Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Low cost New Temperature and Relative Humidity Sensor DHT11 Module, Arduino adope Temperature and Humidity Sensor module.
100% brand new and high quality
DHT11 sensor adopts
The module can detect surrounding environment of the humidity and temperature.
High reliability and excellent long-term stability
Output form digital output
Has fixed bolt hole (3mm) and easy installation
Cables are free for you
Specification:
Humidity measurement range: 20%~90%RH
Humidity measurement error: ±5%RH
Temperature measurement range: 0~50°C
Temperature measurement error: ±2°C
Working voltage: DC5V/3.3V
Size: approx. 30x13x8mm (L*W*H)
Reference: DWM14060701
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM14101901
Crown YZW A123 lithium battery DIY essential 22AWG silicone wire balancing charge plug 2.54XH.
Reference: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Reference: DWM23051302
The LT-M9500 is air temperature and humidity, infrared CO2, and TVOC sensors are internally configured with MEMS specialized modules for measuring air temperature and humidity.
Reference: DWM17080701
AM2301 DHT21 Capacitive Digital Temperature & Humidity Sensor is wired with DHT21 or AM2301 sensors.
Reference: DWM23070203
LHT65N-E31F includes a built-in Temperature & Humidity sensor and has an external Sensirion SHT31F high accurancy Temperature & Humidity sensor probe is a Long Range LoRaWAN Sensor.
Reference: DWM18121801
SHT20+BMP280 High Precision Temperature Humidity and Barometer Sensor Module for weather station an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM17080704
MTH02 Digital Temperature & Humidity Sensor is Japan's Hokuriku resistive humidity sensor production as a Temperature & Humidity sensor.
Reference: DWM21031101
The SenseCAP LoRaWAN Air Temperature and Humidity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22092201
WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time which can work with WSC1-L or WSC2-LB weather station main processor.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM19090401
The Dragino LHT65 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor with an external sensor connector can be used for more than 10 years.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM14060701
The TH02 is a digital relative humidity and temperature sensor. This monolithic CMOS IC integrates temperature and humidity sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C host interface.
Reference: DWM14103102
DWM-DHT11 Digital Humidity Temperature Sensor for Arudino.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM14120304
DHT22 AM2302 Low cost Digital Temperature And Humidity Sensor Replace SHT11 SHT15.
Reference: DWM17080703
AM2321 is a temperature and humidity composite sensor that contains calibrated digital signal output, using special temperature and humidity sensor acquisition technology to ensure that products with high reliability and excellent long-term stability.
Reference: DWM18121802
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
Low cost New Temperature and Relative Humidity Sensor DHT11 Module, Arduino adope Temperature and Humidity Sensor module.
