Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
LT-22222-L is the Dragino LT series I/O Modules, are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
The Dragino LT series I/O Modules are Long Range LoRa I/O Controllers. It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input, and digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.
The LT I/O Controllers allow users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
The LT I/O Controllers are aiming to provide an easy and low-cost installation by using LoRa wireless technology.
The use environment includes:
1) If the user’s area has LoRaWAN service coverage, they can just install the I/O controller and configure it to connect to the LoRaWAN provider via wireless.
2) The user can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless.
Reference: DWM20022601
LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node with external antenna,It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.
Reference: DWM21051607
The Dragino RS485-BL is an RS485 / UART to LoRaWAN Converter. It converts the RS-485 and UART devices into a LoRaWAN wireless network, simplifying the IoT installation and reducing the installation/maintenance cost.
Reference: DWM22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM24011402
The SPH01-NB is NB-IoT Soil pH Sensor for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level.
Reference: DWM25062901
The CS01-LB is a 4-channel current Sensor Converter. It can convert the reading from the current sensors and upload it to the IoT server via the LoRaWAN Network. It can be used to monitor the machine's running status and analyze power consumption trends.
Reference: DWM23030701
MH-Z19E NDIR infrared gas module Built-in temperature compensation; and it has UART output and PWM output It uses the principle of non-dispersive infrared (NDIR) to detect CO2 in the air and has good selectivity. No oxygen dependence, long life, etc.
Reference: DWM23070103
LHT65N-PIR built-in Temperature & Humidity sensor and has an external PIR Probe it can detect environment Temperature & Humdity also detects People Activity via PIR probe and them send these info to LoRaWAN IoT Server.
Reference: DWM18072401
LG02-S is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: DWM22082601
The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has a USB Type-C sensor connector to connect to external sensors such as an external temperature sensor.
Reference: DWM25021902
The SDI-12-LS is a solar-powered SDI-12 to LoRaWAN Converter designed for Smart Agriculture solutions.
Reference: DWM25102402
DR-IL-6P Illumination Sensor for WSC2-Compact-LS Weather Station Kit.
Reference: DWM23072203
DDS75-LB LoRaWAN Distance Detection Sensor, which supports BLE configuration and wireless OTA update, is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
Reference: DWM25021901
The TC01/TC11-LB is a LoRaWAN Thermocouple Converter that measures the industrial environment temperature and then uploads it to the IoT server via the LoRaWAN network.
Reference: DWM24090501
The LDS40-LS is Powered by a solar panel + li-on battery with a LiDAR ToF (Time of Flight) Distance Sensor that supports BLE configuration and wireless OTA update can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection.
Reference: DWM22092803
WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.
Reference: DWM22092801
WSS-01 RS485 Rain Gauge is a weather monitor instrument to monitor rainfall.
Reference: DWM21072702
The N95S31B SHT31 NB-IoT Outdoor Temperature and Humidity Sensor be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: DWM21051607
The Dragino RS485-BL is an RS485 / UART to LoRaWAN Converter. It converts the RS-485 and UART devices into a LoRaWAN wireless network, simplifying the IoT installation and reducing the installation/maintenance cost.
Reference: DWM23122601
SDI-12-NB is an SDI-12 to NB-IoT Converter that supports BLE configuration and OTA update and is designed for Smart Agriculture sensors and Weather Station.
LT-22222-L is the Dragino LT series I/O Modules, are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
