Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
LoRa Antenna-BLG-AN-040-868MHz /915MHz Glass Fiber antenna for LoRaWAN Gateway LoRa IoT Application.
LoRa Antenna-BLG-AN-040-868MHz /915MHz Glass Fiber antenna for LoRaWAN Gateway LoRa IoT Application.
Fiber glass antenna designed for LoRa IoT Application.
Antenna long:40cm
Omni Directional
Average Gain: 3dBi
Frequency range: 860 ~ 930Mhz (Different Models)
Mounting support for pole or wall
Extend 60cm N-Female to SMA plug cable.
Package Dimension: Φ 22 x L400 ±10mm
BLG-AN-040 Fiber Glass Antenna x 1
N-Female to SMA Plug cable x 1
Mounting Support x 1 set
Reference: DWM17102702
LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM18110501
LG308 8 Channels Indoor LoRaWAN Pico Gateway is an open source LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: DWM19090402
The LPS8 is an open source LoRaWAN Gateway Build in SX1308 and SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM20072901
The DLOS8 Outdoor LoRaWAN Gateway includes 1pcs SX1301 and 2pcs SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM20072903
The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution.
Reference: DWM22091403
ES-261520 3.6V 8500mAh Li/ SOCI2 Battery for Dragino IOT sensor nodes like the LSN50-V2, LSN50v2-D20, LDDS75, LSE01,20, LSN50-V2-S31.
Reference: DWM21031502
The DWM-AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM22110603
Recharge PCB Kit is Li-Ion Battery Charger which can be used for LSN50v2 & RS485-BL to replace the default one time battery and connect to solar panel.
Reference: DWM23101803
The S31-NB and S31B-NB are NB-IoT Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via NB-IoT network.
Reference: DWM23021005
The LMDS120 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
Reference: DWM22122902
LG01v2 uses Open Source Linux system design for peer to peer single channel LoRa protocol instead of LoRaWAN protocol,lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet or Cellular Network (via Optional 4G module).
Reference: DWM23070102
D23-LB is a LoRaWAN Temperature Sensor with 3 x DS18B20 supports BLE configure and wireless OTA update.
Reference: DWM18110502
LT-33222-L is The Dragino LT series I/O Modules are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
Reference: DWM22100801
AN-304C LoRaWAN PIR motion sensor node is a wireless infrared alarm which is based on passive infrared technology to detect a motion or occupancy.
Reference: DWM22101701
DWM-M702 seven-in-one sensor module is a cost-effective digital serial port output sensor module, which adopts 485/UART output mode and integrates CO2, HCHO, TVOC,PM2.5,PM10, temperature and humidity.
Reference: DWM22082512
The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels which is fully compatible with RPi3B/3B+/4.
Reference: DWM23101802
The RS485-LB is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload via LoRaWAN network to IoT server.
Reference: DWM24011402
The SPH01-NB is NB-IoT Soil pH Sensor for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level.
Reference: DWM18022201
Dragino LoRa IoT Development Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology.it will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
LoRa Antenna-BLG-AN-040-868MHz /915MHz Glass Fiber antenna for LoRaWAN Gateway LoRa IoT Application.
