Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, rainfall, light intensity, UV index, and barometric pressure data supported by worldwide LoRaWAN networks.
SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, rainfall, light intensity, UV index, and barometric pressure data supported by worldwide LoRaWAN networks. The S2120 weather station is suitable for applications in gardens, agriculture, meteorology, urban environmental monitoring, and other scenarios. It also enables low maintenance cost for its ultra-low power consumption, reliable performance, and built-in Bluetooth for OTA configuration and remote device management.
Bluetooth Configuration in 1 min & Remote Management: finish the configuration work in just a few clicks, enable remotely monitor and manage real-time and historical data via the SenseCAP Mate App and SenseCAP Portal
Ultra-low Power Consumption, Easily Replaceable Battery & Expandable Capacity: powered by 0.5W solar panel and 3*standard 1.5V AA size dry batteries with up to 2 years service life (support external battery compartment with capacity for six batteries to double the service life)
Reliable Performance: suitable for outdoor harsh environments such as high UV exposure, heavy rain, dusty conditions, etc
One-stop Deployment & Flexible Layout: accessories include poles, mounting stand, etc. for quick installation and can be set up at almost any location
Customizable GPS function: we provide GPS function customized service by the WM-LR1110 module.
LoRaWAN network coverage is required when using sensors, there are two LoRaWAN network options.
Option 1: Sensors work in areas covered by Helium Network(Check on Helium Explore Map).
Option 2: Sensors work in a standard LoRaWAN network, like The Things Network, Loriot, Chirpstack, etc.
Backyard and Garden: Measure air temperature and humidity, rainfall, UV index, etc. in backyard and garden to protect your family.
Smart Agriculture：Enable farmers to obtain climate data and information in time, take scientific management measures into production, and improve agricultural production capacity and level.
Meteorology: Support applications in the professional meteorological field, for example, timely reflect the changes of various abnormal meteorological conditions in the field of traffic and transportation to provide real-time scientific basis data for traffic management departments.
Urban Weather: Provide real-time data for urban squares, parks, scenic spots, golf courses and other urban areas.
Specification
|
Air Temperature |
Rain Hourly |
||
|
Range |
-40.0 ~ 80.0 ℃ |
Range |
0 ~ 450 mm/h |
|
Accuracy |
±0.5℃ (0~80℃); ±0.6℃ (-40~0℃) |
Accuracy |
± 7% |
|
Resolution |
0.1℃ |
Resolution |
0.254 mm/h |
|
Air Humidity |
General Parameters |
||
|
Range |
1~99 %RH |
Product Model |
S2120 |
|
Accuracy |
±3% (1~90%RH); ±4% (90~99%RH) |
Microcontroller |
WM-LR1110 |
|
Resolution |
1%RH |
Support Protocol |
LoRaWAN v1.0.3 Class A |
|
Barometric Pressure |
Built-in Bluetooth |
App Tool to change parameters |
|
|
Range |
540 ~ 1100hPa |
LoRaWAN Channel Plan |
IN865/EU868/US915/AU915/ AS923/KR920/RU864 * |
|
Accuracy |
±5hPa(700~1100hPa); ±8hPa (540 ~ 699hPa) |
GPS |
Need to customize |
|
Resolution |
1hPa |
LoRaWAN Max Transmitted Power |
21dBm |
|
Wind Speed |
LoRa Sensitivity |
-141dBm@SF12 BW=125KHz |
|
|
Range |
0~50.0m/s |
Communication Distance |
2 to10km (depending on gateway antenna and environments) |
|
Accuracy |
±0.5m/s(<5m/s ); ±10% (> 5m/s) |
Protection grade |
Suitable for outdoor scenes |
|
Resolution |
0.1 m/s |
Operating Temperature |
-20 to +60 °C (Alkaline battery) -40 to +60 °C (Lithium battery) |
|
Wind Direction |
Operating Humidity |
0~99%RH |
|
|
Range |
0~360° |
Device Weight |
1.5kg |
|
Accuracy |
± 8° |
Certification |
CE / FCC / RoHS |
|
Resolution |
1° |
Power Supply |
|
|
Light Intensity |
Solar Panel
|
0.5W (When there is sunlight, solar panels will be used first, otherwise batteries will be used) |
|
|
Range |
0 ~ 200000 lux |
Battery Type** |
AA size, 1.5V batteries (alkaline or non-rechargeable Lithium battery) |
|
Accuracy |
± 5% |
Number of Battery |
Option1, built-in battery box: 3 * AA battery ; Option2, external battery box: 6 *AA battery |
|
Resolution |
1lux |
Battery Life |
2 years (Solar Panel + 6*AA Battery, 1h/uplink) |
|
UV Index |
External Battery Box |
Support 6 * AA 1.5V batteries Cable: 2m IP Rating: IPX6 |
|
|
Range |
0 ~ 16.0 |
* A device supports different frequencies and can be configured via the Bluetooth App. ** The battery life varies from data upload interval and distance between gateway.
|
|
|
Accuracy |
±10% | ||
|
Resolution |
0.1 |
||
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22090703
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO.
Reference: DWM22090704
SenseCAP S2101- LoRaWAN Air Temperature and Humidity Sensor for Cold Chain and Warehouse is suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.
Reference: DWM23010806
SenseCAP A1101 is a TinyML Edge AI enabled smart image sensor. It supports a variety of AI models such as image recognition, people counting, target detection, meter recoignition etc. It also supports training models with TensorFlow Lite.
Reference: DWM23010805
SenseCAP S2110 LoRaWAN Sensor Kit include Temperature and Barometer Sensor, CO2 & Temperature & Humidity Sensor,Oxygen Sensor,Sunlight sensor,Light Sensor and Flame Sensor.
Reference: DWM22090705
SenseCAP S2102 - LoRaWAN Light Intensity Sensor is built-in Bluetooth for OTA configuration and remote device management.
Reference: DWM22090801
SenseCAP S2104 - LoRaWAN Wireless Soil Moisture and Temperature Sensor can help in automatic irrigation systems, greenhouse control, fine agriculture, soil monitoring, and other scenarios.
Reference: DWM21031101
The SenseCAP LoRaWAN Air Temperature and Humidity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090703
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO.
Reference: DWM21031103
SenseCAP IoT LoRaWAN Wireless Soil Moisture and Temperature Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090704
SenseCAP S2101- LoRaWAN Air Temperature and Humidity Sensor for Cold Chain and Warehouse is suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.
Reference: DWM21031104
SenseCAP IoT LoRaWAN Wireless Light Intensity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090706
SenseCAP S2103 Wireless LoRaWAN CO2, Temperature, and Humidity Sensor for Outdoor&Indoor Air Quality, CO2 Meter, Carbon Emission.
Reference: DWM21031102
SenseCAP LoRaWAN Wireless CO2 Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, rainfall, light intensity, UV index, and barometric pressure data supported by worldwide LoRaWAN networks.
