Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
There are 115 products.
Active filters
Reference: DWM22122904
The LoRaWAN Pyranometer sensor measures solar radiation. It is suitable to be used to monitor solar activity in solar parks, solar-dependent systems, and others.
Reference: DWM22122905
The LoRaWANenvironmental monitoring and moving detection solution includes a combination of the Temperature and Humidity Sensor and the 3-axis Acceleration Sensor inside the Sensor Probe.
Reference: DWM22123001
The Raspberry Pi 4 Model B is the best single-board computer to develop your IoT project, and start your first gateway for NB-IoT/Cat-M and LoRaWAN with the RAK Pi HAT.
Reference: DWM22052401
RAK2247 Pi HAT is a converter board with a Raspberry Pi form factor that enables the RAK2247 LPWAN concentrator module to be mounted on the top of the Raspberry Pi.
Reference: DWM22052403
RAK8213 is a multi-band LTE Cat M1/Cat NB1/EGPRS module based on the Quectel BG96 with a standard PCI Express® form factor (Mini PCIe). It offers a maximum data rate of 375Kbps downlink and 375Kbps uplink.
Reference: DWM22052402
RAK2011 is Arduino shield board powered by the Quectel BG96 modem chipset. It supports 2G/EGPRS, 4G/LTE Cat-M1 (eMTC), Cat-NB1 (Nb-IoT), as well as GPS.
Reference: DWM23010801
RAK2171 is RAK latest LoRaWAN GPS tracking device. It comes in a small form factor with rechargeable battery and tracking and configuration application, available for iOS and Android devices.
Reference: DWM23010802
RAK7431 is a Modbus RS485 to LoRaWAN® bridge designed for industrial applications. The device relays Modbus data using the LoRaWAN network as a means of wirelessly transmitting to and from the end devices.
Reference: DWM23010803
RAK7432 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 4-20mA signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM23010804
RAK7434 Bridge is an analog to digital LoRaWAN® bridge designed for industrial applications. The device converts analog values received from sensors using a 0-5V signal to digital values and transmits them to the LoRaWAN network.
Reference: DWM23010901
RAK7268V2 8 channels WisGate Edge Lite 2 LoRaWAN Indoor Gateway OpenWRT software supports Can integrate with both private (ChirpStack) and public (TTN) network servers.
Reference: DWM23091101
The BG96 is an LTE Cat M1/Cat NB1/EGPRS module which is compatible with Quectel’s LTE Standard module EG91/EG95, LPWA module BC95-G/BG95, UMTS/HSPA module UG95/UG96 and GSM/GPRS module M95.
Reference: DWM23051901
RAK3272S Breakout Board is specifically designed to allow easy access to the RAK3172 low power long range LoRawan module the board in order to simplify development and testing.
Reference: DWM23051902
The RAK3172-E is a Evaluation Board for RAK3172 Module It is based on RAK3372 WisBlock Core PCB which is compatible to the RAK19007 base board.
Reference: DWM23070301
LoRaWAN Field Tester which helps to LoRaWAN network coverage it's easy to investigate whether the required area of sensor nodes is covered by gateways.
Reference: DWM23072801
RAK2270 is a sleek sticker tracker for LoRaWAN® designed like a label, making it easy to attach to any product. It offers real-time location tracking through the Helium network server's advanced features.
Reference: DWM23072803
Indoor Location Tracker Kit with RAK5860 NB-IOT module Quectel BG77 with LoRaWAN, NB-IoT The Kit is providing all components to build a UWB based indoor tracking and location system It includes motion sensors and four UWB modules.
Reference: DWM23072802
Indoor Location Tracker Kit with RAK13101 GSM module Quectel MC20CE with LoRaWAN, LTE-M The Kit is providing all components to build a UWB based indoor tracking and location system .It includes motion sensors and four UWB modules.
Reference: DWM23080101
The RAK Agriculture Kit with RAK5860 NB-IOT module Quectel BG77 with LoRaWAN, NB-IoT The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
Reference: DWM23080102
The RAK Agriculture Kit with RAK13101 GSM module Quectel MC20CE with LoRaWAN, GSM The Kit includes a range of sensors designed specifically for agriculture, including soil, light, and environmental sensors, as well as common interfaces like SDI-12, 4-20 mA, and RS485, providing a versatile platform for monitoring and controlling agricultural conditions.
