- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
SenseCAP S2110 LoRaWAN Sensor Kit include Temperature and Barometer Sensor, CO2 & Temperature & Humidity Sensor,Oxygen Sensor,Sunlight sensor,Light Sensor and Flame Sensor.
SenseCAP S2110 LoRaWAN® Sensor Kit is a cost-effective tool for developers to build outdoor sensors and applications and a custom open-source LoRa® device with low development cost.The combination of SenseCAP S2110 Grove to MODBUS RS485 Converter and SenseCAP S2100 LoRaWAN® Data Logger provides infinite possibilities for IoT developers to build customized industrial-level LoRaWAN sensors with Grove sensors at low cost.
This bundle kit includes SenseCAP S2100 LoRaWAN Data Logger, SenseCAP S2110 Grove to MODBUS RS485 Converter, and the six Grove Sensors which are already supported by the native firmware for you to choose to build ready-to-deploy SenseCAP LoRaWAN sensors without coding.
With this kit, you could easily upgrade the Grove Sensor that you selected to an industrial-level MODBUS RS485 LoRaWAN sensor with high robustness and outdoor deployment capability, and you could connect the sensor to the SenseCAP Cloud with a 5-minute setting in the SenseCAP Mate App via Bluetooth. IoT platforms such as Helium, TTN, LORIOT, etc are also supported.
the S2100 LoRaWAN® Data Logger serves as the converter to transform the sensors' signals into LoRa® wireless signals. When connecting to the SenseCAP S2110 Grove to MODBUS RS485 Converter, it transfers the data to SenseCAP Cloud after a simple 5-minute BLE configuration in SenseCAP Mate App. Precise data results and further analysis could be easily obtained from SenseCAP Dashboard and SenseCAP Mate App (Download the Mate APP here:1. iOS;2. Google Play;3. App Center).
The SenseCAP S2110 Grove to MODBUS RS485 Converter is the bridge that combines the Grove system and the SenseCAP LoRaWAN solution, which enables to upgrade a Grove sensor to an industrial-grade MODBUS RS485 sensor and take advantage of the SenseCAP LoRaWAN system. And it also makes up for the defects of insufficient sensor types and the high cost of existing outdoor sensors.
It has the dual-core ARM Cortex M0+ processor and has one Grove and one RS485 connector, enabling developers to connect with 500+ Grove sensors and various sensors support RS485 protocol and develop various IoT applications at low cost.
1. Temperature and Barometer Sensor (BMP280): Built a low-cost and high-precision outdoor LoRaWAN sensor that measures the temperature and barometer for meteorological monitoring IoT applications.
2.Oxygen Sensor(ME2-O2-Ф20): Build an outdoor LoRaWAN electrochemical oxygen sensor to test the oxygen concentration for air quality monitoring applications.
3.CO2 & Temperature & Humidity Sensor - SCD41: Build an outdoor LoRaWAN sensor to measure temperature, humidity, and CO2 at the same time for environmental monitoring IoT applications.
4.Sunlight sensor - SI1151: Build a multi-channel digital light outdoor LoRaWAN sensor to detect UV, visible light, and infrared light under a wide dynamic range and a variety of light sources including direct sunlight for ambient light monitoring IoT applications.
5.Light Sensor v1.2 - LS06-S phototransistor: Build a high-sensitive and reliable photodiode outdoor LoRaWAN sensor to detect the intensity of light for ambient light monitoring IoT applications.
6.Flame Sensor: Build an outdoor flame LoRaWAN sensor to detect fire sources or other wavelength light sources in the range of 760nm -1100 nm for fire alarm IoT applications.
1x SenseCAP S2100 - LoRaWAN® Data Logger, Supports RS485/Analog/GPIO Interfaces, LoRaWAN Converter
1x SenseCAP S2110 Grove to MODBUS RS485 Converter, an open-source tool to build RS485 sensors
1x Grove Temperature and Barometer Sensor (BMP280) - Supports I2C and SPI
1x Grove - CO2 & Temperature & Humidity Sensor - SCD41
1x Grove - Oxygen Sensor(ME2-O2-Ф20)
1x Grove - Sunlight sensor (UV-light, visible light and infrared light)-SI1151
1x Grove - Light Sensor v1.2 - LS06-S Phototransistor Compatible with Arduino
1x Grove - Flame Sensor, YG1006 sensor with high speed of 15 μS/cm & high sensitivity-ideal for Fire Alarm System
Get Started: Build LoRaWAN Sensors with SenseCAP S2110 Converter and SenseCAP Data Logger
GitHub: S2110 Converter source code
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22090802
SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, rainfall, light intensity, UV index, and barometric pressure data supported by worldwide LoRaWAN networks.
Reference: DWM22122903
The LoRaWAN Sensor Hub weather station is equipped with high-precision sensors that measure wind speed and direction, atmospheric pressure, humidity, and temperature. It is suitable for Smart Cities, Smart Farms, Smart Agricultural, environmental monitoring, and other use cases.
Reference: DWM21031101
The SenseCAP LoRaWAN Air Temperature and Humidity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090801
SenseCAP S2104 - LoRaWAN Wireless Soil Moisture and Temperature Sensor can help in automatic irrigation systems, greenhouse control, fine agriculture, soil monitoring, and other scenarios.
Reference: DWM22090703
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO.
Reference: DWM22090705
SenseCAP S2102 - LoRaWAN Light Intensity Sensor is built-in Bluetooth for OTA configuration and remote device management.
Reference: DWM21031103
SenseCAP IoT LoRaWAN Wireless Soil Moisture and Temperature Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090802
SenseCAP LoRaWAN S2120 Weather Station collects and uploads air temperature, humidity, wind speed/direction, rainfall, light intensity, UV index, and barometric pressure data supported by worldwide LoRaWAN networks.
Reference: DWM21031104
SenseCAP IoT LoRaWAN Wireless Light Intensity Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM23010806
SenseCAP A1101 is a TinyML Edge AI enabled smart image sensor. It supports a variety of AI models such as image recognition, people counting, target detection, meter recoignition etc. It also supports training models with TensorFlow Lite.
Reference: DWM21031102
SenseCAP LoRaWAN Wireless CO2 Sensor node built-in LoRa transmitter based on SX1276 chipset for smart agriculture, precision farming, and smart city outdoor used IoT application.
Reference: DWM22090704
SenseCAP S2101- LoRaWAN Air Temperature and Humidity Sensor for Cold Chain and Warehouse is suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.
Reference: DWM22090706
SenseCAP S2103 Wireless LoRaWAN CO2, Temperature, and Humidity Sensor for Outdoor&Indoor Air Quality, CO2 Meter, Carbon Emission.
SenseCAP S2110 LoRaWAN Sensor Kit include Temperature and Barometer Sensor, CO2 & Temperature & Humidity Sensor,Oxygen Sensor,Sunlight sensor,Light Sensor and Flame Sensor.