Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The D22-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use The temperature sensor used in D22-LS can measure -55°C ~125°C with accuracy ±0.5°C (max ±2.0 °C).
The Dragino D22-LS is a LoRaWAN Temperature Sensor for the Internet of Things solution. D22-LS is designed for use in soil or on roads. D22-LS will convert the Temperature reading to LoRaWAN wireless data and send it to the IoT platform via the LoRaWAN gateway.
The LoRa wireless technology used in D22-LS allows the device to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
The temperature sensor used in D22-LS can measure -55°C ~125°C with accuracy ±0.5°C (max ±2.0 °C).
D22-LS supports a temperature alarm feature, user can set a temperature alarm for instant notice. D22-LS supports the Datalog feature, it can save the data when there is no LoRaWAN network and uplink when the network recovers.
D22-LS supports BLE configure and wireless OTA update which make users easy to use.
D22-LS is powered by a solar+ Li-ion battery, designed for long-term use of up to 5 years.
Each D22-LS is pre-loaded with a set of unique keys for LoRaWAN registrations, register these keys to the local LoRaWAN server and it will auto-connect after powering on.
LoRaWAN 1.0.3 Class A
Ultra-low power consumption
2 x DS18B20 Temperature sensor,2meters
Measure range -55°C ~125°C
Temperature alarm
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
Uplink on periodically
Downlink to change configure
IP66 Waterproof Enclosure
Solar panel + 3000mAh Li-ion battery
Supply Voltage: built-in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Dallas DS18B20
Range: -55 to + 125°C
Accuracy ±0.5°C (max ±2.0 °C).
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
1 x D22-LS LoRaWAN Waterproof /Outdoor Temperature Sensor
XX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
KZ865: Default frequency band KZ865
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM23070101
D22-LB is a LoRaWAN Temperature Sensor with 2 x DS18B20 supports BLE configure and wireless OTA update.
Reference: DWM25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes which are based on DS18B20 convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM25021301
The D20-LS/ D20S-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use or use in soil or on roads supports BLE configuration and wireless OTA update, making users easy to use.
Reference: DWM25022501
The LDS12-LS is a Solar-powered LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor that can measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m).
Reference: DWM25022601
The MDS200-LS is a solar-powered LoRaWAN Microwave Radar distance sensor. It uses a 24Ghz Microwave to detect the distance between the sensor and different objects. Microwave Radars supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM24022602
The PS-LS-I sensors is powered by solar power + li-on battery with an Immersion Installation Type Air Water Pressure sensor which can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
Reference: DWM25021301
The D20-LS/ D20S-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use or use in soil or on roads supports BLE configuration and wireless OTA update, making users easy to use.
Reference: DWM24081201
PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. PB01 transfers the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.
Reference: DWM23072303
The DDS04-LB is a LoRaWAN 4-Channels Distance Sensor upports BLE configure and wireless OTA update for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM25022701
The MDS120-LS is a LoRaWAN Microwave Radar distance sensor with a Measure Range: of 15 ~ 1200cm supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM24022601
The PS-LS-T sensors is powered by solar power + li-on battery with an Thread Installation Type Air Water Pressure sensor which can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
Reference: DWM25021502
The D23-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use and supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM25021901
The TC01/TC11-LB is a LoRaWAN Thermocouple Converter that measures the industrial environment temperature and then uploads it to the IoT server via the LoRaWAN network.
Reference: DWM24030201
SN50V3-LS Solar Powered LoRaWAN Sensor Node It is designed for outdoor use and powered by a solar panel + li-on battery for long-term use and Supports BLE configuration and wireless OTA update .
Reference: DWM24030102
TS01-LS is powered by a solar panel LoRaWAN Tilting Sensor for detecting large-scale equipment and supports BLE configuration and wireless OTA update.
Reference: DWM24090501
The LDS40-LS is Powered by a solar panel + li-on battery with a LiDAR ToF (Time of Flight) Distance Sensor that supports BLE configuration and wireless OTA update can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection.
Reference: DWM24030103
The SE01-LS LoRaWAN Soil Moisture & EC Sensor is powered by Solar for IoT of Agriculture and supports BLE configuration and wireless OTA update.
Reference: DWM25021601
The S31B-LS is a solar-powered LoRaWAN Temperature and Humidity Sensor for the Internet of Things solution that supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
The D22-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use The temperature sensor used in D22-LS can measure -55°C ~125°C with accuracy ±0.5°C (max ±2.0 °C).
