Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
PCIE-M.2 WiFi6 AX210N Module for WLAN/ Bluetooth, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board MiniPCIe Slot #3.
The Intel Wi-Fi 6e AX210 adapter is designed to support the upcoming IEEE 802.11 ax standard, Wi-Fi 6e technology, and the Wi-Fi Alliance Wi-Fi 6e certification. The product supports 2x2 Wi-Fi 6 technology, delivering data rates of up to 2.4 Gbps and increased network capacity as well as Bluetooth 5.2 support. These new features provide a significant improvement, supporting fast uploads and downloads, lower latency, and longer battery life compared to solutions supporting 802.11ac.
Model: Wi-Fi 6E AX210
Interface: M.2 A+E (includes an adapter to mini PCIe)
Dual band: 2.4 GHz, 5 GHz, and 6 GHz (160MHz)
Speed up to 2400Mbps (the router should support 160 MHz channels- 802.11ax)
Support Bluetooth 5.2
The RAK7391 supports Wi-Fi 6 modules via the mPCIe interface. The OS image includes pre-installed firmware and drivers for several Intel Wi-Fi 6 card models, such as the AX200, AX201, and AX210. For instance, the WiFi6E Intel AX210 module has been tested and works as a Plug & Play device when connected to MiniPCIe #3 on the RAK7391.
In RAKPiOS, the wireless interface name for the module should be wlan1. To connect to a Wi-Fi 6 hotspot, follow the same procedure as for Wi-Fi 5, but update the interface name from wlan0 to wlan1 in the configuration.
Reference: DWM21040701
DWM-RAK2287 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1302, the module comes with a ZOE-M8Q GPS chip, in order to provide GNSS functionality.
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM24081401
RAK7391 IOT LoRaWAN Gateway Carrier Board with a RAK5146 LPWAN Concentrator module adapted Raspberry Pi CM4 is a great board to build your solution, whether a gateway, edge device, or a general-purpose computer!
Reference: DWM24092501
RAK8213 is a multi-band LTE Cat M1/Cat NB1/EGPRS module based on the Quectel EG95 with a standard PCI Express® form factor (Mini PCIe). It offers a maximum data rate of 375 Kbps downlink and 375 Kbps uplink.
Reference: DWM22121401
RAK7244 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4 / D4+ / D4P RAK7244 / RAK7244C / RAK7244P.
Reference: DWM23072801
RAK2270 is a sleek sticker tracker for LoRaWAN® designed like a label, making it easy to attach to any product. It offers real-time location tracking through the Helium network server's advanced features.
Reference: DWM25062602
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device based on LTE Cat NB1 (NB-IoT) wireless communication monitoring parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
Reference: DWM23080408
RAK Industrial IO and Communication Kit with RAK13101 GSM module Quectel MC20CE which is including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control.
Reference: DWM19022001
DWM-RAK7249 is The Enterprise DIY outdoor LoRaWan GATEWAY Builtin OpenWRT OS support 16 channel LoRa/4G/WIFI/GPS .
Reference: DWM23080602
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
Reference: DWM20060102
Brand: Semtech
DWM-RAK4200 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.it's utilized is of an Xbee form factor.
Reference: DWM23051902
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
Reference: DWM20061601
Brand: Semtech
The RAK7246 is a LoRaWAN® developer gateway is the model without the GPS function. It is a device composed of a the RAK2246 Pi HAT LPWAN Concentrator module and Raspberry Pi Zero W.
Reference: DWM23080607
The Smart Home Office Security Kit with RAK13101 GSM module Quectel MC20CE includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM22082503
RAK11300 is based on the Raspberry Pi RP2040 chip and SX1262 RF transceiver it's complies with Class A & C of LoRaWAN 1.0.2 specifications.
Reference: DWM23080608
The LoRaWAN Smart Home Office Security Kit includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM23080507
The IOT Movement Detection Kit with RAK5860 NB-IOT module Quectel BG77 this kit includes a variety of contact and non-contact motion sensors, including an accelerometer, gyroscope, PIR (Passive Infrared) sensor, and radar sensor.
Reference: DWM23010803
RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM18042701
LoRa Antenna-433MHz /470MHz /868MHz /915MHz 8dBi Glass Fiber Antenna with N Female Connector. Out Door Waterproof Fiberglass Antenna which is designed for Lora application required for high gain outdoor waterproof.
Reference: DWM23080506
Light and Color Kit includes RGB, visible, and UV light sensors, as well as LED bar and RGB modules, providing a versatile platform for measuring and controlling light and color in a wide range of applications.
PCIE-M.2 WiFi6 AX210N Module for WLAN/ Bluetooth, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board MiniPCIe Slot #3.
