Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The LLDS40 is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
The Dragino LLDS40 is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 40m. The LiDAR probe uses laser induction technology for distance measurement.
The LLDS40 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LLDS40 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LLDS40 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LLDS40 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
LoRaWAN 1.0.3 Class A
Ultra-low power consumption
Laser technology for distance detection
Measure Distance: 0.1m~40m @ 90% Reflectivity
Accuracy : ±5cm@(0.1-5m), ±1%@(5m-40m)
Monitor Battery Level
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
AT Commands to change parameters
Uplink on periodically
Downlink to change configure
8500mAh Battery for long-term use
Storage temperature:-30℃~80℃
Operating temperature:-20℃~60℃
Measure Distance:
0.1m ~ 40m @ 90% Reflectivity
0.1m ~13.5m @10%Reflectivity
Distance resolution: 1cm
Enclosure rating: IP65
Light source: VCSEL
Central wavelength: 850nm
FOV:3°
Material of enclosure: ABS+PC
Wire length: 75cm
Accuracy:±5cm@(0.1-5m),±1%@(5m-40m)
Ambient light immunity: 100klux
Horizontal distance measurement
Parking management syste
Object proximity and presence detection
Intelligent trash can management system
Robot obstacle avoidance
Automatic control
Sewer
Part Number:LLDS40-XXX
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
LLDS40 LoRaWAN LiDAR Distance Sensor x 1
Package Dimension:150*120*55mm
Weight: 220g
Reference: DWM20072902
The LDDS75 LoRaWAN Distance Detection Sensor node is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM22071402
The LG308N is an open source Linux LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network.
Reference: DWM22082506
The LDDS04 is a LoRaWAN 4-Channels Distance Sensor for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM23072301
The CPL03-LB is a LoRaWAN Contact Sensor supports BLE configure and wireless OTA update. It detects open/close status and uplinks to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
Reference: DWM22091403
ES-261520 3.6V 8500mAh Li/ SOCI2 Battery for Dragino IOT sensor nodes like the LSN50-V2, LSN50v2-D20, LDDS75, LSE01,20, LSN50-V2-S31.
Reference: DWM23072203
DDS75-LB LoRaWAN Distance Detection Sensor which supports BLE configure and wireless OTA update is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
Reference: DWM23041801
The LHT65N-E2 is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: DWM16122302
The Lora/GPS Arduino Shield is with 433MHz /868MHz /915MHz Versions is a expension board of LoRa™/GPS for use with the arduino.This product is intended for those interested in developing LoRa™/GPS solutions.
Reference: DWM22071801
The LSN50v2-D22 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: DWM23070201
S31-LB is a LoRaWAN Temperature and Humidity Sensor with a SHT31 sensor probe based SN50v3-LB or LSN50V3 supports BLE configure and wireless OTA update.
Reference: DWM21072702
The LSN50V2-S31B is LoRaWAN Temperature & Humidity Sensor node be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: DWM23072302
The SPH01-LB LoRaWAN Soil pH Sensor supports BLE configure and wireless OTA update for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level IP68 waterproof.
Reference: DWM23021007
The LHT65S-NE117 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor use an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.
Reference: DWM21031502
The DWM-AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM17112001
EC25 Mini PCIe IOT LoRa Gateway 4G Cellular Module is Quectel EC25 which is used in the LG308 and DLOS8 IOT LoRa Gateway as bridge of 4G cellular wireless network.
Reference: DWM22072102
LA66 USB LoRaWAN Adapter which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module.
Reference: DWM23021008
The LHT65S Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.
Reference: DWM22082509
The LDS03A is an Open/Close LoRaWAN Door Sensor. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
Reference: DWM23072201
The SW3L-LB is a new LoRaWAN Outdoor water Flow Sensor supports BLE configure and wireless OTA update which use to detects water flow volume and uplink to IoT server via LoRaWAN network it can be used at indoor and outdoor use.
The LLDS40 is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
