Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
RS485-LS is a Solar Powered RS485/ UART to LoRaWAN Converter Users can connect the RS485 or UART sensor to the RS485-LS converter Supports BLE configuration and wireless OTA update.
The RS485-LS is an RS485/ UART to LoRaWAN Converter for Internet of Things solutions. Users can connect RS485 or UART sensor to the RS485-LS converter, and configure RS485-LS to periodically read sensor data and upload via the LoRaWAN network to the IoT server.
RS485-LS can interface to the RS485 sensor, 3.3v/5v UART sensor, or interrupt sensor. RS485-LS provides a 3.3v output and a 5v output to power external sensors. Both output voltages are controllable to minimize the total system power consumption.
RS485-LB/LS is IP67 waterproof and powered by a solar panel + 3000mAh li-on battery it is designed for long-term use for several years.
RS485-LS runs standard LoRaWAN 1.0.3 in Class A. It can reach a long transfer range and is easy to integrate with a compatible gateway and IoT server.
For data uplink, RS485-LS sends user-defined commands to RS485 devices and gets the return from the RS485 devices. RS485-LS will process these returned data according to user-defined rules to get the final payload and upload it to the LoRaWAN server.
For data downlink, RS485-LS runs in LoRaWAN Class A. When there are downlink commands from the LoRaWAN server, RS485-LS will forward the commands from the LoRaWAN server to RS485 devices.
RS485-LS Supports BLE configuration and wireless OTA update which makes users easy to use.
Each RS485-LS pre-load with a set of unique keys for LoRaWAN registration, register these keys to the LoRaWAN server and it will auto-connect after powering on.
LoRaWAN 1.0.3 Class A
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864/MA869
Ultra-low power consumption
Support multiply RS485 devices by flexible rules
Support Modbus protocol
Support Interrupt uplink
Supports connecting UART sensors with 3.3V or 5V
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
AT Commands to change parameters
Uplink on periodically
Downlink to change configure
Solar panel + 3000mAh Li-on battery (RS485-LS)
Supply Voltage: Built-in Battery, 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Battery controllable output (2.6v ~ 3.6v depends on battery)
+5v controllable output
1 x RS485 Interface
1 x UART Interface , 3.3v or 5v
1 x Interrupt or Digital IN/OUT pins
1 x I2C Interface
1 x one wire interface
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Solar panel + Li-on battery
Capacity: 3000mAh
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Wireless Alarm and Security Systems
Home and Building Automation
Automated Meter Reading
Industrial Monitoring and Control
Long-range Irrigation Systems, etc.
1 x RS485-LS RS485/UART to LoRaWAN Converter
Device Size: 9.7 x 6.5 x 4.7 cm
Device Weight: 150g
Package Size / pcs: 14.0 x 8x 5 cm
Weight / pcs: 180g
RS485-LS-XX-YY:
XX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
YY:
12: With M12 IP68 waterproof cable hole(default)
16: With M16 IP68 waterproof cable hole
Reference: DWM20022602
The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.
Reference: DWM22090703
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO.
Reference: DWM23010802
RAK7431 is a Modbus RS485 to LoRaWAN® bridge designed for industrial applications. The device relays Modbus data using the LoRaWAN network as a means of wirelessly transmitting to and from the end devices.
Reference: DWM23101802
The RS485-LB is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload via LoRaWAN network to IoT server.
Reference: DWM24022601
The PS-LS-T sensors is powered by solar power + li-on battery with an Thread Installation Type Air Water Pressure sensor which can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM24030103
The SE01-LS LoRaWAN Soil Moisture & EC Sensor is powered by Solar for IoT of Agriculture and supports BLE configuration and wireless OTA update.
Reference: DWM23072303
The DDS04-LB is a LoRaWAN 4-Channels Distance Sensor upports BLE configure and wireless OTA update for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM24022602
The PS-LS-I sensors is powered by solar power + li-on battery with an Immersion Installation Type Air Water Pressure sensor which can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
Reference: DWM24030105
The SPH01-LS is a LoRaWAN Soil pH Sensor powered by Solar for IoT of Agriculture that supports BLE configuration and wireless OTA update.
Reference: DWM24081201
PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. PB01 transfers the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.
Reference: DWM23070102
D23-LB is a LoRaWAN Temperature Sensor with 3 x DS18B20 supports BLE configure and wireless OTA update.
Reference: DWM24030102
TS01-LS is powered by a solar panel LoRaWAN Tilting Sensor for detecting large-scale equipment and supports BLE configuration and wireless OTA update.
Reference: DWM23101801
WSC2-LB is the Main Process Unit for Weather Station solution which is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.
Reference: DWM24011902
The AQS01-L is an Indoor LoRaWAN Air Quality Sensor is designed to measure the surrounding environment parameters include: CO2, Temperature , Relative Air Humidity and Air pressure, and then upload to IoT server via LoRaWAN wireless protocol.
Reference: DWM24030104
LMS01-LS is a LoRaWAN Leaf Moisture Sensor for IoT of Agriculture Powered by a solar panel Supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM24090501
The LDS40-LS is Powered by a solar panel + li-on battery with a LiDAR ToF (Time of Flight) Distance Sensor that supports BLE configuration and wireless OTA update can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection.
Reference: DWM23122602
LA66 USB LoRaWAN Adapter v2 is designed to fast turn USB devices to support LoRaWAN wireless features which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
Reference: DWM24030201
SN50V3-LS Solar Powered LoRaWAN Sensor Node It is designed for outdoor use and powered by a solar panel + li-on battery for long-term use and Supports BLE configuration and wireless OTA update .
Reference: DWM23122501
TS01-LB is an outdoor LoRaWAN Tilting Sensor which is specially designed for detecting the angle of trees, buildings or large scale equipment measures pitch and roll angle and converts to LoRaWAN wireless data and sends to IoT platform via LoRaWAN network.
RS485-LS is a Solar Powered RS485/ UART to LoRaWAN Converter Users can connect the RS485 or UART sensor to the RS485-LS converter Supports BLE configuration and wireless OTA update.
