Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
Preferential price Special offer Sensors for Internet of things Weather station suite.
The 9 set contains:
1. Wind speedSensor, white box size 15X16.5X8CM
2. Wind directionsensorWhite box size 18.5X14X6.5CM
3.rain sensorWhite box size 9.5X15.5X6.5CM
4, stainless steel vertical pole 1, single length 30CM
5, bar length 29CM
6. Rainfall support
7, bandage
8. Stainless steel hoop
9. Loosening screws
All single package size 20X18X30CM.
10.Enclosure for IOT module
About the Secondary development:
Wind speed is passive switch quantity, wind speed sensor, turn 1 turns, 2 pulse =2HZ.
Formula for wind speed: m/s=wind speed Hz * 0.34
Rainfall is passive switch, rain bucket reverses once =0.33mm
Wind direction: resistance network, equivalent to stepping potentiometer, the user connected to a 10K pull-up resistance voltage, SCM AD can detect the voltage.
The wind direction is marked with NSWE direction.
Reference: DWM18121801
SHT20+BMP280 High Precision Temperature Humidity and Barometer Sensor Module for weather station an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM18121803
DWM-51WS3 is high precision meteorological measurement module, which support to measure wind direction, wind speed, rainfall, temperature, humidity, pressure measurement mode, secondary development output with APRS data.
Reference: DWM23041801
The LHT65N-E2 is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM22092201
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM14060701
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM20041503
M5StickC ENV Hat in-build with DHT12, BMP280 and BMM150 sensors detect the temperature, humidity, air pressure and magnetic field.
Reference: DWM14101903
Low cost DWM-FC-28 Soil Humidity Detection Sensor Module can be used to detect soil moisture.
Reference: DWM14103102
DWM-DHT11 Digital Humidity Temperature Sensor for Arudino.
Reference: DWM20030403
ESP32-A1S Wi-Fi+Bluetooth+Audio Development Kit it can work as a minimum independent system which offers support for Google’s Assistant and Amazon’s Alexa.
Reference: DWM23070203
LHT65N-E31F includes a built-in Temperature & Humidity sensor and has an external Sensirion SHT31F high accurancy Temperature & Humidity sensor probe is a Long Range LoRaWAN Sensor.
Reference: DWM22051801
The LHT65N is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM17080701
AM2301 DHT21 Capacitive Digital Temperature & Humidity Sensor is wired with DHT21 or AM2301 sensors.
Reference: DWM17111901
The TH06W is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Reference: DWM18121801
SHT20+BMP280 High Precision Temperature Humidity and Barometer Sensor Module for weather station an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
