Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
The E72-2G4M05S1F is a multi-protocol,2.4G, SMD, wireless SoC module independently developed by Ebyte based on TI's CC2652RB. The transmit power is 5dBm. It integrates an ARM microcontroller and high-performance wireless transceiver. An integrated BAW (bulk acoustic wave) resonator is used to generate a radio frequency carrier, so no external 48MHz crystal is required. This module exposes all the IO ports of the microcontroller. It is equipped with a powerful 48MHz Arm® Cortex®-M4F processor, an internally integrated power amplifier, powerful peripherals and up to 26 GPIOs to enable multi-faceted development. The CC2652RB has the potential to be the best choice for wireless microcontrollers to realize smart home, IoT transition and industrial automation in the future. Since this is a SoC module, it needs to be programmed by the user before it can be used.
- Powerful 48MHz Arm® Cortex®-M4F processor
- Abundant resources, 352KB Flash, 80KB RAM
- Power supply 1.8-3.8V, performance best above 3.3V
- Transmit power 5dBm
- Communication range up to 350m with external antenna in ideal conditions
- Module contains external 32.768K low speed crystal oscillator
- Industrial grade standard design, supports long term use at -40 ~ 85°C
- 2 Pin cJTAG and JTAG debug
- Supports OTA
- Wireless protocols: Thread, Zigbee®, Bluetooth® 5 Low Energy
- Receiver sensitivity:-100dBm for 802.15.4 (2.4GHz), -102 dBm for Bluetooth 5 Low Energy coding
- Building automation solutions - Building security systems Motion detectors, electronic smart locks, door & window sensors, garage door systems, gateways HVAC thermostats, wireless sensors, HVAC system controllers, gateways Fire safety systems Smoke and temperature detectors, FACP Video surveillance IP cameras
- Elevators and escalators Elevator power supplies, elevator and escalator control panels
- Grid infrastructure - Smart meters - Water, gas, electricity meters and heat cost allocators - Grid communication - Wireless communication, remote sensor applications
- Industrial transportation - Asset tracking
- Factory automation and control
- Medical
- Electronic point of sale (EPOS) - Electronic shelf labels (ESL)
| No. | Item | Direction | Description |
| 1 | DIO 3 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 2 | DIO 4 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 3 | DIO 5 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 4 | DIO 6 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 5 | DIO 7 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 6 | DIO 8 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 7 | DIO 12 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 8 | DIO 13 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 9 | DIO 14 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 10 | DIO 9 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 11 | DIO 10 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 12 | DIO 11 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 13 | DIO 15 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 14 | JTAG TMSC | Input/Output | JTAG TMSC _ |
| 15 | JTAG TCKC | Input | JTAG TCKC _ |
| 16 | DIO 16 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 17 | DIO 17 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 18 | DIO 18 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 19 | DIO 19 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 20 | DIO 20 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 21 | DIO 21 | Input/Output | Ground, connected to the power reference ground |
| 22 | GND | Ground, connected to the power reference ground | |
| 23 | VCC | Power supply positive,1.8V-3.6V | |
| 24 | DIO 22 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 25 | RESET N | Input | Reset, active low (see CC2652RB1FRGZ manual for details) |
| 26 | DIO 23 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 27 | DIO 24 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 28 | DIO 25 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 29 | DIO 26 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 30 | DIO 27 | Input/Output | Configurable general IO port (see CC2652RBIFRGZ manual for details) |
| 31 | DIO 28 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 32 | DIO 29 | Input/Output | Configurable general IO port(see CC2652RB1FRGZ manual for details) |
| 33 | DIO 30 |
Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
| 34 | X48M-N |
48-MHz crystal oscillator pin 1(see CC2652RB1FRGZ manual for details) |
|
35 |
X48M-P |
48-MHz crystal oscillator pin 2(see CC2652RB1FRGZ manual for details) |
|
36 |
DIO 2 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
37 |
DIO 1 | Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
38 |
DIO 0 |
Input/Output | Configurable general IO port (see CC2652RB1FRGZ manual for details) |
Reference: DWM16040601
DWM-RTC1101 is built by the IT RF chipset CC1101 which max power output is +10dBm have three versions 433MHz, Free band SRD Wireless Transceiver Module.
Reference: DWM21032105
DWM-N620 TI CC1310(or CC1312R,CC1312R7)+CC1190 868MHz /915MHz 27dBm Enhance power SOC RF Transceiver module design consists of a SOC chip and CC1190 PALAN RF chip.
Reference: DWM23030801
DWM-N503AS radio module based TI CC1101 transceiver chip designed for 433M, 868M and 915MHz. Up to 12dBm output power and down to -116dBm sensitivity. The module supports Ardunio and WMBUS.
Reference: DWM23072501
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
Reference: DWM23072402
The E70 series modules is an RF SoC module based on the TI CC1310 chip. It is a dual-band ARM RF SoC module with a maximum transmission power of 10dBm at sub-1GHz.
Reference: DWM23072602
E72-2G4M23S1A is small SMD Cortex-M3 Zigbee and 6LoWPAN wireless module built-in with TI SoC CC2630 working at 2.402～2.480GHz, with 23dB maximum power and PCB antenna&IPEX interface. It has super low RF & MCU current and low power consumption.
Reference: DWM17080801
DWM-VT-CC1120 433MHz /868MHz /915MHz Narrow-Band TI CC1120 wireless Transceiver module is based TI Chipcon RF Transceiver CC1120，it’s a small size and ultra low power UHF wireless module.
Reference: DWM24022001
DWM-N515-24 design consists of a CC1120 low-power, integrated sub 1G transceiver RF chip all operational power is derived from a single supply voltage and the max output power is +24dbm(at +3.3V),+27dbm(at +5V).
Reference: DWM16041401
DWM-RTC1101 is the Small Size(17x11x2.1mm) which built by the TI RF chipset CC1101 which max power output is +10dBm have three versions 433MHz Free band SRD Wireless Transceiver Module.
Reference: DWM21032105
DWM-N620 TI CC1310(or CC1312R,CC1312R7)+CC1190 868MHz /915MHz 27dBm Enhance power SOC RF Transceiver module design consists of a SOC chip and CC1190 PALAN RF chip.
Reference: DWM21032106
DWM-N532 TI CC1310(or CC1312R, CC1312R7) 30dBm 433MHz /868MHz /915MHz Enhance power SOC RF Transceiver module design consists of a SOC chip with a 10 -10000 meters wireless transmission.
Reference: DWM18122801
DWM-HC210C CC115L 315MHz /433MHz /868MHz /915MHz Small size Transmitter rf module is a low-cost sub-1 GHz transmitter designed for very low-power wireless appli-cations base on the TI CC115L RF chipset.
Reference: DWM16040601
DWM-RTC1101 is built by the IT RF chipset CC1101 which max power output is +10dBm have three versions 433MHz, Free band SRD Wireless Transceiver Module.
Reference: DWM23072603
E72-2G4M05S1A is small SMD Cortex-M3 Zigbee and 6LoWPAN wireless module built-in with TI SoC CC2630 working at 2.402～2.480GHz, with 5dBm maximum power and PCB antenna&IPEX interface. It has super low RF & MCU current and low power consumption.
Reference: DWM21032104
DWM-N530 TI CC1310 433MHz /868MHz /915MHz SPI SOC RF Transceiver module design consists of a CC1310 RF chip.
Reference: DWM23072501
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
Reference: DWM16042901
This is New coming RF module base on the TI rf chipet CC1101 we build it as DIP package and support ISM free Band 315MHz,433MHz,868MHz and 915MHz and SDR wilreless transceiver module.
Reference: DWM14061801
DWM-UTC4432 Series transparent data link module with high power output like 1W and even 2W.
Reference: DWM21032101
DWM-N511 TI CC1120 170MHz /433MHz /868MHz /915MHz Narrowband Transceiver rf module design consists of a CC1120, low-power, integrated sub 1G transceiver RF chip with 2000 meters long range wireless transmission.
Reference: DWM23072701
CC2640R2L UART to BLE Slave Module is a serial port to BLE Bluetooth slave node module that supports Bluetooth protocol version 5.0. It is small in size and low in power consumption. It works in the 2.4GHz frequency band.
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
