The DWM-HC210C is a low-cost sub-1 GHz transmitter designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD(Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-348 MHz, 387-464 MHz and 779-928MHz bands.
Suited for systems targeting compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US).
Suited for systems targeting compliance with the Wireless MBUS standard EN 13757-4:2005
Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols.
Applications :
• Ultra low-power wireless applications
operating in the 315/433/868/915 MHz
ISM/SRD bands
• Wireless alarm and security systems
• Industrial monitoring and control
• Wireless sensor networks
• AMR – Automatic Meter Reading
• Home and building automation
• Wireless MBUS
PIN Description
Pin Name |
Pin type |
Description |
SI |
Digit Input |
Serial configuration interface, data input |
SCLK |
Digit Input |
Serial configuration interface, clock input |
SO(GDO1) |
Digit Output |
Serial configuration interface, data output Optional general output pin when CSn is high |
GDO2 |
Digit Output |
Digital output pin for general use: • Test signals • FIFO status signals • Clock output, down-divided from XOSC • Serial output RX data |
GDO0 |
Digit Output |
Digital output pin for general use: • Test signals • FIFO status signals • Clock output, down-divided from XOSC • Serial output RX data |
SCN |
Digit Input |
Serial configuration interface, chip select |
GND |
Ground |
Module ground. |
VDD |
Power Supply |
1.8-3.6V power supply for module |
ANT |
Digit Input |
Module Antenna terminal, Default terminal |
GND |
Ground |
Module ground. |
Apprication
Dimension