- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The E28-2G4M20S 2.4GHz SPI +20dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1280 from SEMTECH, adopts LoRa and FLRC And GFSK Modulation.
The E28-2G4M20S is a 2.4GHz bluetooth module designed by Chengdu Ebyte.The IC SX1280 features multiple physical layers and various modulating methods such as LoRa, FLRC and GFSK. The special modulating and processing methods enable longer operating range with LoRa and FLRC modulating, and the GFSK method covers BLE protocol.
RF Parameter | Value |
Remark |
Working frequency |
2400~2500 MHz |
Default: 2.4GHz (52MHz oscillator) |
Transmitting power | 20 dBm |
About 100mW |
Receiving sensitivity | -132 dBm |
Air data rate: 125kbps |
Air data rate | 0.125M~2Mbps |
Default: 125kbps |
Test distance | 6000m |
In open and clear air, with maximum power, 5dBi antenna gain, height of 2m, air data rate: 125kbps |
Hardware Parameter | Value |
Remark |
Size |
26.5 * 15 mm | |
Antenna type | IPEX / PCB | |
Communication interface | SPI |
|
Package | SMD |
|
Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
Power supply |
1.8 | 3.3 | 3.6 | V | |
Communication level | 1.8 | 3.3 | 3.6 | V | |
Transmitting current |
130 |
140 | 150 | mA | 20dBm(100mW) |
Receiving current | 9 |
10 | 11 | mA | |
Sleep current | 1 | 2 | 3 | μA | |
Operating temperature | -40 | 20 |
+85 | ℃ | |
Operating humidity | 10 | 60 |
90 | % | |
Storage temperature | -40 | 20 |
+125 | ℃ |
Pin No. |
Pin Item | Pin Direction | Pin Application |
1 | VCC | - |
Power supply, 1.8V ~3.6V (recommend to add external ceramic filter capacitor) |
2 | GND | - |
Ground, connecting to power source reference ground |
3 | MISO_TX | Output |
SPI data output pin,can be used as UART transmitting pin |
4 | MOSI_RX | Input |
SPI data input pin,can be used as UART receiving pin |
5 | SCK_RTSN | Input |
SPI clock input pin,can be used as UART request transmitting pin |
6 | NSS_CTS | Input |
Module chip selection pin, used to start a SPI communication; and can be used as UART clearing transmitting pin |
7 | GND | - |
Ground, connecting to power source reference ground |
8 | RX_EN | Input |
LNA controlling pin. Valid under high level |
9 | TX_EN | Input |
PA controlling pin. Valid under high level |
10 | GND | - |
Ground, connecting to power source reference ground |
11 | NRESET | Input |
Chip reset initiation input pin, valid under low level, built-in 50k pull-up resistor |
12 | BUSY | Output |
Status indication (refer to SX1280 Datasheet) |
13 | DIO1 | Input/Output |
Configurable general IO interface (refer to SX1280 Datasheet) |
14 | DIO2 | Input/Output |
Configurable general IO interface (refer to SX1280 Datasheet) |
15 | DIO3 | Input/Output |
Configurable general IO interface (refer to SX1280 Datasheet) |
16 | GND | - |
Ground, connecting to power source reference ground |
n No
Reference: DWM14073001
Brand: Semtech
APC340 LoRa series rf module is built in RFIC sx1278 and sx1276 which can work on 433MHz,470MHz ,868MHz,915MHz 20dBm Ultra Long Range Transceiver Module with LoRa spread spectrum modulation.
Reference: DWM15123001
Brand: Semtech
HM-TRLR-S series are operating at 433MHz, 868MHz, 915MHz low cost, high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM16092701
RFM98PW/ RFM95PW which are Enhanced Power Long Range Transceiver Module.the available versions is RFM98PW 433MHz, and 868MHz,915MHz for RFM95PW.
Reference: DWM16112801
DWM-LoRa1276F30 is a 500W high power wireless transceiver module, which integrates SemtechRF transceiver chip SX1276. There are 868MHz and 915MHz for avaialble options.
Reference: DWM16112802
DWM-LoRa1278F30 is a 500W high power wireless transceiver module, which integrates SemtechRF transceiver chip SX1278. There are 433MHz and 470MHz for avaialble options.
Reference: DWM15091402
Brand: Semtech
The RFM92W /RFM95W transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech serice LoRa chipset,usually build for the ARM application.
Reference: DWM16050803
Brand: Semtech
HM-TRLR-Dseries are operating at 433MHz, 868MHz, 915MHz low cost, high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM23091501
YTX1276/YTX1278 which is based on the SX1276 and SX1278 LoRa chipset which can be option for the different center frequency with 433MHz/ 868MHz/ 915MHz a LoRa Wireless module.
Reference: DWM20061601
Brand: Semtech
DWM-RAK4200 LPWAN Evaluation Board is a WisBlock product consisting of RAK4200 LPWAN Module and RAK5005 WisBase includes an STM32L071 MCU and SX1276 LoRa® chip that complies with the LoRaWAN® 1.0.2 protocols.
Reference: DWM18103005
USD74/pcs MOQ100 The OLG01 is an Water proof outdoor setting open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM20030404
The DWM-32u4 with LoRa RFM95 IOT Board consists of the mega24u and the wireless transport module RFM95 is used in remote control, telemetry, remote communication equipment, robot control, wireless communications.
Reference: DWM18110601
Brand: Semtech
RFM98W 433MHz,470MHz transceivers feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech SX1278 chipset with the application for ARM meters.
Reference: DWM17120402
LoRa32u4 RA02 is a light and low consumption board based on the Atmega32u4 and SX1278 433MHz LoRA module.
Reference: DWM18050301
DWM-RAK813 LoRa and Bluetooth Module nRF52832 and LoRa SX1276 core chip which is a combination of the BLE and LoRa of the relay node module.
Reference: DWM20052801
The DWM-RAK7204 is an LPWAN node that serves as an environmental monitoring station. The high-precision sensors, can measure changes in temperature, humidity, gas pressure and provide an indoor air quality index.
Reference: DWM19051701
Brand: Semtech
DWM-LoRa1280 /LoRa1281 is built with Semtech SX1280 and SX1281 Chipset it's measure the range between the transmitter and receiver.
Reference: DWM17083102
Brand: Semtech
$4.5/pcs MOQ100/pcs RFM92W / RFM95W 868MHz /915MHz LoRa transceiver RF module feature the LoRa TM long range rf module which core chipset are the semtech serice LoRa chipset,usually build for the ARM application.
Reference: DWM22072103
LA66 is a ready-to-use module that includesLoRaWAN v1.0.4 protocol and also supports open-source peer-to-peer LoRa Protocol for the none-LoRaWAN application.
Reference: DWM20053001
Brand: Semtech
The DWM-RAK4260 LPWAN Module is based on Microchip’s ATSAMR34J18B integrating a 32-bit ARM Cortex -M0+ MCU with a LoRa Transceive, provides a number of highly configurable peripherals (configurable as I2C/SPI/UART interfaces).
Reference: DWM18122302
Brand: Semtech
Free Shipping DWM-1278S 433MHz /470MHz sx1278 LoRa transceiver RF module compatible with RFM98W feature the LoRaTM long range module build by the semtech SX1278 chipset with the application for ARM meters.
Reference: DWM18120402
Brand: Semtech
DWM-1278S 433MHz /470MHz sx1278 LoRa transceiver RF module compatible with RFM98W feature the LoRaTM long range module build by the semtech SX1278 chipset with the application for ARM meters.
The E28-2G4M20S 2.4GHz SPI +20dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1280 from SEMTECH, adopts LoRa and FLRC And GFSK Modulation.