Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
SN50v3-NB is a Long Range NB-IoT Sensor Node based on the BC660K-GL model that supports uplink methods including MQTT, MQTTs, UDP & TCP. supports BLE configuration and OTA update supports uplinks to various IoT Servers.
SN50v3-NB is a Long Range NB-IoT Sensor Node. It is designed to facilitate developers' quick deployment of industrial-level NB-IoT solutions. It helps users turn an idea into a practical application and make the Internet of Things a reality. It is easy to program, create, and connect things everywhere.
The SN50v3-NB wireless part is based on the NB model, which allows the user to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, etc.
SN50v3-NB uses an STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xxxx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPROM and 20 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals.
SN50v3-NB is an open-source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found on the ST site for rapid development.
SN50v3-NB supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and supports uplinks to various IoT Servers.
SN50v3-NB supports BLE configure and OTA update which makes users easy to use.
SN50v3-NB is powered by an 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
SN50v3-NB has an optional built-in SIM card and default IoT server connection version. Which makes it work with a simple configuration.
NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
Ultra-low power consumption
Open-source hardware/software
Multiply Sampling and one uplink
Support Bluetooth v5.1 remote configure and update firmware
Uplink via MQTT, MQTTs, TCP, or UDP
Uplink on periodically
Downlink to change configure
8500mAh Battery for long-term use
Nano SIM card slot for NB-IoT SIM
Supply Voltage: 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Battery output (2.6v ~ 3.6v depends on battery)
+5v controllable output
3 x Interrupt or Digital IN/OUT pins
3 x one-wire interfaces
1 x UART Interface
1 x I2C Interface
NB-IoT Module: BC660K-GL
Support Bands:
B1 @H-FDD: 2100MHz
B2 @H-FDD: 1900MHz
B3 @H-FDD: 1800MHz
B4 @H-FDD: 2100MHz
B5 @H-FDD: 860MHz
B8 @H-FDD: 900MHz
B12 @H-FDD: 720MHz
B13 @H-FDD: 740MHz
B17 @H-FDD: 730MHz
B18 @H-FDD: 870MHz
B19 @H-FDD: 870MHz
B20 @H-FDD: 790MHz
B25 @H-FDD: 1900MHz
B28 @H-FDD: 750MHz
B66 @H-FDD: 2000MHz
B70 @H-FDD: 2000MHz
B85 @H-FDD: 700MHz
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
STOP Mode: 10uA @ 3.3v
Max transmit power: 350mA@3.3v
Part Number: SN50v3-NB-XX-YY
XX:
GE: General version ( Exclude SIM card)
1T: with 1NCE * 10 years 500MB SIM card and Pre-configure to ThingsEye server
YY: The grand connector hole size
M12: M12 hole(Default shipping)
M16: M16 hole
M20: M20 hole
1 x SN50v3-NB module
1 x Antenna
Device Size: 9.7 x 6.5 x 4.7 cm
Device Weight: 150g
Package Size / pcs: 14.0 x 8x 5 cm
Weight / pcs: 180g
Smart Buildings & Home Automation
Logistics and Supply Chain Management
Smart Metering
Smart Agriculture
Smart Cities
Smart Factory
Reference: DWM22091402
Dragino NDS01 is a NB-IOT Door Sensor for Internet of Things solution. It is used to detect the open/close event for door and uplink the event to IoT server via NB-IoT network.
Reference: DWM22110601
The CPN01 is an NB-IoT Dry Contact Sensor. It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the dry contact status, open time, and open counts in the IoT Server.
Reference: DWM23021002
The NDS03A is an Open/Close NB-IoT Door Sensor. It detects door open/close status and uplinks to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
Reference: DWM23101803
The S31-NB and S31B-NB are NB-IoT Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via NB-IoT network.
Reference: DWM23122603
The WL03A-NB is a NB-IoT None-Position Rope Type Water Leak Controller. User can lay the WL03A-NB + Water Leak Cable on the ground to detect water leakage supports BLE configure and OTA update.
Reference: DWM24011401
The CPL03-NB is a NB-IoT Contact Sensor for Internet of Things solution. it detects dry contact status, open time, open counts, and then upload to IoT server via NB-IoT network supports BLE configure and OTA update.
Reference: DWM24011202
The LDS40-NB NB-IoT LiDAR ToF Distance Sensor be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
Reference: DWM23122604
DDS04-NB is a NB-IoT 4-Channels Distance Sensor nodes is capable to add up to four Ultrasonic Sensors to measure four distances at the same time. the sensor need to buy separately.
Reference: DWM24011402
The SPH01-NB is NB-IoT Soil pH Sensor for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level.
Reference: DWM25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes which are based on DS18B20 convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM24011201
The LDS12-NB is a NB-IoT LiDAR ToF (Time of Flight) Distance Sensor It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m) can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection,...
Reference: DWM25011504
D23-NB is an NB-IoT Temperature Sensor that supports three Temperature Sensor probes that support BLE configuration and OTA updates to convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM25011501
The D20-NB and D20S-NB NB-IoT Temperature Sensors uplink methods including MQTT, MQTTs, UDP & TCP support BLE configure and OTA update, convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM23101803
The S31-NB and S31B-NB are NB-IoT Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via NB-IoT network.
Reference: DWM24011901
The LMS01-NB is a NB-IoT Leaf Moisture Sensor It is designed to measure the leaf moisture and temperature, so to send to the platform to analyze the leaf status such as: watering, moisturizing, dew, frozen.
Reference: DWM23122502
TS01-NB is an outdoor NB-IOT Tilting Sensor which is specially designed for detecting the angle of trees, buildings or large scale equipment measures pitch and roll angle and converts to NB-IoT wireless data and sends to IoT platform via NB-IoT network.
Reference: DWM23122601
SDI-12-NB is a SDI-12 to NB-IoT Converter supports BLE configure and OTA update and designed for Smart Agriculture sensor and Weather Station.
Reference: DWM24011203
The SE01-NB uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to NB-IoT IoT Server.
SN50v3-NB is a Long Range NB-IoT Sensor Node based on the BC660K-GL model that supports uplink methods including MQTT, MQTTs, UDP & TCP. supports BLE configuration and OTA update supports uplinks to various IoT Servers.
