Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The CMT2213AW is an ultra low power, high performance, low-cost (G)FSK stand-alone RF receiver for various 300MHz to 480 MHz wireless applications.
Descriptions
The CMT2213AW is an ultra low power, high performance, low-cost (G)FSK stand-alone RF receiver for various 300 to 480 MHz wireless applications. It is part of the CMOSTEK NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. An embedded EEPROM allows the frequency, symbol rate and other features to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock products of 315/433.92 MHz are available for immediate demands with no need of EEPROM
programming. The CMT2213AW operates from a supply voltage of 1.8 V to 3.6 V, when it is always on, it consumes only 4.2 mA current while achieving -120 dBm receiving sensitivity. It consumes even less power when working in duty-cycle operation mode via the built-in sleep timer. The device provides demodulated data, power-on reset output as well as a system clock output for use by an external microcontroller or decoder. CMT2213AW receiver together with the CMT2213AW transmitter enables an ultra low cost RF
Features
Embedded EEPROM
-Very Easy Development with RFPDK
-All Features Programmable
Frequency Range: 300 to 480 MHz
FSK, GFSK Modulation
Symbol Rate: 0.1 to 100 ksps
Sensitivity: -120 dBm
3-wire SPI Interface for EEPROM Programming
Stand-Alone, No External MCU Control Required
Configurable Duty-Cycle Operation Mode
Supply Voltage: 1.8 to 3.6 V
Low Power Consumption: 4.2 mA
Low Sleep Current
-60 nA when Sleep Timer Off
-440 nA when Sleep Timer On
RoHS Compliant
16-pin QFN 3x3 Package
Applications
Low-Cost Consumer Electronics Applications
Home and Building Automation
Infrared Receiver Replacements
Industrial Monitoring and Controls
Remote Automated Meter Reading
Remote Lighting Control System
Wireless Alarm and Security Systems
Remote Keyless Entry (RKE)
UseFul Link:
Click here to view CMT2213AW datasheet
CMOSTEK RFPDK Setup(RF Products Development Kit PC Software)-For Developing stage
CMT211xA-221xA One-Way RF Link Development Kits Users Guide
AN128 CMT2213AW Configuration Guideline(RF PDK Users Guide)
CMOSTEK WriterConfig V1.0.3 Beta(RF Write config PC software)-For mass production stage
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM15081901
The USB Programmer is the configuration interface for the user to program the configuration to CMOSTEK RF procducts with the RFPDK. It connects the module containing RF products via EM-Connector and connects the PC via USB cable. 3 LEDs are available to indicate the working status of the USB programmer.
Reference: DWM15082001
The CMT2113AW is an ultra low-cost, highly flexible, high performance, single-chip (G)FSK transmitter for various 240 to 480 MHz wireless applications.
Reference: DWM22093002
CMT2300A is an ultra-low power, high performance, OOK (G) FSK RF transceiver suitable for a variety of 140 to 1020 MHz wireless applications.
Reference: DWM22092703
he ATECC608B is a secure element from the Microchip CryptoAuthenticationTM portfolio with advanced Elliptic Curve Cryptography (ECC) capabilities.
Reference: DWM20030802
Brand: Semtech
Sx1276 /Sx1278 137MHz to 1020MHz LoRa® Long Range Low Power Transceiver Chipset feature the LoRa® long range modem that provides ultra-long range spread spectrum communication.
Reference: DWM15081803
The CMT2150AW is HopeRF CMT single-chip, highly flexible, high performance, OOK RF transmitter with 1920, 1527 and 2262 embedded data encoder ideal for 240 to 480 MHz wireless applications.
Reference: DWM15081801
The CMT2110AW is HopeRF CMT Series ultra low-cost, highly flexible, high performance, single-chip OOK transmitter for various 240 to 480 MHz wireless applications.
Reference: DWM15081802
The CMT2210AW is HopeRF CMT Series an ultra low power, high performance, low-cost OOK stand-alone RF receiver for various 300 to 480 MHz wireless applications.
Reference: DWM20030801
The ESP8266EX delivers highly integrated Wi-Fi SoC solution to meet users’continuous demands for efficient power usage, compact design and reliable performance in the Internet of Things industry.
Reference: DWM15101101
The E931.96 is an ultra-low power motion detector controller integrated circuit. The device is ideally suited for battery operated wireless motion sensors that make use of an MCU for handling com munication.
Reference: DWM15082001
The CMT2113AW is an ultra low-cost, highly flexible, high performance, single-chip (G)FSK transmitter for various 240 to 480 MHz wireless applications.
Reference: DWM22093001
CMT2380F64 integrates a 32-bit ARM Cortex®-M0 core with a super low power consumption RF transceiver. It is a high efficiency super-low power MCU, applying for wireless application of (G) FSK、(G) MSK and OOK transceiver from 127 to 1020MHz.
Reference: DWM15081804
The CMT2250AW is HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 embedded data Decoder and 4 data output pins for various 300 to 480 MHz wireless applications.
Reference: DWM15081901
The USB Programmer is the configuration interface for the user to program the configuration to CMOSTEK RF procducts with the RFPDK. It connects the module containing RF products via EM-Connector and connects the PC via USB cable. 3 LEDs are available to indicate the working status of the USB programmer.
Reference: DWM15081805
The CMT2251AW is a HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK RF receiver, with 1920, 1527 and 2262 data decoder and 1 PWM output pin for various 300 to 480MHz wireless applications.
Reference: DWM15081806
The CMT2157AW is HopeRF CMT single-chip, highly flexible, high performance, OOK/(G)FSK RF transmitter with 1920, 1527 and 2262 data encoder ideal for 240 to 960 MHz wireless applications.
Reference: DWM15081807
The CMT2257AW is HopeRF CMT single-chip, ultra low power and high performance device that consists of an OOK/(G)FSK RF receiver, with 1920, 1527 and 2262 embedded data Decoder and 4 data output pins for various 300 to 960 MHz wireless applications.
Reference: DWM22092702
ASR6601SE is a general LPWAN Wireless Communication SoC, with integrated RF Transceiver, Modem and a 32-bit RISC MCU. The MCU uses ARM Cortex M4, with 48 MHz operation frequency.
The CMT2213AW is an ultra low power, high performance, low-cost (G)FSK stand-alone RF receiver for various 300MHz to 480 MHz wireless applications.
