Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RAK2171 is RAK latest LoRaWAN GPS tracking device. It comes in a small form factor with rechargeable battery and tracking and configuration application, available for iOS and Android devices.
RAK2171 supports multiple working modes and notification options. When used with RAK WisGate Edge gateways and in P2P mode you can monitor your tracker on the application map, create geofences, and receive SOS and movement notifications. You can also configure the WisNode TrackIt to work with any third-party LoRaWAN network using the TrackIt application as a configuration tool.
Built-in LoRaWAN, Bluetooth, and GPS
Built-in battery:400mAh
Charger with a magnetic plate
Tracker Dimensions: 42x42x18 mm
Tracker weight:25g
Built-in accelerometer
Operating temperature:-20° C to +60° C
Android and iOS application for easy management, configuration, and location tracking
IP65
1pcs Tracker
1pcs protective silicone cases
1pcs charging cables
Reference: DWM22061601
RAK10700 is a GNSS Tracker device with a GNSS modem providing LPWAN and BLE communication using the nRF52 MCU and SX1262 LoRa transceiver of the RAK4631 Core module.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22091301
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: DWM23010601
LW004-PB Support LoRaWAN GPS and BLE RFID IOT Tracker has built in RFID and 3-axis accelerometer sensor. It can be used to employee attendance, access control, identity identification and motion detection.
Reference: DWM23080610
The IOT Smart Industry 4.0 Kit with RAK13101 GSM module Quectel MC20CE includes a range of sensors, including inductive, proximity, fork, and current/coulomb sensors, as well as interfaces commonly used in industrial environments, such as relays, joysticks, and barcode scanners.
Reference: DWM20053101
Brand: Semtech
DWM-RAK4200 LPWAN Module includes an STM32L071 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 1.5uA in sleep mode and high LoRa® output power up to 19dBm max in work mode.
Reference: DWM23010803
RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM23010804
RAK7434 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 0-5V signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM23080607
The Smart Home Office Security Kit with RAK13101 GSM module Quectel MC20CE includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM23080608
The LoRaWAN Smart Home Office Security Kit includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM20092101
DWM-RAK7240 8 channels OpenWRT OS DIY Enterprise LoRa Gateway Builtin OpenWRT OS support 8 channels LoRa/4G/WIFI/GPS .
Reference: DWM24021301
RAK7240V2 is an IP65 Outdoor LoRaWAN Gateway It is based on the latest SX1303 LoRa core that supports multi-backhaul with Ethernet, Wi-Fi, and Cellular connectivity.
Reference: DWM23080606
The Smart Home Office Security Kit with RAK5860 NB-IOT module Quectel BG77 includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM22022502
RAK2287 /RAK5146 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2287 and RAK5146 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM20053001
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM22122905
The LoRaWANenvironmental monitoring and moving detection solution includes a combination of the Temperature and Humidity Sensor and the 3-axis Acceleration Sensor inside the Sensor Probe.
Reference: DWM23080409
RAK Industrial IO and Communication Kit with RAK13800 Enthernet Module with WIZnet W5100S-L chip which is including LIN, CAN, SDI-12, 4-20 mA, RS485, Ethernet, Analog, and Relay for data acquisition and control.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM23080605
IoT Starter Kit with RAK13101 GSM module Quectel MC20CE including LoRaWAN, BLE, LTE-M/NB-IoT, and a range of different modules, including temperature/humidity, accelerometer, barometer, ambient light, and GPS. It also supports multiple outputs such as a buzzer, RGB LED, and I2C OLED.
Reference: DWM18011801
DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.
