Reference: DWM18122301

Brand: Semtech

Free Shipping DWM-LJ1295 868MHz /915MHz sx1276 LoRa transceiver RF module

Free Shipping DWM-LJ1295 868MHz /915MHz  sx1276  LoRa transceiver RF module compatible with RFM95W  which core chipset are the semtech SX1276 LoRa chipset,usually build for the ARM application.

Reference: DWM19090601

LM502 SX1262 22dBm Lo RaWAN Module with a 32bits ARM Cortex MCU

The LM502 use the newest LoRa Modem SX1262 which provide high transmit power for ultra long range, ultra low power communication for LPWAN application.

Reference: DWM17120401

LoRa32u4 II Lora SX1276 868MHZ /915MHz Development Board for Arduino

LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and SX1276 868MHZ /915MHz LoRA module.

Reference: DWM17120403

0.96 OLED Display ESP32 WIFI Bluetooth SX1276 868MHZ /915MHz Lora iot Development Board for Arduino

0.96 OLED Display ESP32 WIFI Bluetooth Lora iot Development Board Transceiver SX1276 868MHZ 915MHZ IOT for Arduino Smart Home.

Reference: DWM20053103

Brand: Semtech

DWM-RAK4600 LPWAN Evaluation Board

The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.

Reference: DWM19062801

ESP32-WROOM-32D/U low-power Wi-Fi+BT+BLE SOC IOT Solution module

ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. 

Reference: DWM22082503

RAK11300 PI RP2040 chip and sx1262 LoRawan Module

RAK11300 is based on the Raspberry Pi RP2040 chip and SX1262 RF transceiver it's complies with Class A & C of LoRaWAN 1.0.2 specifications.

Reference: DWM22062302

LoRaWAN Weather Monitor Development kit

This Kit consists of a Sensor Node to measures air temperature, air humidity, barometric pressure, and environment luminosity values. Transmitting data periodically to a LoRaWan® server.

Reference: DWM23072209

SE01-LB LoRaWAN Soil Moisture & EC Sensor Nodes base on the LSN50-V3

LSE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture supports BLE configure and wireless OTA update It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.

Reference: DWM18051403

HPD13AP /HPD14AP +30dBm Enhanced Power LoRa Long Range Transceiver Module

HPD13AP /HPD14AP +30dBm Enhanced Power LoRa Long Range Transceiver Modulethe available versions are 433MHz, 470MHz, 868MHz,915MHz .

Reference: DWM18011801

DWM-RAK831 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module

DWM-RAK83 433MHz/ 868MHz/ 915MHz SX1301 LoRa/ LoRaWAN Gateway Module combine a host system like Raspberry Pi or WisAP(OpenWRT based) or WisCam to help you realize the whole Lora system development.

Reference: DWM21010103

LSN50V2-D20 LoRaWAN Temperature Sensor Nodes

The LSN50v2-D20 is a LoRaWAN Temperature Sensor for Internet of Things solution. It can be used to measure the temperature of air, liquid or object, and then upload to IoT server via LoRaWAN wireless protocol.

Reference: DWM20053001

Brand: Semtech

DWM-RAK4600 LoRa module integrates SX1276 and nRF52832 MCU support LoRaWAN and BLE 5.0

DWM-RAK4600 LPWAN Module includes an nRF52832 MCU and an SX1276 LoRa® chip. It has an ultra-low power consumption of 2.0uA in sleep mode, high LoRa® output power up to 20dB max in work mode, and BLE output power up to 4dBm.

Reference: DWM20053104

Brand: Semtech

DWM-RAK4260 Breakout Module

DWM-RAK4260 Breakout Module is specifically designed to allow easy excess to the pins on the module in order to simplify development and testing. 

Reference: DWM20031101

Brand: Semtech

DWM-SL1276 868MHz /915MHz sx1276 LoRa transceiver RF module

DWM-SL1276 868MHz /915MHz  sx1276  LoRa transceiver RF module compatible with RFM95W  which core chipset are the semtech SX1276 LoRa chipset,usually build for the ARM application.

Reference: DWM21031501

LAQ4 LoRaWAN TVOC and eCO2 Temperature & Humidity Air Quality Sensor Nodes

LAQ4 is a LoRaWAN end sensor nodes designed to measure the surrounding environment parameters include: TVOC(Total Volatile Organic Compound), eCO2(equivalent CO2), temperature and relative air humidity.