- New
Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The WSC2-Compact-LS is Dragino's 3rd generation Weather Station Kit which includes a LoRaWAN transmitter, a 3 in 1 sensor for temperature/humidity/air pressure , Illuminance sensor and rain gauge .
The WSC2-Compact-LS is Dragino's 3rd generation Weather Station Kit . It is designed for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate.
The wireless transmitter (WSC2-Compact-LS) and the sensors of the 3rd generation weather station kit are low power and no need extra power supply or MQTT. It target the provide an easy installation method and low cost to provide a Long Range Wireless weather station kit.
The Weather Station Kit includes a LoRaWAN transmitter, a 3 in 1 sensor for temperature/humidity/air pressure , Illuminance sensor and rain gauge .
The 3 in 1 sensor can measure below values: Temperature, Humidity, Air pressure. The transmitter use I2C interface to communicate with the weather station. It also has a pulse count input that can be used to connect a tipping bucket Rain Gauge.
A lightweight, self-powered version that includes a built-in solar panel and battery. It is optimized for measuring key weather parameters and is ideal for quick and easy deployment in farms, greenhouses, and remote research sites.
LoRaWAN 1.0.3 Class A
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Support external 3 in 1 weather sensor (DR-THP-6P): Temperature, Humidity, Air Pressure
Support interrupt t Rain Gauge (DR-RG-6P) and Illuminance Sensor (DR-IL-6P)
Easy to install, no need for additional MPTT or solar panels
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
AT Commands to change parameters
IP66 Waterproof Enclosure
3000mAh Rechargeable Li-ion battery
Airport
Port
Meteorological
Agriculture
Rain-bearing diameter: 200mm; sharp angle of blade: 40° ~ 45°
Range: default 0~100mm/day
Resolution: 0.1mm
Rain intensity range: 0.01~4mm/min
Output signal: pulse signal
Cable specifcation: 2 meters 2 wire
system (pulse signal)
Temperature:
Range: -40 ~ 80°C
Accuracy: ±0.2 @ 0-90 °C
Resolution: 0.1°C
Long Term Shift: <0.03 °C/yr
Humidity:
Range: 0 ~ 99.9% RH
Accuracy: ± 2%RH ( 0 ~ 100%RH)
Resolution: 0.01% RH
Long Term Shift: < 0.25 %RH/yr
Air Pressure:
Range: 300 ~ 1100hPa
Accuracy: ±
0.1kPa@25°C
101kPa
Base on BH1750 Illumination Sensor
Range: 0 ~ 65535 lx
Resolution: 1 lx
Operating Range: -40 °C ~ 85 °C
Cable Length : 50cm
Package Includes:
WSC2-Compact-LS Transmiter
Wireless Transmitter : WSC2-Compact-LS-XX : DR-THP-6P , DR-IL-6P , DR-RG-6P
XX : the default frequency band
AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band
EU433: LoRaWAN EU433 band
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
CN470: LoRaWAN CN470 band
Please note that the WSC2-Compact-LS series only includes the wireless transmitter, the 3 in 1 sensor, Illuminance sensor and rain guage need to be purchased separately.
Reference: DWM22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM25102401
The DR-THP-6P integrated temperature/humidity/air pressure detection which work with the WSC2-Compact-LS LoRaWAN Weather Station Kit.
Reference: DWM25102402
DR-IL-6P Illumination Sensor for WSC2-Compact-LS Weather Station Kit.
Reference: DWM25103001
The DR-RG-6P Rain Gauge is specifical for WSC2-Compact-LS Weather Station Kit.
Reference: DWM25022701
The MDS120-LS is a LoRaWAN Microwave Radar distance sensor with a Measure Range: of 15 ~ 1200cm supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM25102202
The LC01 is a LoRaWAN®-enabled relay controller designed for smart control of electrical appliances and lighting.
Reference: DWM25070101
The SE0X-LB is a LoRaWAN soil moisture and EC Sensor for IoT agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. It detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the LoRaWAN IoT Server.
Reference: DWM23101801
WSC2-LB is the Main Process Unit for Weather Station solution which is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.
Reference: DWM25022401
The DDS20-LS Solar-powered LoRaWAN Ultrasonic liquid level sensor uses a non-contact method to measure the height of liquid in a container without opening it and send the value via the oRaWAN network to the IoT Server.
Reference: DWM23072204
The DDS45-LB is a LoRaWAN Distance Detection Sensor supports BLE configure and wireless OTA update which is usedultrasonic sensing technology for distance measurement for Internet of Things solution.
Reference: DWM24090202
The PS-LS-D sensors are powered by solar power + li-on battery with a Differential Pressure Sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: DWM25063001
The CS01-LS is a solar-powered 4-channel current Sensor Converter. It can be used to monitor the machine's running status and analyze power consumption trends.
Reference: DWM25022801
The DDS04-LS is a Solar-powered LoRaWAN 4-Channels Distance Sensor that can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
Reference: DWM25030402
The CPL03-LB is a Solar-Powered LoRaWAN Contact Sensor that detects open/close status and uplinks to the IoT server via the LoRaWAN network. Users can see the dry contact status, open time, and open counts in the IoT Server.
Reference: DWM23122501
TS01-LB is an outdoor LoRaWAN Tilting Sensor which is specially designed for detecting the angle of trees, buildings or large scale equipment measures pitch and roll angle and converts to LoRaWAN wireless data and sends to IoT platform via LoRaWAN network.
Reference: DWM25021501
The D22-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use The temperature sensor used in D22-LS can measure -55°C ~125°C with accuracy ±0.5°C (max ±2.0 °C).
Reference: DWM24081201
PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. PB01 transfers the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.
Reference: DWM23072201
The SW3L-LB is a new LoRaWAN Outdoor water Flow Sensor that supports BLE configuration and wireless OTA update which is used to detect water flow volume and uplink to the IoT server via the LoRaWAN network it can be used for indoor and outdoor use.
Reference: DWM23122602
LA66 USB LoRaWAN Adapter v2 is designed to fast turn USB devices to support LoRaWAN wireless features which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
Reference: DWM23070102
D23-LB is a LoRaWAN Temperature Sensor with 3 x DS18B20 supports BLE configure and wireless OTA update.
The WSC2-Compact-LS is Dragino's 3rd generation Weather Station Kit which includes a LoRaWAN transmitter, a 3 in 1 sensor for temperature/humidity/air pressure , Illuminance sensor and rain gauge .