- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Serial to WiFi/Serial to RJ45/RJ45 to WiFi/WiFi Router StartKit.
Features: with a wireless router a full set of features:
Support the AP (wireless access point), the Client (Client), the Repeater (wireless relay),
Bridge (wireless Bridge), the Router (wireless Router) five working mode
AP mode - the default work mode. This mode device is a wireless access point, support plug
and play, no configuration.
The Router mode - this mode device is equivalent to a wireless Router, the wired interface
as the WAN, the wireless LAN. Multiple wireless clients can share a broadband link on the
Internet.
Repeater mode, use of equipment of the wireless relay function, realizes the wireless
signal relay and amplified, and form a new wireless coverage area, finally achieve the goal
of extending wireless network coverage.
Bridge model, use of equipment of Bridge function, first RM04 set up a wireless connection
with the front end of wireless network, a wireless signals, and then itself to form a new
wireless coverage, can effectively solve the problem of weak signal and signal blind spots,
such as wireless coverage.
Client work mode - in this mode the AP for the AP is wireless Client, equivalent to a
wireless network card.
2. 10/100 m adaptive Ethernet interface module integration, the serial communication baud
rate is as high as 230.4 Kbps 1, a serial port turn WIFI module, a serial port turn
Ethernet module, Ethernet switch WIFI multi-function WIFI module, a serial port server
module, make it easy for your serial port device connected to the Internet, transparent
two-way data transmission, to ensure the highest limit of ease of use and compatibility
3.3. By using the world's top network chip suppliers LeiLing ralink solution, raw materials
adopt TDK / / murata, big brands, stable and reliable basis
4. The system core is suitable for the security of the reliable and long-term running
system application
5. Size: 40 * (29) smaller than credit card a third
6. Working temperature: : - 20 ~ 60 degree.
7. The built-in 360 m of MIPS CPU, 16 m and 4 m FLASH and wireless baseband and rf front
end and a variety of peripheral bus
8. Through CE and FCC certification, support the IEEE 802.11 b/g/n, support transparent
protocol data transmission mode
9. Most support WIFI encryption methods and algorithms, WEP/WAP wpa2-psk/WAP2 wpa2-
psk/WAPI, WEP64 WEP128 / TKIP/AES encryption type
10. AT + instruction set configuration, provides the friendly Web configuration page,
through a Web configuration
11. The optional built-in onboard or external antenna
12. Support wireless work in AP model and node (Station), the real hardware AP, support
iphone and android systems all WIFI connection, support functions of AP and Station online
at the same time
13. Optional TCP Server/TCP Client/UDP work mode, support network protocol: TCP/UDP/ARP,
ICMP/HTTP/DNS/DHCP
14. Support DHCP automatically obtain IP, support work in AP mode to assign IP from the
device
15, a serial port speed is adjustable, the highest support 230400
16, strong technical support, can provide customized demand.
Reference: DWM14032501
HLK-RM04 is Hi-Link low-cost embedded UART-ETH-WIFI converter module (serial port - Ethernet -Wireless network) you can take it as an ethernet wireless brige can used to be an wireless internet network and wifi router.
Reference: DWM14032502
2.4GHz whip Antenna it's for wifi module ,bluetooth module,zigbee module and wifi routers.
Reference: DWM14060501
HLK-RM10 is a new low-cost embedded UART-ETH-WIFI module (serial port - Ethernet -Wireless network) .
Reference: DWM14061501
HLK-RM02 is a Mini wireless router basic with the Ralink RT5350 main chip.WIFI Router/Gateway/Bridge/AP All-In-One HLK-RM02.
Reference: DWM15041601
2.4ghz PCB built-in antenna with ipx/ufl connector for WIFI antenna , Blue tooth antenna and Zigbee Antenna.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM19060503
The Intel AX200 1730Mbps Dual Band 802.11ax Intel Wifi 6 AX200 NGW M.2 Wireless Wlan Wi-Fi Card Adapter For Intel AX200 With BT 5.0 MU-MIMO
Reference: DWM24022701
DWM-JS7688 is based on the MTK (Mediatch) MT7688AN SOC chip Running the OpenWRT (Linux) system used for smart homes, IP cameras, VOIP, remote control shooting aircraft, remote monitoring, and other super applications.
Reference: DWM15080504
Low Price ESP-12E ESP8266 Serial Wi-Fi Wireless Transceiver Module for Arduino / RPi Built-in Antenna.it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home,wifi router.
Reference: DWM23092701
WTLRC262-SG based on the Espressif ESP32-C2 and Semtech SX1262 chips. It can be used as a LoRa® terminal node. It supports communication functions of Wi-Fi, BLE, and LoRa.
Reference: DWM21031003
WT32-ETH01 embedded WIFI serial port to Ethernet module based on ESP32 series module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices.
Reference: DWM21030901
The WT-01F module core processor ESP8285 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU the main frequency supports 80 MHz and 160 MHz, and supports RTOS, Integrated Wi-Fi MAC/BB/RF/PA/LNA, external spring antenna.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM14110207
Low cost DWM-NRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible module.
Reference: DWM17072501
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
Reference: DWM15092501
HI-Link HLK-SW16 16 Channel Android/Smart Phone CWiFi Relay /WiFi Relay Module with P2P Function.
Reference: DWM14101101
Low cost UART-WIFI module, DWM-HLK-RM30 is a serial device provide solution for serial device transfer data with Ethernet.
Reference: DWM17082402
WT8266-DK WiFi Module Development Kit for WT8266-S1&WT8266-S2 The test board can simulate serial devices to access WiFi network and implement the data transmission, meanwhile it can simulate working as the main control chip to access data of other devices and control
Reference: DWM19011502
The OLG01-N is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM14120901
Low cost ESP8266 ESP-01 Serial to WIFI Wireless Transceiver Module it's for Arduino,Raspberry Pi , AVR and ARM DK.
Reference: DWM25042502
Alfa Networks AHPI7292S WiFi HaLow Pi Hat is compatible with the Raspberry Pi to be mounted on top of the Raspberry Pi, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board.
Serial to WiFi/Serial to RJ45/RJ45 to WiFi/WiFi Router StartKit.