Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RAK2171 is RAK latest LoRaWAN GPS tracking device. It comes in a small form factor with rechargeable battery and tracking and configuration application, available for iOS and Android devices.
RAK2171 supports multiple working modes and notification options. When used with RAK WisGate Edge gateways and in P2P mode you can monitor your tracker on the application map, create geofences, and receive SOS and movement notifications. You can also configure the WisNode TrackIt to work with any third-party LoRaWAN network using the TrackIt application as a configuration tool.
Built-in LoRaWAN, Bluetooth, and GPS
Built-in battery:400mAh
Charger with a magnetic plate
Tracker Dimensions: 42x42x18 mm
Tracker weight:25g
Built-in accelerometer
Operating temperature:-20° C to +60° C
Android and iOS application for easy management, configuration, and location tracking
IP65
1pcs Tracker
1pcs protective silicone cases
1pcs charging cables
Reference: DWM22061601
RAK10700 is a GNSS Tracker device with a GNSS modem providing LPWAN and BLE communication using the nRF52 MCU and SX1262 LoRa transceiver of the RAK4631 Core module.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22091301
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: DWM23010601
LW004-PB Support LoRaWAN GPS and BLE RFID IOT Tracker has built in RFID and 3-axis accelerometer sensor. It can be used to employee attendance, access control, identity identification and motion detection.
Reference: DWM23072801
RAK2270 is a sleek sticker tracker for LoRaWAN® designed like a label, making it easy to attach to any product. It offers real-time location tracking through the Helium network server's advanced features.
Reference: DWM22082502
RAK5146 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1303 and SX126X for Listen Before Talk feature, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.
Reference: DWM25062602
The LRS10701-CPV0 by SENSO8 is an advanced indoor air quality (IAQ) monitoring device based on LTE Cat NB1 (NB-IoT) wireless communication monitoring parameters such as temperature, humidity, PM1.0, PM2.5, PM10, CO2, TVOC, and other relevant parameters.
Reference: DWM20053102
Brand: Semtech
DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.
Reference: DWM22123002
RAK2013 4G/ LTE Nb-IoT is a Raspberry Pi 4B compatible cellular communication module It supports the following standards: 4G/LTE, Nb-IoT, CAT-M/CAT1/CAT4 Cellular.
Reference: DWM23010801
RAK2171 is RAK latest LoRaWAN GPS tracking device. It comes in a small form factor with rechargeable battery and tracking and configuration application, available for iOS and Android devices.
Reference: DWM23080601
IOT Smart Biometric Monitoring Kit with RAK5860 NB-IOT module Quectel BG77 includes biometric sensors for monitoring heart rate and blood oxygen levels, as well as a non-contact body temperature sensor, providing valuable data for monitoring health and fitnes
Reference: DWM23080608
The LoRaWAN Smart Home Office Security Kit includes a range of sensors and intrusion detection sensors include PIR, radar, and ultrasonic sensors. The access control modules include fingerprint, NFC, and barcode sensors that provide secure and convenient access to your home or office.
Reference: DWM22082503
RAK11300 is based on the Raspberry Pi RP2040 chip and SX1262 RF transceiver it's complies with Class A & C of LoRaWAN 1.0.2 specifications.
Reference: DWM22082505
RAK3172 based on STM32WLE5CC chip is a low-power long-range transceiver module for LoRa and LoRaWAN applications.
Reference: DWM23080402
Indoor Location Tracker Kit with LoRaWAN, The Kit is providing all components to build a UWB based indoor tracking and location system .It includes motion sensors and four UWB modules.
Reference: DWM23080405
Environment Air Quality Sensor Kit with RAK13101 GSM module Quectel MC20CE It features sensors for temperature, humidity, pressure, UV, CO2, Particulate Matter, VOC, and IAQ. Additionally, it supports different connectivity options like LoRaWAN, BLE, LTE-M, and NB-IoT.
Reference: DWM21040701
DWM-RAK2287 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1302, the module comes with a ZOE-M8Q GPS chip, in order to provide GNSS functionality.
Reference: DWM23080604
IoT Starter Kit with RAK5860 NB-IOT module Quectel BG77 including LoRaWAN, BLE, LTE-M/NB-IoT, and a range of different modules, including temperature/humidity, accelerometer, barometer, ambient light, and GPS. It also supports multiple outputs such as a buzzer, RGB LED, and I2C OLED.
Reference: DWM24012601
The Meshtastic starter Kit includes a WisBlock Base board and the RAK4631 WisBlock Core module, already flashed with the Meshtastic firmware. Power the boards up and start sending messages immediately.
Reference: DWM23080401
The RAK Agriculture Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
