Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Low cost DWM-NRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible module.
Product Contents:
- 1 pieces NRF24L01+ modules
- 1 piece pink anti-static foam protecting pins of modules
Specifications:
- The NRF24L01+ is a 2.4GHz ISM band transceiver.
- Includes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware.
- Communication range up to 329 feet (100 meters) in ideal conditions.
- A host microcontroller can communicate and configure theNRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
- The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the NRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the NRF24L01+ module.
- The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
- Ultra low power consumption as low as 11.3mA transmitting, 13.5 receiving at 2Mbps, 900nA in power down, and 26uA in standby.
- Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses GaussianFrequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
- The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
- Auto-acknowledge and auto-retransmit.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM14071701
Dupont cable 20 cm 40pcs / Row male-male, male-female, and female-female.
Reference: DWM14101901
Crown YZW A123 lithium battery DIY essential 22AWG silicone wire balancing charge plug 2.54XH.
Reference: DWM17082405
WT51822-S4AT nRF5182 BLE 4.1 Low Energy Bluetooth Module with PCB antenna high performance ,low power radio transmit and receive system module use Nordic BLE 4.1 nRF51822-QFAA as the controller chips.
Reference: DWM17060702
DWM-DL-24D8 TI CC2500 Low Power Control 2.4GHz Transceiver RF Module which is built by TI CC2500 rf chipset Add GP00,GP02 pin for Low power control application .Interface module adopts SMD, DIP type.
Reference: DWM23072601
The E72-2G4M05S1B is a small SMD Bluetooth wireless module independently developed by Ebyte based on Texas Instruments' CC2640.
Reference: DWM23072503
E72-2G4M02S2B is a small-size SMD RF module BLE Bluetooth wireless module independently developed based on CC2640 produced by Texas Instruments (TI)。CC2640 chip integrates 128KB intra-system programmable flash and 8KB buffer static RAM (SRAM) and different 2.4GHz wireless communication protocols
Reference: DWM23072502
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
Reference: DWM17060703
DWM-DL-24PA is 20dBm enhance power output Low cost 2.4GHz Transceiver RF Module which is built by TI CC2500 rf chipset.Interface module adopts SMD, DIP type.
Reference: DWM14032203
RFM75 / RFM75P is a ISM frequency band at 2400 - 2483.5 MHz in the world wide The module features low cost, small size, high stability and good consistency.
Reference: DWM17060704
DWM-DL-24A TI CC2500 Low cost with PCB Antenna 2.4GHz Transceiver RF Modulewhich is built by TI CC2500 rf chipset.Interface module adopts SMD, DIP type.
Reference: DWM23072504
The E72-2G4M20S1E is a multi-protocol 2.4GHz SMD wireless SoC module independently developed by Ebyte based on TI's CC2652P. The transmit power is 20dBm. It integrates an ARM microcontroller and high-performance wireless transceiver.
Reference: DWM16022501
FCC Passed Wireless Transceiver Module RF24L01F20 adopts Nordic's RF chip nRF24L01+ and high efficiency RF amplifier. The feature of high data rate (maximum 2Mbps ), good sensitivity (-102 dBm) and high output power ( +20dBm ).
Reference: DWM14060702
DWM-DMX512-KB wireless receiver/transmitter transmits standard DMX512 protocol, using in Stage lighting, temporary stage performances, urban lighting system, theme parks, dance halls,bars.
Reference: DWM23072702
E104-BT51 built-in TI SoC CC2640R2F UART to BLE Slave Module is a serial port to BLE Bluetooth slave node module that supports Bluetooth protocol version 5.0. It is small in size and low in power consumption. It works in the 2.4GHz frequency band.
Reference: DWM23072603
E72-2G4M05S1A is small SMD Cortex-M3 Zigbee and 6LoWPAN wireless module built-in with TI SoC CC2630 working at 2.402～2.480GHz, with 5dBm maximum power and PCB antenna&IPEX interface. It has super low RF & MCU current and low power consumption.
Reference: DWM17060701
DWM-DL-24D TI CC2500 Small size Low cost 2.4GHz Transceiver RF Module which is built by TI CC2500 rf chipset.Interface module adopts SMD, DIP type.
Reference: DWM23072501
E72-2G4M05S1G is a self-developed, small-size, SMD, bluetooth wireless module based on CC2642 of Texas Instruments The CC2642R integrates 352KB of in-system programmable flash memory, 88KB of buffered static RAM (SRAM) and BLE 5.2 wireless communication protocol.
Reference: DWM20010401
DWM-DL-24TRGC TI CC2500 Low Power Control 2.4GHz Transceiver RF Module which is built by TI CC2500 rf chipset Add GP00,GP02 pin for Low power control application .Interface module adopts SMD, DIP type.
Reference: DWM23072401
The E79 is an RF SoC module based on the TI CC1352P chip. It is a dual-band ARM RF SoC module with a maximum transmission power of 20dBm at sub-1GHz and 5dBm at 2.4GHz.
Low cost DWM-NRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible module.
