Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Price
Price
$4.00 - $329.00
Part Number
Part Number
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
There are 55 products.
Active filters
Reference: DWM24071301
The UWB3000F00 adopted Qorvo's DW3000, designed with PCB Antenna. UWB3000 is in line with IEEE802.15.4-2015 and IEEE802.15.4z (BPRF mode). It can be used for two-way ranging, TDOA, and PDOA systems, with a positioning accuracy of 10 cm.
Reference: DWM23072601
The E72-2G4M05S1B is a small SMD Bluetooth wireless module independently developed by Ebyte based on Texas Instruments' CC2640.
Reference: DWM23010502
HTIT-Wsh ESP32-S3 SX1262 WIFI BLE LoRa/ LoRaWAN Wireless Shell-V3 provides Wi-Fi, BLE, and LoRa solutions, which perfectly support Arduino development environment.
Reference: DWM24071302
The UWB3000F27 adopted Qorvo's DW3000, designed with a PCB antenna and a 500mW high-power amplifier chip. UWB3000 is in line with IEEE802.15.4-2015 and IEEE802.15.4z (BPRF mode). It can be used for two-way ranging, TDOA, and PDOA systems, with a positioning accuracy of 10 cm.
Reference: DWM23072602
E72-2G4M23S1A is small SMD Cortex-M3 Zigbee and 6LoWPAN wireless module built-in with TI SoC CC2630 working at 2.402～2.480GHz, with 23dB maximum power and PCB antenna&IPEX interface. It has super low RF & MCU current and low power consumption.
Reference: DWM23010503
ESP32-LoRa Dev Backplane Compatible with HTIT-Wsh and HT-CT62.
Reference: DWM24071303
The UWB650 module is based on Ultra Wide Band (UWB) technology and compliant with the IEEE 802.15.4-2020 Standard protocol. Users can easily utilize these functions through the UART interface on the module without the need for additional design and development.
Reference: DWM23072603
E72-2G4M05S1A is small SMD Cortex-M3 Zigbee and 6LoWPAN wireless module built-in with TI SoC CC2630 working at 2.402～2.480GHz, with 5dBm maximum power and PCB antenna&IPEX interface. It has super low RF & MCU current and low power consumption.
Reference: DWM23010504
ESP32-S3 SX1262 WIFI BLE LoRa/ LoRaWAN Wireless Stick-V3 provides Wi-Fi, BLE, and LoRa solutions, which perfectly support Arduino®。 Users can easily carry out secondary development and application.
Reference: DWM24061701
HELTEC LoRa32 V3.1 can install the Meshtastic firmware as a development board which is a highly integrated product based on ESP32(including WiFI and BLE), Li-Po battery management system,0.96” OLED also included.
Reference: DWM23072701
CC2640R2L UART to BLE Slave Module is a serial port to BLE Bluetooth slave node module that supports Bluetooth protocol version 5.0. It is small in size and low in power consumption. It works in the 2.4GHz frequency band.
Reference: DWM24061702
HELTEC Stick Lite V3 can install the Meshtastic firmware as a development board which is a highly integrated product based on ESP32(including WiFI and BLE), Li-Po battery management system.
Reference: DWM23072702
E104-BT51 built-in TI SoC CC2640R2F UART to BLE Slave Module is a serial port to BLE Bluetooth slave node module that supports Bluetooth protocol version 5.0. It is small in size and low in power consumption. It works in the 2.4GHz frequency band.
Reference: DWM24061801
HELTEC Wireless Tracker can install the Meshtastic firmware as a development board which is based on ESP32-S3FN8. It integrates both SX1262 and UC6580 to provide fast GNSS solution for IoT.
Reference: DWM23072703
E22-XXXT22U are the new generation of LoRa wireless spread spectrum modules using USB standard package, convenient for user development and use.
