Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device based on LTE Cat NB1 (NB-IoT) wireless communication monitoring parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device designed to create a healthy, safe, and comfortable indoor environment. LTE Cat NB1 (NB-IoT) wireless communication technology provides reliable, wide-area, low-power monitoring of key air quality parameters to help individuals and organizations maintain optimal indoor air quality, promoting health, well-being, and productivity.
Multi-Parameter Real-Time Monitoring
The sensor monitors a comprehensive set of environmental parameters with the following ranges and precision:
| Parameter | Range | Precision | Description |
|---|---|---|---|
| PM1.0, PM2.5, PM10 | 0 µg/m³ – 2000 µg/m³ | ±10% | Measures particulate matter of different sizes, critical for respiratory health. |
| CO2 | 400 ppm – 5,000 ppm | ±30 ppm | Indicates ventilation quality and occupant density. High levels may impair cognition. |
| TVOC | 0 – 60,000 ppb | ±15% | Measures total volatile organic compounds, common indoor pollutants. |
| Temperature | -20°C – 60°C | ±0.6°C (-20°C to -10°C) ±0.4°C (-10°C to 5°C) ±0.2°C (5°C to 60°C) |
Monitors ambient temperature for comfort and safety. |
| Humidity | 10% – 100% RH | ±4% (10-20% RH) ±2% (20-80% RH) ±4% (80-100% RH) |
Tracks relative humidity to maintain healthy indoor moisture levels. |
The LRS10701-CPV0 uses LTE Cat NB1 (Narrowband IoT) technology, providing:
Wide-area coverage with low power consumption.
Frequency bands supported: B1, B3, B5, B8, B20.
Transmit power: 23 dBm.
Receiver sensitivity: -116 dBm.
Power Supply and Battery Life
Powered by 2 x 3.6V C size ER26500 batteries or DC power (8.5-15V DC, max 1A), the device supports:
Up to 3 years of battery life under typical usage.
Measurement intervals are configurable, typically every 15 minutes (battery powered) or every 5 minutes (DC powered).
Data upload intervals (heartbeat) every 60 minutes (battery powered) or every 5 minutes (DC powered).
Features a color LED bar that visually represents the current air quality level, allowing quick and easy assessment at a glance.
Configurable Settings
Allows customization of measurement intervals and alarm thresholds to suit different environments and user preferences.
Designed to meet WELL Building Standard v2.2 requirements, supporting buildings aiming to promote occupant health and well-being through superior indoor air quality management.
| Specification | Details |
|---|---|
| Wireless Connectivity | LTE Cat NB1 (NB-IoT) |
| Frequency Bands | B1, B3, B5, B8, B20 |
| Transmit Power | 23 dBm |
| Receiver Sensitivity | -116 dBm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Storage Humidity | 10% to 95% RH |
| Dimensions (LxWxH) | 119 x 119 x 37.5 mm |
| Weight | Approx. 175 g (excluding battery/DC power) |
| Installation | Wall mounting bracket |
| Antenna Type | Internal antenna |
| Power Supply | 2 x 3.6V C size ER26500 batteries or 8.5-15V DC power adapter |
| Battery Life | Up to 3 years (typical) |
| Measurement Interval | Battery: every 15 mins DC Power: every 5 mins |
| Data Upload Interval | Battery: every 60 mins DC Power: every 5 mins |
1. Health and Safety in New Buildings and Renovations
Ideal for monitoring particulate matter, CO2, and TVOC levels in newly constructed or renovated spaces, ensuring air quality remains safe during critical initial occupancy periods. Suitable for homes, schools, daycare centers, and healthcare facilities.
2. Smart Office Air Quality Monitoring and Management
Enables continuous monitoring of key air quality parameters to optimize workplace environments, enhancing occupant comfort, reducing health risks, and improving productivity.
3. Smart Classroom Air Quality Monitoring
Supports educational institutions by maintaining optimal air quality through real-time monitoring and integration with ventilation and climate control systems, fostering healthier and more productive learning environments.
1x LRS10701-CPV0 Environmental Sensor
1x Wall Mounting Kit
Reference: DWM21072702
The N95S31B SHT31 NB-IoT Outdoor Temperature and Humidity Sensor be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: DWM22092802
WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time by RS485 interface to WSC1-L which can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.
Reference: DWM22101701
DWM-M702 seven-in-one sensor module is a cost-effective digital serial port output sensor module, which adopts 485/UART output mode and integrates CO2, HCHO, TVOC,PM2.5,PM10, temperature and humidity.
Reference: DWM25062601
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device. The sensor monitors parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
Reference: DWM23010803
RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM19030101
DWM-RAK7243 Pilot Gateway Pro Kit with Cellular & GPS modules for PoC Raspberry Pi 3B+, RAK2245 Pi HAT,RAK2013 Cellular Pi HAT.
Reference: DWM23080606
The Smart Home Office Security Kit with RAK5860 NB-IOT module Quectel BG77 includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM23080402
Indoor Location Tracker Kit with LoRaWAN, The Kit is providing all components to build a UWB based indoor tracking and location system .It includes motion sensors and four UWB modules.
Reference: DWM24012601
The Meshtastic starter Kit includes a WisBlock Base board and the RAK4631 WisBlock Core module, already flashed with the Meshtastic firmware. Power the boards up and start sending messages immediately.
Reference: DWM22082903
RAK7289 WisGate Edge Pro is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM20053104
Brand: Semtech
DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing.
Reference: DWM24011501
The Raspberry Pi 4 LoRaWAN Kit is Based on RAK2287 Concentrator and Raspberry Pi 4 Model B use it to Build your developer gateway for LoRaWAN application.
Reference: DWM22082502
RAK5146 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1303 and SX126X for Listen Before Talk feature, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.
Reference: DWM22121301
RAK7248 Raspberry Pi 4 option RAM for 2G,4G and 8G Based LoRaWAN Gateway RAK WisGate Developer D4H/D4H+/D4HP RAK7248/RAK7248P/RAK7248C.
Reference: DWM22123003
RAK9003 PoE Pi HAT can power the RPi 3B+ and RPi 4 directly through your gateway's Ethernet port. suitable for deployments utilizing cabled network connectivity.
Reference: DWM23010804
RAK7434 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 0-5V signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM20053102
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM23100902
RAK7289V2 WisGate Edge Pro Version 2 is an ideal product for IoT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability.Supports 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23080602
IOT Smart Biometric Monitoring Kit with RAK13101 GSM module Quectel MC20CE includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes.
Reference: DWM23080609
The IOT Smart Industry 4.0 Kit with RAK5860 NB-IOT module Quectel BG77 includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device based on LTE Cat NB1 (NB-IoT) wireless communication monitoring parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
