- -$0.20

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Low cost DWM-FC-28 Soil Humidity Detection Sensor Module can be used to detect soil moisture.
Descriptions
Aesthetic | |
Color | Blue |
Connectivity | |
Ports | VCC / GND / DO |
Electronic Components | |
Architecture | Arduino |
Operating Voltage | 3.3-5 -volt |
PCB Size | 32*14 mm |
Package | |
Package Type | Retail |
Package Contents | 1*Soil Humidity Sensor Module, 2*Dupont Wires |
Dimensions us | metric | |
Cable Length | 20 cm |
Depth | 43 mm |
Height | 7 mm |
Width | 14 mm |
Product Weight | 6.9 g |
Commonly Asked Questions:
Q1. Why are these called "Arduino Compatible"?
A1.The Arduino group demanded us to remove their logos and rename theseproducts so that they do not lead customers to believe they are the sameunits sold by Arduino.
Q2. Are these real Arduinos, then?
A2. We cannot answer that question without starting a war :(. Officially, the answer is we do not know.
Q3. Are these 100% compatible with the "normal" Arudinos?
A3.Yes, they really are completely compatible with "normal" Arduinos.Build quality looks the same and everything (studio, library, tools,etc) just works. Just read the reviews here, here, here, and here.
Q4. What if Im still concerned about the missing logos and about this being named as "Arduino Compatible"?
A4.If youre still in doubt, please buy from Arduinos official dealers.Yes they are more expensive, but if youre still worried wed rather nottake your order. We do not make these afterall and we are providing allthe information we know. Dont kill the messenger.
Reference: DWM14101901
Crown YZW A123 lithium battery DIY essential 22AWG silicone wire balancing charge plug 2.54XH.
Reference: DWM14101902
Low cost New Temperature and Relative Humidity Sensor DHT11 Module, Arduino adope Temperature and Humidity Sensor module.
Reference: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Reference: DWM23041801
The LHT65N-E2 is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM22092201
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
Reference: DWM19090401
The Dragino LHT65 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor with an external sensor connector can be used for more than 10 years.
Reference: DWM20041503
M5StickC ENV Hat in-build with DHT12, BMP280 and BMM150 sensors detect the temperature, humidity, air pressure and magnetic field.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM17111901
The TH06W is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM22051801
The LHT65N is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM18121803
DWM-51WS3 is high precision meteorological measurement module, which support to measure wind direction, wind speed, rainfall, temperature, humidity, pressure measurement mode, secondary development output with APRS data.
Reference: DWM21031101
The SenseCAP LoRaWAN Air Temperature and Humidity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM17080701
AM2301 DHT21 Capacitive Digital Temperature & Humidity Sensor is wired with DHT21 or AM2301 sensors.
Reference: DWM18121801
SHT20+BMP280 High Precision Temperature Humidity and Barometer Sensor Module for weather station an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM18121802
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
Reference: DWM17080703
AM2321 is a temperature and humidity composite sensor that contains calibrated digital signal output, using special temperature and humidity sensor acquisition technology to ensure that products with high reliability and excellent long-term stability.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Low cost DWM-FC-28 Soil Humidity Detection Sensor Module can be used to detect soil moisture.