Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The CPL03-NB is a NB-IoT Contact Sensor for the Internet of Things solution. it detects dry contact status, open time, open counts, and then upload to IoT server via NB-IoT network supports BLE configure and OTA update.
The Dragino CPL03-NB is an NB-IoT Contact Sensor for the Internet of Things solution. It detects dry contact status, open time, and open counts, and then uploads to the IoT server via the NB-IoT network.
The CPL03-NB will send periodic data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each open/closed event, instead, the device can count each open event and uplink periodically.
CPL03-NB supports an open alarm feature, the user can set the open alarm for instant notice. CPL03-NB supports the Datalog feature, it can save the data when there is no NB-IoT network and uplink when the network recovers.
CPL03-NB is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
CPL03-NB supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and supports uplinks to various IoT Servers.
CPL03-NB supports BLE configure and OTA update which make users easy to use.
CPL03-NB is powered by an 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
CPL03-NB has an optional built-in SIM card and default IoT server connection version. Which makes it work with a simple configuration.
NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
Ultra-low power consumption
Upload water flow volume
Door Open/Close detect
Door open/close statistics
Datalog Feature
Open Alarm Feature
Multiply Sampling and one uplink
Support Bluetooth v5.1 remote configure and update firmware
Uplink on periodically
Downlink to change configure
8500mAh Battery for long-term use
Nano SIM card slot for NB-IoT SIM
Supply Voltage: built-in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
NB-IoT Module: BC660K-GL
Support Bands:
B1 @H-FDD: 2100MHz
B2 @H-FDD: 1900MHz
B3 @H-FDD: 1800MHz
B4 @H-FDD: 2100MHz
B5 @H-FDD: 860MHz
B8 @H-FDD: 900MHz
B12 @H-FDD: 720MHz
B13 @H-FDD: 740MHz
B17 @H-FDD: 730MHz
B18 @H-FDD: 870MHz
B19 @H-FDD: 870MHz
B20 @H-FDD: 790MHz
B25 @H-FDD: 1900MHz
B28 @H-FDD: 750MHz
B66 @H-FDD: 2000MHz
B70 @H-FDD: 2000MHz
B85 @H-FDD: 700MHz
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
STOP Mode: 10uA @ 3.3v
Max transmit power: 350mA@3.3v
Wireless Alarm and Security Systems
Home and Building Automation
Industrial Monitoring and Control
CPL03-NB NB-IoT Pulse/Contact sensor x 1
External antenna x 1
Size: 195 x 125 x 55 mm
Weight: 420g
Part Number: CPL03-NB-XX
XX:
GE: General version (Exclude SIM card)--default shipping
1T: with 1NCE*10years 500MB SIM card and Pre-configure to DataCake server
1NCE SIM Card NB-IoT network coverage: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak, Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
Datasheet
User Manual
Firmware
Certificate
BC660 Wireless upgrade NB & NS firmware?
Reference: DWM21051602
The LDS02 is a LoRaWAN Door Sensor. It detects door open/close status build in a sx1262 Lora chipset and 2 x AAA batteries and target for long time use.
Reference: DWM22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM23072301
The CPL03-LB is a LoRaWAN Contact Sensor supports BLE configure and wireless OTA update. It detects open/close status and uplinks to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
Reference: DWM23122604
DDS04-NB is an NB-IoT 4-Channels Distance Sensor node that is capable of adding up to four Ultrasonic Sensors to measure four distances at the same time. the sensor needs to be bought separately.
Reference: DWM25030201
PS-NB-D NB-IoT Differential Pressure Sensor uses Differential Pressure Sensor includes various models to cover NB-IoT wireless transmission and different ranges of pressure measurements.
Reference: DWM25030203
PS-NB-T NB-IOT Thread Installation LoRaWAN Air /Water Pressure Sensor that can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the NB-IOT server.
Reference: DWM24011402
The SPH01-NB is NB-IoT Soil pH Sensor for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level.
Reference: DWM24011901
The LMS01-NB is a NB-IoT Leaf Moisture Sensor It is designed to measure the leaf moisture and temperature, so to send to the platform to analyze the leaf status such as: watering, moisturizing, dew, frozen.
Reference: DWM24011201
The LDS12-NB is an NB-IoT LiDAR ToF (Time of Flight) Distance Sensor It is capable of measuring the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m) can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection,...
Reference: DWM23021003
The MDS200-NB is an NB-IoT Microwave Radar distance sensor. It uses a 24Ghz Microwave to detect the distance between the sensor and different objects. It can sense the correct distance even if there is water or thick dust on the sensor.
Reference: DWM25011401
SN50v3-NB is a Long Range NB-IoT Sensor Node based on the BC660K-GL model that supports uplink methods including MQTT, MQTTs, UDP & TCP. supports BLE configuration and OTA update supports uplinks to various IoT Servers.
Reference: DWM23122601
SDI-12-NB is an SDI-12 to NB-IoT Converter that supports BLE configuration and OTA update and is designed for Smart Agriculture sensors and Weather Station.
Reference: DWM23101803
The S31-NB and S31B-NB are NB-IoT Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via NB-IoT network.
Reference: DWM25022101
The DDS75-NB is an NB-IoT Distance Detection Sensor that uses BC660K-GL that detect the distance between the measured object and the sensor and sends the IoT platform via the NB-IoT network.
Reference: DWM25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes which are based on DS18B20 convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM25020701
The RS485-NB is an RS485 / UART to NB-IoT Converter for IOT applications that can read sensor data and upload via the NB-IoT network to the IoT server supports BLE configuration and OTA update which makes it users easy to use.
Reference: DWM24011203
The SE01-NB uses the FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to the NB-IoT IoT Server.
Reference: DWM25022702
The MDS120-NB is an NB-IoT Microwave Radar Distance Sensor that uses Microwave Radar to detect the distance between the sensor and different objects Measure Range: 15 ~ 1200cm.
Reference: DWM24011202
The LDS40-NB NB-IoT LiDAR ToF Distance Sensor be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
The CPL03-NB is a NB-IoT Contact Sensor for the Internet of Things solution. it detects dry contact status, open time, open counts, and then upload to IoT server via NB-IoT network supports BLE configure and OTA update.
