Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
ESP32-A1S Wi-Fi+Bluetooth+Audio Development Kit it can work as a minimum independent system which offers support for Google’s Assistant and Amazon’s Alexa.
The core part of the ESP32 Audio Kit is ESP32- A1S module, it can work as a minimum independent system. Most audio interfaces are distributed on both sides of the development board for easy access, include 3.5mm headphone jack, 3.5mm line-in jack, a pair of 2-pin headers for left/right speakers (up to 4Ω/3W output), and a couple of built-in microphones. The ESP32-Audio-Kit is outfitted with a dual-core Xtensa LX6 CPU (520Kb SRAM, 8Mb of PSRAM), micro SD slot (up to 64Gb of storage), and 802.11 b/g/n Wi-Fi + Bluetooth 4.2 LE.
The ESP32-Audio-Kit is compatible with Espressif’s ESP-ADF framework, which offers support for Google’s Assistant and Amazon’s Alexa. It is an ideal solution for IOT Audio applications, it’s suitable for smart home devices, smart audio,etc.
Embedded LwIp and FreeRTOS.
Support Smart Config or Airkiss one-click network connection.
Support STA/ AP/ STA+AP working mode.
Charged by 5V/ 2A power supply and 3.7V lithium battery.
Support 64G SD card reading and writing.
Left and right channel speakers support output 4Ω 3W speaker output, and support dual channel output at the meantime.
Two analog microphones are used as audio input and headset microphone input respectively.
3.5 mm headphone jack supports left and right channel output.
CPU: Xtensa® 32-bit LX6 dual-core processor,Summary computing power up to 600 DMIPS
ROM: 520KB SRAM RTC 16 KB SRAM
IO Port: 10
SPI Flash: Default 32Mbit
RAM: 520KB SRAM+8M PSRAM
Support interface: URAT,SPI,I2C,PWM
UART Baudrate: Default 115200 bps
Audio Output: Support 1 channel headphone output and 1 channel left and right speaker output
Audio Input: Support LINEIN and 2-way MIC input
Spectrum range: 2412~2484MHz
WiFi 802.11: b/g/n/d/e/i/k/r (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4μs guard interval 2.4~2.5GHz
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards, NZIF receiver with -98 dBm sensitivity, support AFH (Adaptive Frequency Hopping), support CVSD and SBC audio formats
ESP32-A1S Wi-Fi+BT Audio Development Kit x 1
Reference: DWM15073002
DWM-ESP8266 ESP-05 DIP package Serial to WIFI wireless transceiver module with IPEX external antenna connector it's for Arduino,Raspberry Pi , AVR and ARM DK and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM17072503
ESP32S Wifi Bluetooth IOT wireless module which combined the WiFi 802.11b/g/n/e/i and Bluetooth v4.2 BR/EDR & BLE standard, providing a series of solutions of Wifi and Bluetooth to support open real-time operating systems (RTOS).
Reference: DWM17120403
0.96 OLED Display ESP32 WIFI Bluetooth Lora iot Development Board Transceiver SX1276 868MHZ 915MHZ IOT for Arduino Smart Home.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM17080703
AM2321 is a temperature and humidity composite sensor that contains calibrated digital signal output, using special temperature and humidity sensor acquisition technology to ensure that products with high reliability and excellent long-term stability.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM16121104
Easy Pulse Plugin is an Arduino compatible and breadboard friendly pulse sensor based on the principle of photoplethysmography.
Reference: DWM20030405
The RFM95W SX1276 LoRa IOT Development board for Raspberry Pi can be used in remote control, telemetry, remote communication equipment, robot control, wireless communications.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM16122102
NEO-6M-0-001 GPS Shield board is a cost-efficient and field-programmable gadget armed with a NEO-6M-0-001 and serial communication configuration.
Reference: DWM17080702
BMP180 Barometer Pressure /Temperature /Altitude Sensor is a low-cost sensing solution for measuring barometric pressure and temperature and altitude.
Reference: DWM24012302
The SunFounder Raspberry Pi Pico W Ultimate Starter Kit offers a rich IoT learning experience for beginners aged 8+. With 450+ components,117projects, and expert-led video lessons, this kit makes learning microcontroller programming and IoT engaging and accessible.
Reference: DWM17072501
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
Reference: DWM17080701
AM2301 DHT21 Capacitive Digital Temperature & Humidity Sensor is wired with DHT21 or AM2301 sensors.
Reference: DWM20030404
The DWM-32u4 with LoRa RFM95 IOT Board consists of the mega24u and the wireless transport module RFM95 is used in remote control, telemetry, remote communication equipment, robot control, wireless communications.
Reference: DWM17072502
D-duino is a combination of ESP8266 and OLED is a 6 IOT WiFi NodeMCU Development Board .
Reference: DWM20030406
The A9G development board is a multifunctional development board based on EMC’s A9G GPRS/ GSM + GPS/ BDS module it can be used Wireless Data Transmission and Positioning IOT Development.
Reference: DWM17080704
MTH02 Digital Temperature & Humidity Sensor is Japan's Hokuriku resistive humidity sensor production as a Temperature & Humidity sensor.
Reference: DWM17072503
ESP32S Wifi Bluetooth IOT wireless module which combined the WiFi 802.11b/g/n/e/i and Bluetooth v4.2 BR/EDR & BLE standard, providing a series of solutions of Wifi and Bluetooth to support open real-time operating systems (RTOS).
Reference: DWM16122005
This is a A6 GPRS/GSM Shield, which is use the newest A6 gprs/gsm module, A6 is a low-cost but efficient chip. With its ultra-small size, low power consumption and wide operating temperature range.
ESP32-A1S Wi-Fi+Bluetooth+Audio Development Kit it can work as a minimum independent system which offers support for Google’s Assistant and Amazon’s Alexa.
