Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM17111002
LoRa Antenna-433MHz High Gain internal aerial piamater FPC Antenna with IPEX connctor.
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
The SDI-12-LS is a solar-powered SDI-12 to LoRaWAN Converter designed for Smart Agriculture solutions.
The SDI-12 (Serial Digital Interface at 1200 baud) is an asynchronous serial communications protocol for intelligent sensors that monitor environment data. SDI-12 protocol is widely used in Agriculture sensors and Weather Station sensors.
SDI-12-LS has an SDI-12 interface and supports 12v output to power an external SDI-12 sensor. It can get the environment data from the SDI-12 sensor and send out the data via LoRaWAN wireless protocol.
The LoRa wireless technology used in SDI-12-LS allows the device to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
SDI-12-LS is powered by a solar + Li-ion battery it is designed for long-term use up to 5 years.
Each SDI-12-LS is pre-loaded with a set of unique keys for LoRaWAN registrations, register these keys to the local LoRaWAN server and it will auto-connect after power on.
LoRaWAN 1.0.3 Class A
Ultra-low power consumption
Controllable 5v and 12v output to power external sensor
SDI-12 Protocol to connect to SDI-12 Sensor
Monitor Battery Level
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Support BLE and LoRaWAN remote configuration.
Support wireless OTA update firmware
Uplink on periodically
Downlink to change configure
Solar panel + 3000mAh Li-ion battery
MCU: 48Mhz ARM
Flash: 256KB
RAM: 64KB
Supply Voltage: Built-in Battery, 2.5v ~ 3.6v
Support current: 5V 300mA, 12V 100mA
Operating Temperature: -40 ~ 85°C
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Range: 0 ~ 20mA
Accuracy: 0.02mA
Resolution: 0.001mA
Range: 0 ~ 30v
Accuracy: 0.02v
Resolution: 0.001v
Solar panel + 3000mAh Li-ion battery
Capacity: 3000mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Smart Agriculture
SDI-12-LS SDI-12 to LoRaWAN Converter
Device Size: 195 * 125 * 55 mm
Device Weight: 420 g
Part Number: SDI-12-LS-XX-YY
XX: The default frequency band
AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band
EU433: LoRaWAN EU433 band
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
CN470: LoRaWAN CN470 band
YY: The grand connector hole size
M12: M12 hole
M16: M16 hole
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM23021004
The SDI-12-LB is a SDI-12 protocol to LoRaWAN Converter designed for SDI-12 sensor Smart Agriculture solution.
Reference: DWM23072302
The SPH01-LB LoRaWAN Soil pH Sensor supports BLE configure and wireless OTA update for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level IP68 waterproof.
Reference: DWM23122601
SDI-12-NB is an SDI-12 to NB-IoT Converter that supports BLE configuration and OTA update and is designed for Smart Agriculture sensors and Weather Station.
Reference: DWM25021901
The TC01/TC11-LB is a LoRaWAN Thermocouple Converter that measures the industrial environment temperature and then uploads it to the IoT server via the LoRaWAN network.
Reference: DWM24030102
TS01-LS is powered by a solar panel LoRaWAN Tilting Sensor for detecting large-scale equipment and supports BLE configuration and wireless OTA update.
Reference: DWM23122503
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU get the location data via GPS and set it to IoT server via LoRaWAN network. supports Motion Detection this feature will save power when no motion is detected.
Reference: DWM25021301
The D20-LS/ D20S-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use or use in soil or on roads supports BLE configuration and wireless OTA update, making users easy to use.
Reference: DWM24022602
The PS-LS-I sensors is powered by solar power + li-on battery with an Immersion Installation Type Air Water Pressure sensor which can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
Reference: DWM23072303
The DDS04-LB is a LoRaWAN 4-Channels Distance Sensor upports BLE configure and wireless OTA update for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM24081201
PB01 LoRaWAN Button is a LoRaWAN wireless device with one push button. PB01 transfers the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the environment temperature & humidity and will also uplink these data to IoT Server.
Reference: DWM25022001
DDS75-LS is powered by a solar-powered LoRaWAN Distance Detection Sensor that can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity, and presence detection, etc.
Reference: DWM24030103
The SE01-LS LoRaWAN Soil Moisture & EC Sensor is powered by Solar for IoT of Agriculture and supports BLE configuration and wireless OTA update.
Reference: DWM24011902
The AQS01-L is an Indoor LoRaWAN Air Quality Sensor is designed to measure the surrounding environment parameters include: CO2, Temperature , Relative Air Humidity and Air pressure, and then upload to IoT server via LoRaWAN wireless protocol.
Reference: DWM25021502
The D23-LS is a solar-powered LoRaWAN Temperature Sensor designed for waterproofing/Outdoor use and supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM25011301
DS20L LoRaWAN smart distance detector works with a standard LoRaWAN gateway which measures a range between 3cm ~ 200cm targets the applications such as smart cities, and building automation.
Reference: DWM23122602
LA66 USB LoRaWAN Adapter v2 is designed to fast turn USB devices to support LoRaWAN wireless features which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
Reference: DWM24090201
The PS-LB-D sensors with a Differential Pressure Type sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: DWM23122501
TS01-LB is an outdoor LoRaWAN Tilting Sensor which is specially designed for detecting the angle of trees, buildings or large scale equipment measures pitch and roll angle and converts to LoRaWAN wireless data and sends to IoT platform via LoRaWAN network.
Reference: DWM23101801
WSC2-LB is the Main Process Unit for Weather Station solution which is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.
The SDI-12-LS is a solar-powered SDI-12 to LoRaWAN Converter designed for Smart Agriculture solutions.
