Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The E79 is an RF SoC module based on the TI CC1352P chip. It is a dual-band ARM RF SoC module with a maximum transmission power of 20dBm at sub-1GHz and 5dBm at 2.4GHz.
The E79 is an RF SoC module based on the TI CC1352P chip. It is a dual-band ARM RF SoC module with a maximum transmission power of 20dBm at sub-1GHz and 5dBm at 2.4GHz. This module integrates a high-performance radio transceiver and a low-temperature drift industrial crystal oscillator. It exposes all the IO interfaces of the microcontroller and integrates a powerful 48MHz Arm® Cortex®-M4F processor, high-performance power amplifier, powerful peripherals, and up to 26 GPIOs for versatile development. The module can be developed for many application fields including smart home, IoT upgrade, industrial automation, etc. It is an excellent choice for wireless microcontrollers. This module is a hardware platform and cannot be used directly. Users need to carry out secondary development.
- Built-in high-performance low-power Arm® Cortex®-M4F processor, clock speed up to 48MHz
- Abundant resources, 352KB flash, 80KB RAM
- Power supply voltage 2.1～3.8V, performance best at ≥3.3V
- Max transmit power 20dBm@SUB-1GHz/5dBm@2.4GHz, adjustable via software
- Communication range up to 1.5km@SUB-1GHz/120m@2.4G in ideal conditions
- Module contains 48MHz high speed crystal/32.768k low speed crystal
- Industrial grade standard design, supports long term use at -40-+85°C
- Dual antenna optional (IPEX/stamp hole), users can choose based on needs
-2 pin cJTAG and JTAG debug
- Wireless upgrade (OTA)
- Dual band 1GHz and 2.4GHz RF transceiver, compatible with Bluetooth 5 and IEEE 802.15.4 PHY and MAC standards
- Excellent receiver sensitivity:-122dBm (simple long range),-110dBm (50kbps),-103dBm (low power Bluetooth 5 coding)
- Smart grid and automatic meter reading - water, gas and electricity meters - gateways
- Wireless sensor networks - remote sensor security systems, positioning systems
- Industrial - asset tracking and management - factory automation - remote displays
- Wireless healthcare applications
- Energy harvesting applications
- Electronic shelf labels (ESL)
- Home and building automation - wireless alarms and security systems - safety locks - lighting control - motion detectors - home appliances - HVAC - garage door openers
- Wireless remote control, drones
| No. | Name | Type | Functions | |
| 1 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 2 | ANT | Input/Output | Antenna interface, stamp hole (50 ohm characteristic impedance) | |
| 3 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 4 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 5 | DIO 7 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 6 | DIO 8 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 7 | DIO 9 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 8 | DIO 10 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 9 | DIO 11 | Input/Output | Configurable universal IO Port (see CC1352P1F3RGZ Manual) | |
| 10 | DIO 12 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 11 | DIO 13 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 12 | DIO 14 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 13 | DIO 15 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 14 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 15 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 16 | JTAG TMSC | Input/Output | JTAG TMSC | |
| 17 | JTAG TCKC | Input | JTAG TCKC | |
| 18 | DIO 16 | Input/Output | Configurable universal IO,JYAG Port(see CC1352P1F3RGZ Manual) | |
| 19 | DIO 17 | Input/Output | Configurable universal IO,JYAG Port(see CC1352P1F3RGZ Manual) | |
| 20 | DIO 18 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 21 | DIO 19 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 22 | DIO 20 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 23 | DIO 21 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 24 | DIO 22 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 25 | RESET N | Input | Reset Pin | |
| 26 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 27 | GND | Input/Output | Ground wire, connected to the power reference ground | |
| 28 | DIO 23 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 29 | DIO 28 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 30 | DIO 27 | Input/Output | Configurable universal IO Port (see CC1352P1F3RGZ Manual) | |
| 31 | DIO 24 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 32 | DIO 25 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 33 | DIO 26 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 34 | DIO 29 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 35 | DIO 30 | Input/Output | Configurable universal IO Port(see CC1352P1F3RGZ Manual) | |
| 36 | VCC | Input/Output | Module power supply positive reference voltage, voltage range 1.8～3.8V | |
| 37 | GND | Input/Output | Ground wire, connected to the power reference ground | |
Reference: DWM16040601
DWM-RTC1101 is built by the IT RF chipset CC1101 which max power output is +10dBm have three versions 433MHz, Free band SRD Wireless Transceiver Module.
Reference: DWM21032102
DWM-N513 TI CC1120 24dBm enhance power output 433MHz /868MHz /915MHz Narrowband Transceiver rf module design consists of a CC1120 sub 1G transceiver RF chip.
Reference: DWM21032105
DWM-N620 TI CC1310(or CC1312R,CC1312R7)+CC1190 868MHz /915MHz 27dBm Enhance power SOC RF Transceiver module design consists of a SOC chip and CC1190 PALAN RF chip.
Reference: DWM23030801
DWM-N503AS radio module based TI CC1101 transceiver chip designed for 433M, 868M and 915MHz. Up to 12dBm output power and down to -116dBm sensitivity. The module supports Ardunio and WMBUS.
Reference: DWM24022001
DWM-N515-24 design consists of a CC1120 low-power, integrated sub 1G transceiver RF chip all operational power is derived from a single supply voltage and the max output power is +24dbm(at +3.3V),+27dbm(at +5V).
Reference: DWM17072801
This is New coming RF module base on the TI rf chipet CC1101 we build it as DIP package and support ISM free Band 315MHz,433MHz,868MHz and 915MHz and SDR wilreless transceiver module.
Reference: DWM17080901
DWM-S02C-CC1310 433MHz /868MHz /915MHz TI CC1310 Ultra-Low Power Long Range wireless Transceiver module is base on the SoC chip CC1310 of Texas Instruments design. It integrated with a high performance RF core, an ARM®Cortex® -M3 controller and a high performance amplifier.
Reference: DWM21032105
DWM-N620 TI CC1310(or CC1312R,CC1312R7)+CC1190 868MHz /915MHz 27dBm Enhance power SOC RF Transceiver module design consists of a SOC chip and CC1190 PALAN RF chip.
Reference: DWM23072503
E72-2G4M02S2B is a small-size SMD RF module BLE Bluetooth wireless module independently developed based on CC2640 produced by Texas Instruments (TI)。CC2640 chip integrates 128KB intra-system programmable flash and 8KB buffer static RAM (SRAM) and different 2.4GHz wireless communication protocols
Reference: DWM23072504
The E72-2G4M20S1E is a multi-protocol 2.4GHz SMD wireless SoC module independently developed by Ebyte based on TI's CC2652P. The transmit power is 20dBm. It integrates an ARM microcontroller and high-performance wireless transceiver.
Reference: DWM21032104
DWM-N530 TI CC1310 433MHz /868MHz /915MHz SPI SOC RF Transceiver module design consists of a CC1310 RF chip.
Reference: DWM23072501
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
Reference: DWM21032102
DWM-N513 TI CC1120 24dBm enhance power output 433MHz /868MHz /915MHz Narrowband Transceiver rf module design consists of a CC1120 sub 1G transceiver RF chip.
Reference: DWM23072701
CC2640R2L UART to BLE Slave Module is a serial port to BLE Bluetooth slave node module that supports Bluetooth protocol version 5.0. It is small in size and low in power consumption. It works in the 2.4GHz frequency band.
Reference: DWM21032101
DWM-N511 TI CC1120 170MHz /433MHz /868MHz /915MHz Narrowband Transceiver rf module design consists of a CC1120, low-power, integrated sub 1G transceiver RF chip with 2000 meters long range wireless transmission.
Reference: DWM23072602
E72-2G4M23S1A is small SMD Cortex-M3 Zigbee and 6LoWPAN wireless module built-in with TI SoC CC2630 working at 2.402～2.480GHz, with 23dB maximum power and PCB antenna&IPEX interface. It has super low RF & MCU current and low power consumption.
Reference: DWM21032103
DWM-N516 TI CC1120 CC1190 27dBm 868MHz /915MHz SPI Narrowband Transceiver rf module design consists of a CC1120 and CC1190 sub 1G transceiver RF chip.
Reference: DWM23072402
The E70 series modules is an RF SoC module based on the TI CC1310 chip. It is a dual-band ARM RF SoC module with a maximum transmission power of 10dBm at sub-1GHz.
Reference: DWM21032106
DWM-N532 TI CC1310(or CC1312R, CC1312R7) 30dBm 433MHz /868MHz /915MHz Enhance power SOC RF Transceiver module design consists of a SOC chip with a 10 -10000 meters wireless transmission.
Reference: DWM16040601
DWM-RTC1101 is built by the IT RF chipset CC1101 which max power output is +10dBm have three versions 433MHz, Free band SRD Wireless Transceiver Module.
The E79 is an RF SoC module based on the TI CC1352P chip. It is a dual-band ARM RF SoC module with a maximum transmission power of 20dBm at sub-1GHz and 5dBm at 2.4GHz.
