Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
SenseCAP S2103 Wireless LoRaWAN CO2, Temperature, and Humidity Sensor for Outdoor&Indoor Air Quality, CO2 Meter, Carbon Emission.
This sensor detects CO2 together with air temperature and humidity to bring you the utmost convenience of monitoring invisible environmental parameters that are related to photosynthesis rate, and indoor/outdoor air quality to help our life and industrial production.
SenseCAP LoRaWAN S2103 CO2, Temperature, and Humidity Sensor satisfies industrial wireless long-distance data acquisition with a wide measuring range of 400 to 10000 ppm, -40°C to 85°C and 0 to 100% RH respectively. It enables low maintenance cost for its robustness, long battery usage, and built-in Bluetooth for OTA configuration and remote device management.
Wide measuring range: with a measuring range of 400-10000 ppm, the accuracy of 400 to 5000 ppm: ±(30+3%MV), and resolution of 1 ppm.
Industrial design: -40 ~ 85℃ operating temperature and IP66 rating, suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.
Bluetooth configuration in 1 min: scan the QR code on the device and finish the configuration work in just a few clicks
Easily get data, no clunky software interfaces: smooth data flow to cloud servers or other IoT data management platforms
Visualize data and monitor with SenseCAP Mate APP: you can set threshold value (just focus on the data you need to take action for), time intervals (improve the battery efficiency), and set alarms if data is out of the safe range.
LoRaWAN wireless transmission: ultra-low power consumption to support Max.10 years of battery life and ultra-wide-transmission range of 2km in urban scenes and 10km in line of sight scenes
Supported by Worldwide LoRaWAN Networks: can be used with different types of LoRaWAN gateways and compatible with multiple LoRaWAN Network Servers (Helium, TTN) to enable our sensor quickly join your current LoRaWAN networks
LoRaWAN network coverage is required when using sensors, there are two LoRaWAN network options.
Option 1: Sensors work in areas covered by Helium Network(Check on Helium Explore Map).
Option 2: Sensors work in a standard LoRaWAN network, like The Things Network, Loriot, Chirpstack, etc.
Poultry farm and livestock barn
Greenhouse
Indoor Air quality monitoring
Industrial CO2 emission
Specification
|
CO2 |
|
|
Range |
400 to 10000 ppm |
|
Accuracy |
400 to 5000 ppm: ±(30+3%MV) |
|
Resolution |
1 ppm |
|
Air Temperature |
|
|
Range |
-40 to +85 °C |
|
Accuracy |
±0.2 °C |
|
Resolution |
0.01 °C |
|
Long-term Drift |
<0.03 °C/year |
|
Air Humidity |
|
|
Range |
0 to 100 %RH |
|
Accuracy |
±1.8 %RH |
|
Resolution |
0.01 %RH |
|
Long-term Drift |
<0.25 %RH/year |
|
General Parameters |
|
|
Product Model |
S2103 |
|
Microcontroller |
Wio-E5 |
|
Support Protocol |
LoRaWAN v1.0.3 Class A |
|
Built-in Bluetooth |
App Tool to change parameters |
|
LoRaWAN Channel Plan |
IN865/EU868/US915/AU915/AS923/KR920/RU864 * |
|
Max Transmitted Power Sensitivity |
19dBm |
|
Sensitivity |
-136dBm@SF12 BW=125KHz |
|
Communication Distance |
2 to10km (depending on gateway antenna and environments) |
|
IP Rating |
IP66 |
|
Operating Temperature |
0 to +50 °C ( Effective measurement range of CO2) -40 to +85 °C (CO2 module not included) |
|
Operating Humidity |
0 to 90 % RH (non-condensing) |
|
Device Weight |
285g |
|
Certification |
CE / FCC / RoHS（Testing certification in progress） |
|
Battery (Contained in equipment) |
|
|
Battery Life |
Up to 10 years** |
|
Battery Capacity |
19Ah (non-rechargeable) |
|
Battery Type |
Standard D-size SOCl2 Battery |
* Every single device can support 7 frequency plans.
|
Sensor |
1 |
|
Bracket |
1 |
|
KA4*20mm Self-drilling Screw |
4 |
|
Waterproof gasket |
1 |
Reference: DWM20061501
The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22090703
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO.
Reference: DWM22090704
SenseCAP S2101- LoRaWAN Air Temperature and Humidity Sensor for Cold Chain and Warehouse is suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.
Reference: DWM21031103
SenseCAP IoT LoRaWAN Wireless Soil Moisture and Temperature Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090704
SenseCAP S2101- LoRaWAN Air Temperature and Humidity Sensor for Cold Chain and Warehouse is suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.
Reference: DWM23010805
SenseCAP S2110 LoRaWAN Sensor Kit include Temperature and Barometer Sensor, CO2 & Temperature & Humidity Sensor,Oxygen Sensor,Sunlight sensor,Light Sensor and Flame Sensor.
Reference: DWM21031104
SenseCAP IoT LoRaWAN Wireless Light Intensity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090801
SenseCAP S2104 - LoRaWAN Wireless Soil Moisture and Temperature Sensor can help in automatic irrigation systems, greenhouse control, fine agriculture, soil monitoring, and other scenarios.
Reference: DWM23010806
SenseCAP A1101 is a TinyML Edge AI enabled smart image sensor. It supports a variety of AI models such as image recognition, people counting, target detection, meter recoignition etc. It also supports training models with TensorFlow Lite.
Reference: DWM22090705
SenseCAP S2102 - LoRaWAN Light Intensity Sensor is built-in Bluetooth for OTA configuration and remote device management.
Reference: DWM21031102
SenseCAP LoRaWAN Wireless CO2 Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM21031101
The SenseCAP LoRaWAN Air Temperature and Humidity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090802
SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, rainfall, light intensity, UV index, and barometric pressure data supported by worldwide LoRaWAN networks.
Reference: DWM22090703
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO.
SenseCAP S2103 Wireless LoRaWAN CO2, Temperature, and Humidity Sensor for Outdoor&Indoor Air Quality, CO2 Meter, Carbon Emission.
