The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO. It has a built-in battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collected over years. With Bluetooth 5.0 for easy configuration and firmware upgrade, It is also compatible with a wide range of frequencies(863MHz ~928MHz), different gateways, and LoRaWAN network servers.

Feature

Supporting a wide range of sensors: it can support 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/I2C/UART/RS485

LoRaWAN Wireless Transmission: ultra-low power consumption and ultra ultra-wide-distance transmission range. It has Max.10 years of battery life and can cover a transmission range of 2km in urban scenes and 10km in line of sight scenes

Industrial design: -40℃ ~ 85℃ operating temperature and IP66 rating, suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc. 

Over the Air Configuration in 1 min: scan the QR code on the device and just in a few clicks to choose the frequencies you want, all the configuration can be done via Bluetooth  

Easily get data, no clunky software interfaces: temperature and humidity data can smoothly be sent to your phone and cloud servers or other IoT data management platforms you’re using, 

Powerful supported SenseCAP APP: you can set threshold value (just focus on the data you need take action for), time intervals (improve the battery efficiency), and set alarms if data is out of the safe range.

Flexibly compatible with various LoRaWAN gateways: can be used with different types of LoRaWAN gateways and compatible with multiple LoRaWAN Network Servers (Helium, TTN) to enable our sensor quickly join in your current LoRaWAN networks 

Helium Network Architecture: make full advantage of the Helium coverage and various powerful IoT data management platforms on the Helium console

Note: if your area is covered by the Helium network, then you can directly use it by integrating the device in the network; if you don’t, you can buy SenseCAP M1/M2 to build your own Helium network  

Specifications

* Every single device can support 7 frequency plans.

Partlist