°C
➢ Range: -55 to + 125°C
➢ Accuracy ±0.5°C (max ±2.0 °C).
➢ Frequency Range,
✓ Band 1 (HF): 862 ~ 1020 Mhz
➢ 168 dB maximum link budget.
➢ High sensitivity: down to -148 dBm.
➢ Bullet-proof front end: IIP3 = -12.5 dBm.
➢ Excellent blocking immunity.
➢ Built-in bit synchronizer for clock recovery.
➢ Preamble detection.
➢ 127 dB Dynamic Range RSSI.
➢ Automatic RF Sense and CAD with ultra-fast AFC.
➢ LoRaWAN 1.0.3 Specification
➢ Sleeping Mode: 20uA
➢ LoRaWAN Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
✓ Wireless Alarm and Security Systems
✓ Home and Building Automation
✓ Industrial Monitoring and Control
✓ Long range Irrigation Systems.
Datasheet_LSN50v2-D20_LoRaWAN_Temperature_Sensor.pdf
Reference: DWM20022601
LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node with external antenna,It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.
Reference: DWM20022602
The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.
Reference: DWM22071801
The LSN50v2-D22 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM22071802
The LSN50v2-D23 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM22082509
The LDS03A is an Open/Close LoRaWAN Door Sensor. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
Reference: DWM21072702
The N95S31B SHT31 NB-IoT Outdoor Temperature and Humidity Sensor be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: DWM20022603
LT-22222-L is the Dragino LT series I/O Modules, are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
Reference: DWM25030202
PS-NB-I with an Immersion Installation Type Air /Water Pressure Sensor that can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the NB-IOT server.
Reference: DWM17110902
L80-R is an ultra compact GPS POT (Patch on Top) module with an embedded 15.0mm × 15.0mm × 4.0mm patch antenna.
Reference: DWM23122604
DDS04-NB is an NB-IoT 4-Channels Distance Sensor node that is capable of adding up to four Ultrasonic Sensors to measure four distances at the same time. the sensor needs to be bought separately.
Reference: DWM25030501
The SW3L-LS is a LoRaWAN Flow Sensor. It detects water flow volume and uplinks to the IoT server via the LoRaWAN network. It can detect the water flow status and send an Alarm, to avoid waste from water usage such as a broken toilet case.
Reference: DWM24012401
The MS48-LR is an open-source LoRaWAN to Modbus Gateway. It can connect various LoRaWAN devices to MS48-LR, and use PLC to access these devices via Modbus network.
Reference: DWM18011503
LGT-92 LoRaWAN GPS Tracker with 9-axis accelerometer is an open source GPS tracker base on Ultra Low Power STM32L072 MCU and SX1276/1278 LoRa Module.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM23070203
LHT65N-E31F includes a built-in Temperature & Humidity sensor and has an external Sensirion SHT31F high accurancy Temperature & Humidity sensor probe is a Long Range LoRaWAN Sensor.
Reference: DWM22122901
The LWL03A is a LoRaWAN Water Leak Controller use a Water Leak Cable on the ground to detect water leakage. The water leak cable is sensitivity, when there is water over the leak cable.
Reference: DWM25011501
The D20-NB and D20S-NB NB-IoT Temperature Sensors uplink methods including MQTT, MQTTs, UDP & TCP support BLE configure and OTA update, convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM22082601
The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has a USB Type-C sensor connector to connect to external sensors such as an external temperature sensor.
Reference: DWM23021003
The MDS200-NB is an NB-IoT Microwave Radar distance sensor. It uses a 24GHz Microwave to detect the distance between the sensor and different objects. It can sense the correct distance even if there is water or thick dust on the sensor.
Reference: DWM22082512
The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels which is fully compatible with RPi3B/3B+/4.
The LSN50v2-D20 is a LoRaWAN Temperature Sensor for Internet of Things solution. It can be used to measure the temperature of air, liquid or object, and then upload to IoT server via LoRaWAN wireless protocol.