All best sellers

CM4 Raspberry pi Computer module 4 without wireless

DWM22091205

CM4 Raspberry pi Computer module 4 without wireless check out the full range of Compute Modules 4.

Part Number
$125.00
Tax excluded
Quantity

Description

The Raspberry Pi Compute Module 4 (CM4) is a System on Module (SoM) containing processor, memory, eMMC Flash, and supporting power circuitry. These modules allow a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition, these modules have extra IO interfaces over and above what is available on the Raspberry Pi boards, opening up more options for the designer.

The design of the CM4 is loosely based on the Raspberry Pi 4 Model B, and for cost-sensitive applications it can be supplied without the eMMC fitted; this version is called the Raspberry Pi Compute Module 4 Lite (CM4Lite). While previous generations of the Compute Module have all shared the same DDR2-SODIMM-mechanically-compatible form factor, the new CM4 and CM4Lite are different. The electrical interface of the CM4 is via two 100-pin high density

connectors, and the new physical form factor has a smaller footprint overall when the connectors are taken into account.

This change is due to the addition of new interfaces: an additional second HDMI, PCIe, and Ethernet. The addition of these new interfaces, especially PCIe, would not have been possible while preserving the previous form factor.

Features

Key features of the CM4 are as follows:

• Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

• Small Footprint 55mm × 40mm × 4.7mm module

• 4 × M2.5 mounting holes

• H.265 (HEVC) (up to 4Kp60 decode), H.264 (up to 1080p60 decode, 1080p30 encode)

• OpenGL ES 3.0 graphics

• Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC (see Appendix B)

• Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC flash memory (see Appendix B)

   ◦Peak eMMC bandwidth 100MBps (four times faster than previous Compute Modules)

• Gigabit Ethernet PHY supporting IEEE 1588

• 1 × PCIe 1-lane Host, Gen 2 (5Gbps)

• 1 × USB 2.0 port (high speed)

• 28 × GPIO supporting either 1.8V or 3.3V signaling and peripheral options:

   ◦Up to 5 × UART

   ◦Up to 5 × I2C

   ◦Up to 5 × SPI

   ◦1 × SDIO interface

   ◦1 × DPI (parallel RGB display)

   ◦1 × PCM

   ◦Up to 2× PWM channels

   ◦Up to 3× GPCLK outputs

• 2 × HDMI 2.0 ports (up to 4Kp60 supported)

• MIPI DSI:

   ◦1 × 2-lane MIPI DSI display port

   ◦1 × 4-lane MIPI DSI display port

• MIPI CSI-2:

   ◦1 × 2-lane MIPI CSI camera port

   ◦1 × 4-lane MIPI CSI camera port

• 1 × SDIO 2.0 (CM4Lite)

• Single +5V PSU input.

Useful Link:

Raspberry Pi Compute Module 4 product brief

Raspberry Pi Compute Module 4 datasheet

Compute Module 4 STEP file

Compute Module 4 Lite (without eMMC) STEP file

Product Details
DWM22091205
100 Items
You might also like
16 other products in the same category:

Reference: DWM22081701

HNT SNR full frequency transmitter snr jammer snr suppressor

HNT SNR full frequency transmitter is to simultaneously transmit the weak dynamic interference energy of 8 witness bands of helium to suppress the SNR value of HNT miner witness, further improve the authenticity of SNR simulation, reduce the probability of blacklisting.

Price $300.00
More
In stock

Reference: DWM22091101

BPI-R3 OpenWRT Router Main board base on MediaTek MT7986

BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard, it is a very high-performance open-source router development board, support Wi-Fi 6/6E 2.4G Wi-Fi use MT7975N and 5G Wi-Fi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.

Price $130.00
More
In stock

Reviews

Write your review

CM4 Raspberry pi Computer module 4 without wireless

CM4 Raspberry pi Computer module 4 without wireless check out the full range of Compute Modules 4.

Write your review

Follow us on Facebook